Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Cam Plate and Oil Pump recommenations  (Read 3043 times)

0 Members and 1 Guest are viewing this topic.

Dacuda

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 127

    • CVO1: 2013 Atomic Orange CVO Road Glide Custom 117
Cam Plate and Oil Pump recommenations
« on: March 13, 2018, 01:56:51 PM »

Looking for some feed back, I'm doing the 110 to 117 Upgrade and while doing it I want to change the Cam Plate and Oil Pump and lookin for recommendations SE, S&S or Fueling
Logged

mslcpa

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 96
Re: Cam Plate and Oil Pump recommenations
« Reply #1 on: March 13, 2018, 04:19:37 PM »

I recently had the cam chest on my 2010 FLHXSE overhauled with the Fueling Kit. Torrington inner cam bearings, fueling cam plate and high volume fuel pump, inner and outer cam chain tensioners, new chains, etc.. Had 60K miles on bike and getting a little more noise from the chest so just preventative maintenance. A bit surprised with the oil pressure. About 60lbs at start-up. 45lbs cruising 5th or 6th gear and about 12-15lbs at hot idle. Shop states is normal for that pump. Have put as couple thousand miles on since work done and no complaints. 
Logged

SneakyPete

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1608
  • AKA FGL
    • VA


    • CVO1: 2004 SEEG O/B- RIP
    • CVO2: 2009 SERG3 O/B
    • CVO3: 2014 SERK6 O/B
Re: Cam Plate and Oil Pump recommenations
« Reply #2 on: March 13, 2018, 06:49:52 PM »

S&S blue pump and cam plate
Logged
Member Hillbilly Rocket Riders MC, Virginia THE FASTEST CHAPTER!

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: Cam Plate and Oil Pump recommenations
« Reply #3 on: March 14, 2018, 12:31:42 AM »

The stock pump and plate work fine but if you want to upgrade I'd use the S&S.

DCFIREMANN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4812
Re: Cam Plate and Oil Pump recommenations
« Reply #4 on: March 15, 2018, 12:30:21 PM »

I have gone with fueling plate and pump on all of my TC engine builds. Never any problems.

Be Safe

THE DAWG
Logged
cvo 1  04 FLHTCSEI  Qrange/Black AKA Ole Punkin
cvo 2 05 VRSCXe Orange/Black sold
cvo 3 02 FXDWG2 Black/Gold 
cvo 4 04 FLHTCSE Blue/Black  sold
cvo 5 09 FLHTCUSE4 Red/Marron sold
cvo 6 12 FLHTCUSE Blue Saphire/Stardust Silver AKA Saphire
cvo 7 14 FLHTKSE  Blaze/Maroon
2020 CVO Limited

PROUD MEMBER EBCM #1.75 Second in command of this great organization

Also has been placed on
TRIPLE SECRET PROBATION

lowflight

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 341
    • AZ

    • CVO1: 2013 SERG
Re: Cam Plate and Oil Pump recommenations
« Reply #5 on: March 15, 2018, 02:52:09 PM »

I put SE in my wife's bike, plate and pump - works well with no problems. I just ordered S&S for mine, they have always made good products and after talking with some local builders they all have their favorites but more seemed to prefer S&S.
Logged

LMR

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 76
  • www.CVOHARLEY.com
    • CT

Re: Cam Plate and Oil Pump recommenations
« Reply #6 on: March 16, 2018, 09:56:41 PM »

Any particular reason everyone changes out their oil pump?
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: Cam Plate and Oil Pump recommenations
« Reply #7 on: March 17, 2018, 04:55:09 PM »

Because drag specialties gives incentives to dealers that move a lot of a certain aftermarket brand. ;)
Logged

DCFIREMANN

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4812
Re: Cam Plate and Oil Pump recommenations
« Reply #8 on: March 17, 2018, 06:50:17 PM »

Any particular reason everyone changes out their oil pump?

Yep there sure is. More volume and more pressure!!!!!

Be Safe

THE DAWG
Logged
cvo 1  04 FLHTCSEI  Qrange/Black AKA Ole Punkin
cvo 2 05 VRSCXe Orange/Black sold
cvo 3 02 FXDWG2 Black/Gold 
cvo 4 04 FLHTCSE Blue/Black  sold
cvo 5 09 FLHTCUSE4 Red/Marron sold
cvo 6 12 FLHTCUSE Blue Saphire/Stardust Silver AKA Saphire
cvo 7 14 FLHTKSE  Blaze/Maroon
2020 CVO Limited

PROUD MEMBER EBCM #1.75 Second in command of this great organization

Also has been placed on
TRIPLE SECRET PROBATION

SDCVO

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2917
  • 19 CVO RG-12 CVO RG
    • CA


    • CVO1: 2019 Mako Shark Roadglide
    • CVO2: 2012 Maple Roadglide
    • CVO3: 2019 BMW K1600 Grand America
Re: Cam Plate and Oil Pump recommenations
« Reply #9 on: March 17, 2018, 08:21:44 PM »

for whatever it is worth as I have posted my motor sumped and and they have put in a new motor with stage 4. Yesterday I was talking to the service mgr who told me that since HD's last oil pump they have not seen any bikes come back after installing. I do have a very good relationship with them and don't think he would tell me that if it weren't true but also this is just 1 medium sized dealer. My hopes are definitely up that it won't happen again. Have a appointment set up for March 31st for the tune and to put the TTS back on (obviously had to go back to HD tuner when bike sumped for warranty) which is a PIA and not cheap so if it is going to sump I hope it does it before then.
Logged
Alan
 

Page created in 0.139 seconds with 21 queries.