www.CVOHARLEY.com

Custom Vehicle Discussions => CVO™ Limited => Topic started by: newseultra07 on July 07, 2018, 12:48:08 PM

Title: Wiring diagram
Post by: newseultra07 on July 07, 2018, 12:48:08 PM

Anyone have a wiring diagram for the can bus bikes could send me.  Trying to figure if I have my heated grips plugged in correct spot. Thanx in advance.

Title: Re: Wiring diagram
Post by: Unbalanced on July 07, 2018, 01:12:40 PM

Do you have a drop box or similar I could upload to?

Title: Re: Wiring diagram
Post by: newseultra07 on July 07, 2018, 01:33:29 PM

All I have is email address. No drop box.

Title: Re: Wiring diagram
Post by: skratch on July 07, 2018, 01:37:07 PM

if you go to the harley service information portal, you can get owners manuals and wiring diagrams for free.  if you have the vin for the bike, you don't even need to login.  if you want to look at other bikes, then you can register as an 'independent operator' and pull that same info up for different bikes.

https://serviceinfo.harley-davidson.com/sip/vehicle/lookupForm

Title: Re: Wiring diagram
Post by: newseultra07 on July 07, 2018, 03:08:04 PM

Quote from: skratch on July 07, 2018, 01:37:07 PM

if you go to the harley service information portal, you can get owners manuals and wiring diagrams for free.  if you have the vin for the bike, you don't even need to login.  if you want to look at other bikes, then you can register as an 'independent operator' and pull that same info up for different bikes.

https://serviceinfo.harley-davidson.com/sip/vehicle/lookupForm

Awesome info.  Thanx for that.  Got the diagram. Now to take back apart. 

Title: Re: Wiring diagram
Post by: newseultra07 on July 09, 2018, 10:21:49 AM

Been looking at the wiring diagram and can’t seem to find where the heated grips plug into. Anyone have any idea.  I didn’t pay attention when I unplugged them to see where were plugged into.