Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[PR3VS56]

Can you use the stock cables and wires on the 10" bars?

Wires, yes.  Brake line, yes.  Clutch cable, no (I went +4", but +3" if made would be perfect).

[arthurman83]

PR3VS56, could you post a picture of the 10" bars for comparison?

[TBird]

Bars look great!

Does the 8" Klockwerks windshield give any wind protection at all? I just ordered one for around town cause they look great but will put on a larger one for the long highway trips.

[JasonDeezy]

At 5'7" tall (short?) the wind hits me right in the face. I was going to get a taller windshield but hey, then I wouldn't be "in the wind". The wind does stay off of my body pretty much so I don't find myself fighting it on the freeway. The Flare does help a bit, but just a little...

[TBird]

The look is worth a little wind.

[Guilty]

I am really liking the looks of the Yaffe monkey bars on your SERG! I prefer more pullback but they are definitely styling.

[Crusty]

The look is worth a little wind.

That's why I stuck with the stock!

[twmartin1970]

Not sure if mine are 10's or 12's, but used all stock cables and wires.

Can you use the stock cables and wires on the 10" bars?

[infanterene]

Those look like 12's. Are you sure you were able to use ALL the stock lines? If so i'm in.

[PR3VS56]

PR3VS56, could you post a picture of the 10" bars for comparison?

Sure.  BTW, the CVO's might be able to use the stock clutch line.  I was able to use my stock brake line (hydraulic), but had to replace the stock clutch cable (non-hydraulic) due to the bend.  

[Riders Claw]

Jason - Looks AWESOME! 
Those chrome ties are nice, but it would also look good with a smaller black tie (3") used to tie the Rider's Claw cable to the clutch cable... as opposed to completely around the bar.  Mind if I use your pics on my Rider's Claw Gallery Page?  We're redisigning our web site to include.   

[JasonDeezy]

The picture is yours to use!

[Highjagger]

@ PR3VS56 ,
 how did you mount the GPS ?
Could you please explain and post a detailed pic ?

[PR3VS56]

@ PR3VS56 ,
 how did you mount the GPS ?
Could you please explain and post a detailed pic ?

http://www.cvoharley.com/smf/index.php?topic=35605.0;all

And, I'm working on a slight variation to move it up and over (toward the radio) just a bit.  I might just offset the hole & see how that works.  If possible I'd like to move it forward about 1/2" too (toward me).  When it's all dialed in maybe we can duplicate it for members.

The machinist I'm working is expensive, but he has some NICE machinery & is very precise.  Any machinists on the board?

[jettjocky]

Very nice & looks good, but @ 64 & being a looooooong distance rider my arms would go to sleep within ten mins.,  ohhhhh to be young again...... have fun.