www.CVOHARLEY.com

CVO Technical => EVO => Topic started by: myemailisscott on December 03, 2017, 09:53:07 PM

Title: Anyone try running a red shift 715 or 687 cam in large engines
Post by: myemailisscott on December 03, 2017, 09:53:07 PM

I have a127 and I’m looking for a new cam


Sent from my iPhone using Tapatalk

Title: Re: Anyone try running a red shift 715 or 687 cam in large engines
Post by: hrdtail78 on January 02, 2018, 04:50:27 PM

I am going to try the 715 in my 127.  Had to clearance my case and lifter blocks.  The Andrews 88 would of cleared both.

I setting them at 14:1 and gonna use ethanol.  If it was a straight up street bike.  I have had good luck with powerhouse's 620.

Title: Re: Anyone try running a red shift 715 or 687 cam in large engines
Post by: wfolarry on January 16, 2018, 07:14:29 PM

715 in a 124 @ 14:1 170 hp. Had an old set of Zippers billet heads that I worked over. 2" intake.
Did his twin brothers with B2 heads. That one made more power but it never had enough carb for the heads. Lost his job & sold it. Great cam. :thumbup: