Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Aussie]

Walked into the bike room and smelt fuel, after checking all bikes I found my 08 Custom FatBoy quick disconnect was weaping, I have the larger o-ring size OD14mm x ID10mm x 2.0mm or I can use the HD 11273 case dowel o-ring.

Does anybody know the size of the smaller o-ring that sits right up inside the quick disconnect fitting.

Also need to confirm the o-ring size for the fuel line from tank to quick disconnect male end that holds the check valve and spring in place.

[rbaker]

https://shop.outpostalaska.com/bikemaster-bikemaster-fuel-o-rings-detail.htm?productId=18334294


https://shop.outpostalaska.com/OEMpartfinder.htm


These might help you find the O-rings size. good luck.


Richard

[dayne66]

When mine leaked I ended up taking it in to the dealer because I couldn't find a 'square shouldered' o-ring.