Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 3 [All]

Author Topic: How does this work?  (Read 6978 times)

0 Members and 1 Guest are viewing this topic.

quicked

  • quicked
  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 52
  • GOTTA RIDE
    • FL


    • CVO1: 2010 inferno orange flstse
    • CVO2: 2009 electric orange fltrse3
    • CVO3: 2005 cherry seeg,sold 1994 black,polish and chrome FATBOY 117 CUSTOM S&S SIDEWINDER,BAKER TORQUEBOX,CHAINDRIVE
Re: How does this work?
« Reply #1 on: July 30, 2018, 07:47:25 AM »

compensator needed to absorb drivetrain pulse-shock,no compensater= flywheel-drive train- abuse,wish curing compensater issues were as simple as a solid gear
Logged
09 fltrse3, custom hicomp124,,s&s flywheel,axtell cyl,,redshift 647 cams.s&s lifters,roller rockers,jims titanium pushrods.weldedported heads,s&s lifter pushrods,feuling beehive springs,s&s tc3 oilpump cam plate,se 5.3 inj,se 58mm tbody,baker grudgebox,barnett clutch,aims vp,diamondeng race fastnrs,thundermax,d&d boarzilla,2010 flstse,SE10.5 pistons,ported heads,s&s pshrdslifters,rollrrockers,woodscamstw9b6,SE6.2inj,hpi55tbody,barnettclutch,diamondeng race fasteners ,pm calipers,rb race header

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: How does this work?
« Reply #2 on: July 30, 2018, 08:17:03 AM »


That BDL piece has been around for awhile, and it isn't much if any better than a simple solid sprocket.  I wouldn't recommend it.  The Harley Big Twin needs an effective compensator to protect the crankshaft and primary components.

JMHO - Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

Rooster

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5180
  • FLhtcuse2.ORG
Re: How does this work?
« Reply #3 on: July 30, 2018, 09:33:08 AM »

Back in 08 my comp was replaced with Evo Industries solid sprocket. Made my arms and legs fall asleep 55mph and above. Really weird feeling. Had it taken out and first revision of HD comp assembly installed been in there since. I think what helped at Jim Hddude's advise Used Baker Primary bearing.
Logged

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: How does this work?
« Reply #4 on: July 30, 2018, 05:02:16 PM »

If your having problems with the Harley "compensator" , I can highly recommend the "Compensaver", but it only worth installing with a new or nearly new compensator.

It works to cover the compensator with a constant flow of primary oil, using a collecting tray beneath the chain to collect the oil then running past a magnet and then through holes and on to the sprockets of the compensator, the area that gets starved in the normal set-up.

I have been running one since it was launched and so far has been fine.
Logged
WHUFC   COYI

dayne66

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4037
    • BC


    • CVO1: '12 Ruby/Typhoon SG
    • CVO2: '15 Superior Blue FLD Switchback
Re: How does this work?
« Reply #5 on: July 31, 2018, 10:49:02 AM »

Just had the latest rendition of Harley's compensator installed under ESP. It also has the glue-in tray to direct oil to the places that were not getting oil. This one will buy me enough time to research an aftermarket replacement.
Even though I asked....I am sure they didn't check the tensioner or the chain.....or the bearings. I still hear  a bit of chain slap and have the clunk into first....and hard to find neutral. Will be ordering a tensioner from SOHB...and checking things out inside ther myself!
Logged
"The only true wisdom is in knowing you know nothing." Socrates

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #6 on: July 31, 2018, 03:58:03 PM »

I wasn't thinking of going that route.  I was being  curious whilst I was sloshing around in the paddling pool what benefit if any if one was installed. I see what you're all saying that the compensator is more like a shock absorber for the motor and primary components. Thanks for the input
BTW. Just to pre warn you this most likely won't be the last dumb question I'll ask  :huepfenlol2:

« Last Edit: July 31, 2018, 04:02:02 PM by longlast »
Logged

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: How does this work?
« Reply #7 on: July 31, 2018, 05:25:40 PM »

Dynn66

If you have just had a new Compensator fitted, even with the glued in oil tray (which only helps getting oil to the centre of the comp),

it does not stop the lobes from excessive wear.

You should do a bit of research on the "Compensaver"  at  compensaver.com.

As I said "it works"  very well.

 
Logged
WHUFC   COYI

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: How does this work?
« Reply #8 on: July 31, 2018, 05:44:56 PM »



Well there you go, it looks like HD have finally listened!!!

The "compensaver" has been suspended from Sale, they due to the fact that Harley have now copied there design so closely that they have finally got a reliable Compensator.

Took them long enough!
Logged
WHUFC   COYI

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #9 on: August 01, 2018, 04:25:39 AM »

I have the stock compensator in my 07 ultra classic with 22k on it, so far it's doing good.
At some point I'm sure it'll need to be changed.

