Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: 2015 cvo valve spring  (Read 7851 times)

0 Members and 1 Guest are viewing this topic.

myanoch

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 81
    • IN

    • CVO1: 2011 cvo softail convertible
2015 cvo valve spring
« on: November 08, 2015, 01:48:48 PM »

part #18272-00   anyone know max lift of these springs
looking to install se585 cams
Logged
Mike

hawgzilla

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 179
Re: 2015 cvo valve spring
« Reply #1 on: November 08, 2015, 02:07:04 PM »

If those are the stock CVO springs, the SE 585's are not a problem.
Logged

myanoch

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 81
    • IN

    • CVO1: 2011 cvo softail convertible
Re: 2015 cvo valve spring
« Reply #2 on: November 08, 2015, 02:14:57 PM »

they are stock springs  dual with no damper
thanks
Logged
Mike

johnsachs

  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 747
Re: 2015 cvo valve spring
« Reply #3 on: November 08, 2015, 07:33:59 PM »

If using those springs, you better check coil bind at your spring installed height.
John
Logged

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: 2015 cvo valve spring
« Reply #4 on: November 11, 2015, 02:48:03 PM »

You may want to look at a set of AVV 600 lift springs instead. As you will be ok with those using that cam if you do not have the proper tooling to check seat pressure and coil bind etc.

Being that you are dealing with stock heads many times what it should be is not what it is.
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: 2015 cvo valve spring
« Reply #5 on: November 11, 2015, 04:15:32 PM »

We stock/use the .650" AV&V's here, to give the client the versatility of being able to move around with different cams, if so desired. :)
Scott
Logged

Ridgerunr

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 921
  • www.CVOHARLEY.com
    • TN

Re: 2015 cvo valve spring
« Reply #6 on: November 12, 2015, 07:33:43 AM »

We stock/use the .650" AV&V's here, to give the client the versatility of being able to move around with different cams, if so desired. :)
Scott

Anyone know the seat pressure of these? Thanks.
Logged
2004 Roadglide 113" (sold)
2014 CVO RoadKing
2015 RGS

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: 2015 cvo valve spring
« Reply #7 on: November 12, 2015, 07:56:18 AM »

Below are stated specs , the issue is that not all are going to be at the right installed height. Some of these are short.. so your installed is less that spec and you have more seat psi and less to coil bind.  With that said check your set up .. Hope this helps

From AV&V
600 spring

175 @ 1.835
165 @ 1.860
155 @ 1.900


650 spring

178 @ 1.860
172 @ 1.880
166 @ 1.900

Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: 2015 cvo valve spring
« Reply #8 on: November 12, 2015, 10:15:54 AM »

Also take note that the seat pressures are actually higher than the stock springs which are about 155#
The stock spring has a higher rate though so open pressure exceeds the beehive
Logged

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: 2015 cvo valve spring
« Reply #9 on: November 14, 2015, 11:13:20 AM »

And a double-wound, and then with a flat-wound harmonic dampner, has a surge to them, where a "progessive" beehive, is just that, a nice progressive rate.
Scott
Logged

Dietea

  • Newbie
  • *
  • Offline Offline
  • Posts: 33


    • CVO1: FLHTCSE
    • CVO2: FLTRXSE2
    • CVO3: EL-52 and FLH-66
Re: 2015 cvo valve spring
« Reply #10 on: November 15, 2015, 05:11:32 AM »

I have similar problem with SE 585 cams. They recommended replace valve springs when installing these valves.

Do anybody knows what is valve stem diameter @ 2013 CVO 110cid engine?
Spring supplier like AV&V and Kibblewhite  has two stem diameters available: 5/16" and 7mm. I cannot found clear answer on the web pages what springs should be ordered to CVO 110cid engine.

Any recommendations to SE 585 valve springs?
Valve lift is: .584"
Logged
2013 FLTRXSE2
HD-SE 585 cam
HD-SE perfect fit pushrods
S&S premium high tappets
HD-SE High compression pistons
HD-SE 58 TB
HD-SE high flow injectors 5,3g/s
HD-SE Agitator air cleaner 58mm back plate
Headworks
Jackpot 2/1/2 ceramic coated stainless steel h.pipe
Fullsac 1,75
Power Commander V tuned by Fuel Moto
Autotune pro

hawgzilla

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 179
Re: 2015 cvo valve spring
« Reply #11 on: November 15, 2015, 09:50:44 AM »

Harleys' tech support tells their dealers that the CVO 110 springs are fine with the SE 585 cams.  Have the engine builders here found that not to be true on any heads you have inspected?  It sounds like they must be close from some of the responses. 
« Last Edit: November 15, 2015, 09:52:35 AM by hawgzilla »
Logged

wfolarry

  • Vendor
  • Newbie
  • *
  • Offline Offline
  • Posts: 49
Re: 2015 cvo valve spring
« Reply #12 on: November 15, 2015, 10:14:05 AM »

I have similar problem with SE 585 cams. They recommended replace valve springs when installing these valves.

Do anybody knows what is valve stem diameter @ 2013 CVO 110cid engine?
Spring supplier like AV&V and Kibblewhite  has two stem diameters available: 5/16" and 7mm. I cannot found clear answer on the web pages what springs should be ordered to CVO 110cid engine.

Any recommendations to SE 585 valve springs?
Valve lift is: .584"

Valve stem is 5/16 in the 110 heads.
I like the AV&V beehive spring on them but there are others that you can use.
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: 2015 cvo valve spring
« Reply #13 on: November 15, 2015, 10:34:00 AM »

I have similar problem with SE 585 cams. They recommended replace valve springs when installing these valves.

Do anybody knows what is valve stem diameter @ 2013 CVO 110cid engine?
Spring supplier like AV&V and Kibblewhite  has two stem diameters available: 5/16" and 7mm. I cannot found clear answer on the web pages what springs should be ordered to CVO 110cid engine.

Any recommendations to SE 585 valve springs?
Valve lift is: .584"
Run stock springs.
Logged

johnsachs

  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 747
Re: 2015 cvo valve spring
« Reply #14 on: November 15, 2015, 06:05:20 PM »

Logged
Pages: [1] 2  All
 

Page created in 0.173 seconds with 21 queries.