Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ironpeddler]

Peddler,

Here are some other parts you may need to complete the forward control conversion


49171-04   EXTENDED REACH FORWARD CONTROLS        Harley Davidson
34616-02   BULLET SHIFT LEVER                                Harley Davidson
42683-02   AILERON BRAKE LEVER KIT                        Harley Davidson
50305-02   AILERON FOOTPEGS                                Harley Davidson
3655A   PANHEAD TORX SCREW                                Harley Davidson
4721           CAP SCREW                                           Harley Davidson
50912-72   SPRING WASHERS (2 FOOTPEGS)                Harley Davidson
6237           WASHER                                                Harley Davidson
7742           LOCK NUT                                                Harley Davidson
7778           NUT                                                        Harley Davidson
45665-01    Softail Rear Master Cylinder Cover                Harley Davidson
999002-77   DOT 5 BRAKE FLUID                                Harley Davidson


These are required if you require the Highway peg option (recommended, I am 6'3")

7887           FORWARD CONTROL HIGHWAY PEGS         KURYAKYN
50305-02   AILERON FOOTPEGS                                Harley Davidson
50912-72   SPRING WASHERS (2 FOOTPEGS)                Harley Davidson

Cheers
Aussie

Aussie:

The HD website says the master cylinder cover is not compatible with the forward control kit.  See below.

Harley-Davidson Extended Reach Forward Control Kit #49171-04 LVHD25

    * This kit extends the rider foot controls a full 3" forward of the stock location, providing the tall rider a comfortable riding position.
    * This comprehensive kit includes everything necessary for installation.
    * The chrome kit includes new chrome brake and shifter mounting assemblies, chrome shift rod, and all necessary hardware.
    * The kit is compatible with Original Equipment or accessory footpegs, brake and shift lever, and brake pedal and shifter peg.
    * Fits '00-'06 FX Softail models.
    * Not compatible with accessory Shift Linkages, Rear Brake Lines, Chrome Rider Footboard Hardware Kit P/N 33710-03, Rear Master Cylinder Cover P/N 45665-01 or Billet Forward Control Kit P/N 33907-01.

Peddler

[AUSSIE_FLSTFSE]

Peddler,

Here are some other parts you may need to complete the forward control conversion

3655A   PANHEAD TORX SCREW                                Harley Davidson
4721           CAP SCREW                                           Harley Davidson
6237           WASHER                                                Harley Davidson
7742           LOCK NUT                                                Harley Davidson
7778           NUT                                                        Harley Davidson

Aussie:

Just one each of the above items?

Peddler

Peddler,

To be honest I cant even remember what they are for. When I looked at some old invoices they were on the same one as the forward controls so they mst be needed & yes only 1 of each.

Cheers
Aussie

[AUSSIE_FLSTFSE]

Aussie:

The HD website says the master cylinder cover is not compatible with the forward control kit.  See below.

Harley-Davidson Extended Reach Forward Control Kit #49171-04 LVHD25

    * This kit extends the rider foot controls a full 3" forward of the stock location, providing the tall rider a comfortable riding position.
    * This comprehensive kit includes everything necessary for installation.
    * The chrome kit includes new chrome brake and shifter mounting assemblies, chrome shift rod, and all necessary hardware.
    * The kit is compatible with Original Equipment or accessory footpegs, brake and shift lever, and brake pedal and shifter peg.
    * Fits '00-'06 FX Softail models.
    * Not compatible with accessory Shift Linkages, Rear Brake Lines, Chrome Rider Footboard Hardware Kit P/N 33710-03, Rear Master Cylinder Cover P/N 45665-01 or Billet Forward Control Kit P/N 33907-01.

Peddler

Yeah I saw that too, once again it has been a while since I fitted it but I do not recall it being a problem. It is clearly shown fitted in the 2 pictures I posted above. It may have taken a very small mod to fit but if you can fit the extended reach controls I have no doubt you can also fit the chrome cover. I have purchased many parts that say they are not compatible &  I always manage to fit them with ease. The biggest gamble I took was the 2007 SERK speedo/tacho which also said it was not compatible but I found it was as easy as plug it in & every thing worked fine.

Cheers
Aussie

[ironpeddler]

Peddler,

To be honest I cant even remember what they are for. When I looked at some old invoices they were on the same one as the forward controls so they mst be needed & yes only 1 of each.

Cheers
Aussie

Aussie:

Did a little research and looks like those are the fasteners needed for the brake lever mounting.

Peddler

[AUSSIE_FLSTFSE]

Aussie:

Did a little research and looks like those are the fasteners needed for the brake lever mounting.

Peddler

That would have been my guess!

At 6'4" you would really enjoy the Highway peg set up. It does mean you will need a total of 3 sets of the AILERON FOOTPEGS all up if you have the pillion pegs as well.

Cheers
Aussie

[ironpeddler]

Agreed.  Already have the pillion pegs and have another set mounted on my engine guard which will be removed because the engine guard is also going to be removed. (required for the extended reach forward controls).  That means I need one more set for the highway pegs.  A little at a time.....

Peddler

[ironpeddler]

Peddler,

Here are mine installed with 3/4 inch wide spacers on the right side to give that extra clearance for the SE Heavy Breather or Zippers High flow (wide) filter

Cheers
Aussie

Aussie:

I just received my extended reach kit today. Question: Since you used the 3/4" spacers I assume the fastener package sent with the bike needs 3/4" longer bolts for the right side, correct?

Peddler

[AUSSIE_FLSTFSE]

Thats right & you should be able to pick 3 of these longer bolts up at your local nut & bolt supplier

cheers
Aussie

[ironpeddler]

Getting a little frustrating - got the extended reach forward control kit and brake lever, now the shift lever, part number 34616-02 cannot be found.  Chicago Harley doesn't have it. I then won a bid on ebay only to be informed they couldn't find it and then saw one on surdyke harley and again was notified it was no longer available. If any HD employees are out there and can search this part number at any dealership I would appreciate it. Any/all other options will be well received.

Peddler

[AUSSIE_FLSTFSE]

                                                                            peddler only click here

[ironpeddler]

Thanks Aussie!

Peddler

[ironpeddler]

Forward controls finally done! Special thanks to Aussie for his guidance along the way.

Peddler

[ironpeddler]

 another...

[ironpeddler]

 another...

[ironpeddler]

one more...