I see that the biggest problem with a compensator is the lack of lube getting to the inner part of the compensator any thoughts as to what would be a good compensator to upgrade too that's  reasonably  priced ?
Logged

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: How does this work?
« Reply #10 on: August 01, 2018, 09:59:24 AM »

You have the choice of 2 (don't even think about a compensator eliminator, the compensator is there for a reason),

1. the Baker compensator, cant comment on its reliability as never used one, but do know they are on there 3rd or 4th version.

2. The Harley SE compensator HD-40100076,  £243.76.  from Harley Davidson Jersey (no VAT to pay)  appears to be working quite
    Well.

    Mine is a slightly earlier version, it had the Radial bearing, which was very noisey, the latest version has gone back to a fibre washer,
    its much quieter.

One thing, do you have a seperate Stator cover and compensator, or is yours welded together with the comp spring pack assembly?

If so you will need to get a new Stator rota cover or cut the spring cup off the old one to enable the SE Comp to fit.
Logged
WHUFC   COYI

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #11 on: August 01, 2018, 12:35:11 PM »

You have the choice of 2 (don't even think about a compensator eliminator, the compensator is there for a reason),

1. the Baker compensator, cant comment on its reliability as never used one, but do know they are on there 3rd or 4th version.

2. The Harley SE compensator HD-40100076,  £243.76.  from Harley Davidson Jersey (no VAT to pay)  appears to be working quite
    Well.

    Mine is a slightly earlier version, it had the Radial bearing, which was very noisey, the latest version has gone back to a fibre washer,
    its much quieter.

One thing, do you have a seperate Stator cover and compensator, or is yours welded together with the comp spring pack assembly?

If so you will need to get a new Stator rota cover or cut the spring cup off the old one to enable the SE Comp to fit.

It's the separate type from the compensator.  I'm getting no longer available on that part # from Jersey search list
Logged

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: How does this work?
« Reply #12 on: August 01, 2018, 02:22:58 PM »

Are you sure you put the correct number in 40100076 ,  I just checked and it says its available £243.79.  ??


https://www.jerseyh-d.com/PartSearch?search=40100076
Logged
WHUFC   COYI

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #13 on: August 01, 2018, 07:33:00 PM »

I must be losing my nuts n bolts, I tried it a few time kept getting the same thing, (No longer available)  :-X

Tried the number again just now and the bloody thing worked  :nixweiss: :huepfenlol2:

It shows no pic of the part  how does one know this is the updated version .

I've been looking and I think I found the upgraded one. If I'm right it has oil pick up portal around the circumference of the body or

Is this the newer version

https://www.ebay.co.uk/itm/232854499073?ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F710-53481-19255-0%252F1%253Fff3%253D2%2526toolid%253D10044%2526campid%253D5338268676%2526customid%253D3f645feb-ea1b-4195-945b-a707ebb4f0a7%2526lgeo%253D1%2526vectorid%253D229508%2526item%253D232854499073%2526srcrot%253D710-53481-19255-0%2526rvr_id%253D1618239811831%2526rvr_ts%253Df7d810091640ac3d67849640fff892f0&ul_noapp=true
« Last Edit: August 01, 2018, 07:40:57 PM by longlast »
Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: How does this work?
« Reply #14 on: August 01, 2018, 10:35:52 PM »

The one in that link might not be an H-D part, its identified as an Ultima part (aftermarket company).    It doesn't come with the new style rotor so you would need to buy that separately.  That one also comes with the noisy thrust bearing Trippy mentioned.

The one in the 2018 SE Catalog is shown in the attachment.  If you still have the stock 2007 rotor, you will need the new style rotor.  There is a separate kit, marked on the attachment, that comes with the new rotor.  If you have the new style rotor, then you just need first one listed.

Jerry
« Last Edit: August 01, 2018, 10:43:55 PM by grc »
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: How does this work?
« Reply #15 on: August 01, 2018, 10:38:04 PM »


The attachment shows the two styles of rotors.  If you are still running the same compensator that came with the bike from the factory, you will need the new style to install the SE compensator.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #16 on: August 02, 2018, 07:25:27 PM »

Thanks,
Looks like I'll have to go the kit  40100061 i see it states  that SE PRO PERFORMANCE 129 has the needle bearing thrust washer supplied with it. As mentioned it's better to have the solid type thrust washer that would have to purchased   separately and do away with the needle bearing type
« Last Edit: August 02, 2018, 07:28:51 PM by longlast »
Logged

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: How does this work?
« Reply #17 on: August 03, 2018, 12:40:11 PM »

I believe the latest version does come with a fibre washer instead of the Radial bearing.

