Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 2017 CVO Street Glide - engine failed under load  (Read 40 times)

0 Members and 1 Guest are viewing this topic.

lopezfr1

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
  • www.CVOHARLEY.com
    • FL

2017 CVO Street Glide - engine failed under load
« on: Today at 11:19:35 AM »

Hi All!

Need some advice. My M-E 114 engine failed under power. I was doing about 80 on the highway in 6th gear when there was a loud bang, then a lot of rattling and no power (sounded like a bunch of rocks banging around an oil drum). Towed it to the nearest HD dealer and as expected zero compression on one of the cylinders (rear).

They wanted my authorization for 4 hours of tear down time to determine the issue. I figure that $500 bucks is better spent on a new engine since I doubt this one is salvageable.

What do the rest of you think?

Thanks!
Logged

KGB

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1235
  • www.CVOHARLEY.com
    • OH


    • CVO1: 2016 FLHXSE Carbon Crystal with Phantom Flames
    • CVO2: 2019 FLHTKSE Magnetic Grey/Wineberry w Red Pepper
Re: 2017 CVO Street Glide - engine failed under load
« Reply #1 on: Today at 11:38:08 AM »

Possible broken valve spring, caused the valve to hit the piston which caused the loss of power, sounds like you need to authorize tear down instead of guessing


Sent from my iPhone using Tapatalk
Logged
2018 MITM Eureka Springs
2018 WV GTG
2018 Maggie Valley GTG
2019 MITM Eureka Springs
2019 Maggie Valley GTG
2020 Maggie Valley GTG
2021 WV GTG
2021 Maggie Valley GTG
2022 Ohio GTG
2023 1/2 Maggie Valley GTG

lopezfr1

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
  • www.CVOHARLEY.com
    • FL

Re: 2017 CVO Street Glide - engine failed under load
« Reply #2 on: Today at 11:57:19 AM »

Possible broken valve spring, caused the valve to hit the piston which caused the loss of power, sounds like you need to authorize tear down instead of guessing


Sent from my iPhone using Tapatalk

@KGB - based on other threads, even if it's just the valve spring and valve... would you have concerns about piston/cylinder damage and shrapnel floating around the rest of the engine?
Logged
 

Page created in 0.152 seconds with 21 queries.