Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Rear License Please Bracket Removal Help Please  (Read 217 times)

0 Members and 1 Guest are viewing this topic.


  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 548
  • 2UP3DOWN

    • CVO1: 2021 FLHTCUTGSE - Sunset Orange &amp Sunset Black
    • CVO2: 2013 FLHTCUSE8 Typhoon Maroon
    • CVO3: 2009 FLTRSE3 Silver Surfer - 2013 FLHRSE5 Crushed Saphire
Rear License Please Bracket Removal Help Please
« on: October 11, 2021, 08:56:58 AM »

Hi All.

Recently traded up from a 2018 Tri Glide to a 2021 CVO Tri Glide.

My 2018 had a chrome Kuryakyn license plate bracket that I installed.  Wasn't too hard as I recall.   I am wanting to swap that over to the CVO but having trouble removing the lower part of the bracket (The section that has the wide horizontal reflector - that I also want to remove)…    There are 3 Torx screws that hold that bracket on.     Do I simply remove the torx screws.?  Or do I have to disassemble the rear door hatch and remove the plastic cover/housing..?

Attaching a picture:  Number 4 shows the 3 torx screws, however its not clear where they screw in to..  assuming the holes in number 18 might be threaded..


Page created in 0.103 seconds with 20 queries.