As for the Stator cover, it really is not that difficult to modify your stator cover,

1.  using mole grips straighten the crimps on the outer edge of the spring cup, this will allow the springs to come out, leaving an empty
     cup.


2. using a angle grinder and metal cutting disc, cut around the cup as closely as you can to the stator cover, then using a metal grinding

   disc grind away the remainder of the cup, and finish off with a flap disc.


You just have to be careful not to drop the stator or give any sharp blows, as the magnets on the inside can come off!!




   
Logged
WHUFC   COYI

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: How does this work?
« Reply #18 on: August 03, 2018, 01:20:25 PM »

Longlast


Just had a look round my many boxes of parts, and guess what I found, HD part number 30041-08, Harley Stator cover,
its been in the loft for a couple of years (wrapped and boxed of course) and in very good condition with no signs of wear, if you want to make me an offer and pay the postage its yours (your in London I believe, so you can pick it up if you want).


PM me if interested.
Logged
WHUFC   COYI

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #19 on: August 03, 2018, 03:01:32 PM »

Longlast


Just had a look round my many boxes of parts, and guess what I found, HD part number 30041-08, Harley Stator cover,
its been in the loft for a couple of years (wrapped and boxed of course) and in very good condition with no signs of wear, if you want to make me an offer and pay the postage its yours (your in London I believe, so you can pick it up if you want).


PM me if interested.
^

PM sent.
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #20 on: August 13, 2018, 11:40:34 AM »

Well I've gone for the 2016 compensator assembly  36500034A  with the 83936-09 spring pack 

I was informed that the 40100076 is 2017 for the m8 motors  and all most 100.00 higher in cost

Hope it all going to fit. :confused5:
Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: How does this work?
« Reply #21 on: August 13, 2018, 11:50:46 AM »


I assumed you would want the complete kit that includes the drip tray that's epoxied into the outer primary cover to direct oil to the compensator.  The numbers you mentioned are the individual part numbers for the repair kits, for those who already have the SE style compensator.  They will work, you just won't get the tray that's in the kit. 

https://www.cvoharley.com/smf/index.php?topic=109488.msg1402767#msg1402767

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #22 on: August 13, 2018, 03:58:52 PM »

I assumed you would want the complete kit that includes the drip tray that's epoxied into the outer primary cover to direct oil to the compensator.  The numbers you mentioned are the individual part numbers for the repair kits, for those who already have the SE style compensator.  They will work, you just won't get the tray that's in the kit. 

https://www.cvoharley.com/smf/index.php?topic=109488.msg1402767#msg1402767

Jerry

That's right Jerry,

I had to get it all starting from scratch. I've got the oil deflector tray with the epoxy the thrush washer to replace the needle bearing that comes in the compensator assembly.  The 07 compensator assembly and rotor are going

Here's a break down of what I've got.

Compensator assembly ,.....36500034A   189.00

Thrust washer,......................40100064       11.50

Oil Deflector cvo,...................62700063       12.40

Adhesive epoxy kit,...............11100088        43.74

Rotor,.................30041-08 and spring pack,..........83936-09     50.00  supplied  by trippy  :2vrolijk_21:

It should all work  :-X




Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: How does this work?
« Reply #23 on: August 13, 2018, 04:42:05 PM »


 :2vrolijk_21:   Looks like you've got it covered.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #24 on: August 13, 2018, 04:53:24 PM »

:2vrolijk_21:   Looks like you've got it covered.

Jerry

Sure hope so mate, if not I'll be so far in the dog house I wouldn't be able to talk bike for months . Probably have to move into the garage as well.  :P
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: How does this work?
« Reply #25 on: August 13, 2018, 05:38:15 PM »

Sure hope so mate, if not I'll be so far in the dog house I wouldn't be able to talk bike for months . Probably have to move into the garage as well.  :P

Then you'll be really happy you've got that garage  :huepfenlol2: !
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #26 on: August 13, 2018, 08:09:33 PM »

Then you'll be really happy you've got that garage  :huepfenlol2: !


 :D  :D  :D especially  now I've got the suds cooler in and up n running Don  :drink:  :drink: :drink: second thought knowing the wife she'll probably take it out,........that would really heart  :'(
Logged

J.D.

  • Guest
Re: How does this work?
« Reply #27 on: August 13, 2018, 08:13:44 PM »

$44 for epoxy?  That must be some magic glue!
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #28 on: August 13, 2018, 09:08:53 PM »

$44 for epoxy?  That must be some magic glue!

I know tell me about it damn nearly choked on my beer and it come out my noise,.....hate it when that happens  :huepfenlol2:

I didn't buy it lightly I'd looked on line( eBay ) it was the high temp I going for and didn't feel comfortable with what I was seeing ( the last thing I'd want to happen is the tray to detach ) so I went with the recommend part number epoxy.

