California Highway Patrol GUIDELINES FOR LEGAL MOTORCYCLE LANE SPLITTING.
Lane splitting by motorcycles is legal in California when done in a safe and prudent manner.
Motorists should NOT take it upon themselves to discourage motorcyclists from lane splitting.
Intentionally blocking or impeding a motorcyclist in a way that could cause harm to the rider is illegal (CVC 22400). Opening a vehicle door to impede a motorcycle is illegal (CVC 22517).
1. You can help keep motorcyclists and all road users safe by:
2. Checking mirrors and blind spots, especially before changing lanes or turning
3. Signaling your intentions before changing lanes or merging with traffic.
4. Allowing more following distance, three or four seconds, when behind a motorcycle so the motorcyclist has enough time to maneuver or stop in an emergency.
Motorcyclists who are competent enough riders to lane split, should follow these general guidelines if choosing to lane split:
1) Travel at a speed that is no more than 10 MPH faster than other traffic – danger increases at higher speed differentials.
- A speed differential of 10 miles per hour or less allows an alert, competent rider enough time to identify and react to most dangerous situations that can occur.
- The greater the speed differential, the less time a rider has to identify and react to a hazard.
2) It is not advisable to lane split when traffic flow is at 30 mph or faster --- danger increases as overall speed increases.
- At just 20 mph, in the 1 or 2 seconds it takes a
rider to identify a hazard, that rider will travel approximately 30 to 60 feet before even starting to take evasive action.
Actual reaction (braking or swerving) will take additional time and distance.
- Braking and stopping distance varies greatly based on a multitude of factors (rider, machine and environment).
- As speed increases, crash severity increases.
3) Typically, it is safer to split between the #1 and #2 lanes than between other lanes.
- Other road users are more accustomed to motorcycles splitting between the #1 and #2 (furthest left) lanes.
- Avoid splitting in lanes near freeway on-ramps and exits.
- Avoid splitting lanes when another motorcycle rider is splitting between other nearby lanes as cars may make additional room for one rider and accidentally reduce space for another.
4) Consider the total environment in which you are splitting, including the width of the lanes, size of surrounding vehicles, as well as roadway, weather, and lighting conditions.
- Some lanes are narrower than others, leaving little room to pass safely. If you can't fit, don't split.
- Some vehicles are wider than others -- it is not advisable to split near wide trucks. If you can't fit, don't split.
- Know the limitations of your motorcycle --- wide bars, fairing and bags require more space between vehicles. If you can't fit, don't split.
- Avoid splitting on unfamiliar roads to avoid surprises such as poor road surfaces.
- Seams in the pavement or concrete between lanes can be hazardous if they are wide or uneven.
- Poor visibility, due to darkness or weather conditions, makes it difficult for riders to see road hazards and makes it more difficult for drivers to see you.
- Help drivers see you by wearing brightly colored protective gear and using high beams during daylight.
5) Be alert and anticipate possible movements by other road users.
- Be very aware of what the cars around you are doing. If a space, or gap, opens up next to your lane, be prepared react accordingly.
- Always be prepared to take evasive action if a vehicle changes lanes.
- Account for inattentive or distracted drivers.
- Riders should not weave back and forth between lanes or ride on top of the line.
- Riders should avoid lingering in blind spots.
- Never ride while impaired by drugs, alcohol or fatigue.
- Constantly scan for changing conditions.