www.CVOHARLEY.com
CVO Technical => Twin Cam => Topic started by: hd-dude on March 11, 2006, 12:20:45 AM
-
First of all welcome to the site!! Second if you look in the Zippers forum they are coming out with a bolt in cam for the 103. Freedom cycles also has a bolt in cam for the 103 as well. These cams by both companies are meant to be a direct bolt in replacement for our motors. I know of other people that have used and Andrews 55g and a S&S 575 with good results. I am not ready to do mine yet but will be waiting on the Zippers product and the Freedom Cycles product before I make the change as they are designed for the 103's.
PS: and so your properly initiated....we need to see pics of your scooter because... [smiley=worthless.gif]
-
hd-dude, thanks for the fast feed back. I will check out Zipper and see what they have to offer.
-
Mack the Zippers cams have been tested and have been ground. They are at the heat treat process right now and should be ready in 2 weeks. The cams produced a very good TQ cruve and will be a very good bolt in cam. It is called THE RED SHIFT 575.
OH AND BTW WELCOME TO THE SITE stick around you will love this place!
Be Safe
THE DAWG
-
mackibc welcome to the site as you can tell you will get some great advice here. I believe that you would be happy with either cam.
-
mackibc,
Welcome to the site. Like you I want to go to gear drives, and am patiently waiting on the gear drive cams coming out soon from Zippers. I believe you will be pleased with the performance of these cams (hint, hint).
P.S. So you can be officially welcomed to this site we need pictures of your scooter.
[smiley=worthless.gif] [smiley=worthless.gif]
[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]
-
You may want to think about a Woods 400g , here's a dyno
If you give Bobby a shout he will give you his recommendations based on your needs and setup, he's a great guy.
-
I put an S&S570 in mine with a cometic .030 head gasket and I'll have to say it runs awfully well. Much improved over stock cams.
-
You may want to think about a Woods 400g , here's a dyno
If you give Bobby a shout he will give you his recommendations based on your needs and setup, he's a great guy.
In a stock 103 this cam is not even an option. A lot of people are looking for just a bolt in replacement cam to do away with the cam chains and tensioners. That is where Freedom Cycles and Zippers products come in. They have produced a bolt in option for the factory CVO 103 motor.
Be Safe
THE DAWG