I considered and looked at that magic glue from your side of the pond  "Gorilla Epoxy " but the temp rating is only 80°c
Logged

J.D.

  • Guest
Re: How does this work?
« Reply #29 on: August 13, 2018, 09:16:38 PM »

JB Weld.  :orange: :mango: :bananarock: :apple: :carrot: :jalapeno: :cucumber: :pepper: :pineapple:
Logged

dayne66

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4037
    • BC


    • CVO1: '12 Ruby/Typhoon SG
    • CVO2: '15 Superior Blue FLD Switchback
Re: How does this work?
« Reply #30 on: August 14, 2018, 07:26:19 AM »

I think the epoxy only comes in a 6 pack.....that's why so much $.
Logged
"The only true wisdom is in knowing you know nothing." Socrates

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #31 on: August 14, 2018, 08:53:41 AM »

Noòoo you kidding me. Part number just said kit.  I'll find out when it gets here should be here by Friday with the the other parts. Could also be because it's got the HD logo and made in China stamp on the package  :-\  :nixweiss:

https://www.jerseyh-d.com/PartSearch?search=11100088
« Last Edit: August 14, 2018, 09:04:10 AM by longlast »
Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: How does this work?
« Reply #32 on: August 14, 2018, 02:03:15 PM »


When that plastic tray deal first came out one of our enterprising members did some research and found the actual source of that specialized epoxy, as well as places people could order it.  I seem to remember it was pretty expensive even before Harley added its mark-up.

Jerry

Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #33 on: August 14, 2018, 02:31:37 PM »

The cost for that part in the Jersey HD link is a tax free cost.

Anything from Jersey  UK  is tax free. Helps on the pocket book. :)
Logged

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: How does this work?
« Reply #34 on: August 14, 2018, 03:29:02 PM »

JB Weld  has been banned by the European Union,  Roll on BREXIT. 
Logged
WHUFC   COYI

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #35 on: August 15, 2018, 12:02:55 PM »

JB Weld  has been banned by the European Union,  Roll on BREXIT.

Didn't know that.

I had ordered some of that  jb  weld before and it never arrived,  had to claim back from eBay . It's still on eBay and says fast UK delivery not a thing said on it being banned
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: How does this work?
« Reply #36 on: August 15, 2018, 02:21:22 PM »

Had noticed the following while farting around at their website.  Last year some time....?

J-B Weld Original – Illegal in the UK
All J-B Weld products have been discontinued in the UK. The packaging supplied by J-B Weld is illegal as it does not comply with EU Regulations and is therefore not possible to import to the UK.

A replacement adhesive range, Power Maxed Adhesives, is available at: http://www.powermaxed.com/adhesives/

The replacement to the J-B Weld Original can be found at: Power Maxed Steel Power Epoxy
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #37 on: August 15, 2018, 04:00:30 PM »

It seems like the left-hand don't know what the right-hands  doing. This is what I ordered for an unrelated little job 3 -4 month ago but like I said never arrived. 

But it's still up on eBay as of this moment  :nixweiss:

https://www.ebay.co.uk/itm/JB-WELD-HIGH-HEAT-TEMPERATURE-RESISTANT-EPOXY-PUTTY/253743252927?epid=18021328464&hash=item3b1446c5bf:g:-FQAAOSweUlbRLa0
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #38 on: August 17, 2018, 07:26:28 AM »

Parts arrived today from forum member "trippy" Cheers Mark :2vrolijk_21:  :2vrolijk_21:

Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: How does this work?
« Reply #39 on: August 22, 2018, 11:07:29 AM »

Remainder of the compensator parts came today.  Now it's the mater of putting it in   :)

The needle bearing I'm replacing with a thrust washer
« Last Edit: August 22, 2018, 11:09:26 AM by longlast »
Logged

gmeikle

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 355
  • 2008 FXSTSSE2

    • CVO1: 2008 FXSTSSE2 Diamond Black
Re: How does this work?
« Reply #40 on: April 18, 2019, 01:27:19 AM »

Revamping this thread folks. Been 3 months and I am ready for another teardown. Thanks for all previous correspondences.

I have 2 different new thrust washers. Suspecting the needle roller bearing 3 part thrust washer may be the main source of my primary noise

A new "PEEK" thrust washer part number 40100064

AND a new PART NUMBER 6557 THRUSTWASHER

Longlast which one did you eventually use ?

I also have a new genuine HD primary chain which may as well go in at the same time. The latest/greatest genuine auto tensioner is already in there since last teardown.

I have done 1000 K's and was "hoping" the thing would settle down but alas not to be. 2000 RPM has a whirring/chattering just at cruising speed that does not fill me with confidence !!
Logged
No illegitimi carborundum
Pages: 1 2 3 [All]
 

Page created in 0.222 seconds with 24 queries.