www.CVOHARLEY.com

CVO Technical => Electronic Toys and Gadgets => Topic started by: fyreftr on January 01, 2018, 04:39:31 PM

Title: Amp location
Post by: fyreftr on January 01, 2018, 04:39:31 PM

Any advice on where to install an a Rockford Fosgate amp on a ‘13 Roadglide ? I’m installing a Aquatic av stereo and I can’t figure out where to mount the amp

Title: Re: Amp location
Post by: Puzzled on January 01, 2018, 07:58:42 PM

How big is the amp?

Mine was located on the side of the radio tray heading towards the speaker. I went with multiple small amps as opposed to one larger one due to space constraints.

Title: Re: Amp location
Post by: Cvostu on January 02, 2018, 01:26:20 AM

Might check with Paul yaffe bagger nation.     He sells Rockford.  He might have the mounting brackets you need.  I just put that amp in my old cvo Electra glide.  But that sat right on the radio.   That would be too easy for you.   Good luck.  Stuart.

Title: Re: Amp location
Post by: skratch on January 02, 2018, 01:47:16 PM

i have my amp mounted sideways on the inner right of the fairing, between the glovebox and the fairing sidewall.  using heavy duty velcro to hold it in place.  currently using a sound stream nano, but my old arc 125.2 amp fit there fine as well.  not sure which rf amp you're using, and whether it'll fit there or not.