www.CVOHARLEY.com
CVO Technical => Milwaukee-Eight => Topic started by: MCE on October 01, 2018, 05:35:03 PM
-
What's the current cubic inch limit of an M8? tia
-Matt
-
there are 151 cubic in kits in development already
https://vtwinvisionary.com/leading-edges-151ci-kit-for-milwaukee-eight/
how much bigger it can be punched out, will be fun to see
-
I'm drooling! What's available as of now?
-
that is all I have seen so far. Only happened to see that on instagram
-
I used Tman 124,
-
Revolution had a 139 drag racing at Sturgis this year and had it at the drag specialties Madison show.
-
My local Harley said at their schooling by the MoCo, they were told that the current M8 was built to handle up to 130ci without case mods. But as of yet they have not come up with anything larger than a 117 ci displacement. I can only assume it has to do with EPA compliance issues. But they said they were also told, "bigger is coming". They are thinking that the 114ci will be the new normal powerplant with a 121 or 124 offered in the CVO.
-
My local Harley said at their schooling by the MoCo, they were told that the current M8 was built to handle up to 130ci without case mods. But as of yet they have not come up with anything larger than a 117 ci displacement. I can only assume it has to do with EPA compliance issues. But they said they were also told, "bigger is coming". They are thinking that the 114ci will be the new normal powerplant with a 121 or 124 offered in the CVO.
I can tell you this; The head's were designed with something big in mind.
-
S&S just launched their 107-124 kits, 4.250 bores bolt on which will give 114/117-128 kits to follow
-
Yep just was emailed the Info on SS 124 bolt on kit for 107s 2200 bucks. But one running around our area already at 131 and he puts touring miles on it
-
If that's the case, I have a recipe for a cylinder head that will blow the lid off on a big motor.
-
The Leading Edge link is dead now. They must have given up on the 151 kit.
-
https://instagram.com/leadingedgehp?utm_source=ig_profile_share&igshid=1vz8tswcojy62
Some eye candy in their instagram
-
Frank D is working on a production 155.