Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[WFP]

OK, my new Rineharts are here and so is the Stage I Ness Big Sucker.  My Dynotune is not scheduled until 5 JUN so I want to put them on with a base map.  I do not have any flashes from the Dealer soi the bike is stock.

Can anyone provide a map to me?

I am thinking about getting the ECM flashed by the dealer also but not sure when that will happen.

Thanks,
Bill

[The Mysterious Q!]

Hey bill did you check on Dynojets site for a canned map that is close to if not the same as your setup.When I got mine dynotuned the tuner told me I could use a map that is close for a while until I had a custom map made.
www.powercommander.com

[WFP]

Not sure any look good for the 103...there is a 2-1 map but with true duals, I feel that is important.

Maybe the freedom version would get me by.

I still want the base Stage I or is it II should the PC fail...

[hd-dude]

Bill;
I have the Freedom map if you need it.I think it will work fine with the Rineharts, PM me your email address

[WFP]

Bill;
I have the Freedom map if you need it.I think it will work fine with the Rineharts, PM me your email address

Thanks,
PM Sent!

[The Mysterious Q!]

You should flash the Stage II as a backup for PC failure.

[WFP]

My thoughts exactly...but I should get it done before paying for a tune!

/Bill

You should flash the Stage II as a backup for PC failure.

[grc]

My thoughts exactly...but I should get it done before paying for a tune!

/Bill

Bill,

Definitely get the H-D download first, since the PC builds on the map that is in your stock ECM at the time of the dyno tune.  I believe the download H-D has is called the Stage 1 Race calibration, p/n 34304-06, for the SE air cleaner and SE Pro mufflers.

Jerry

[The Mysterious Q!]

Yes Bill definately get your flash first.Its 150.00 for the download. But I think the Stage 2 has the higher rev limiter though.

[WFP]

PC has REV Extend or whatever it is called so either way, I'm OK.

Stage I given the stock cam...for now anyway!

/Bill

Yes Bill definately get your flash first.Its 150.00 for the download. But I think the Stage 2 has the higher rev limiter though.

[The Mysterious Q!]

Yes this is true you can for the 20 extra dollars have the PCIII download for that. I guess if the PC goes down you got bigger problems than a rev limiter. [smiley=huepfenlol2.gif]

[WFP]

The new PC come with it already...or so I thought...

Yes this is true you can for the 20 extra dollars have the PCIII download for that. I guess if the PC goes down you got bigger problems than a rev limiter. [smiley=huepfenlol2.gif]

[The Mysterious Q!]

I think it has the capability to increase the rev limiter but it is a extra download you have to put in it.

[grc]

The PowerCommander PCIII-USB should already have the Rev-Xtend feature if it was made after a certain date, see info from PC web site below:
-----------------------------------------------------------------------------
RevXtend

[highlight]If your serial number(shown in the upper right corner) is higher than 060201000001 upgrade has already been installed.[/highlight] This upgrade is not for V-Rod model motorcycles      .
To access the Rev Xtend and start up fuel features open the Power Commander Control Center software. This software needs to be version 3.1.3 or newer.
While the software is communicating to the PCIII hit CTRL-F on your keyboard. This will bring up a window called Power Commander Features Dialog. Check the box next to the feature that you want to enable.
If you check the Extend Redline feature then your bike will hit the rev limiter at 6200rpm. A different RPM setting can not be entered. If you ever want to turn this feature off just uncheck this box.      
-------------------------------------------------------------------------------

Jerry

[Eqcons]

Not sure any look good for the 103...there is a 2-1 map but with true duals, I feel that is important.

Maybe the freedom version would get me by.

I still want the base Stage I or is it II should the PC fail...

But is there a download for the CUSE from HD?  I thought they didn't do any for the 06 bikes, having the EPA stuff forced on them, no more SE pipes etc.....?