www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: smkymtnboy on January 19, 2021, 01:09:12 PM
-
wanted to add yaffe bars to my street glide and my quote came to roughly $950.00. no labor included! :o my first thought was no way. is my thinking wrong.
-
The Yaffe 14" bars I put on my 17 CVO Street glide were right at 400 or so if memory serves me.
I think bars and installation was 1000, maybe 1100.
-
I bought my bars for about 400.00 I paid 150.00 for the labor on a cvo rg. I was told my guy gets about 50.00 more for a bat wing. Those are a little more work. Find an indy. Shouldn't be much more than that. Stuart.
-
Unfortunately, the Yaffe bars (and all of his products) on the higher end of the scale when it come to aftermarket improvements. I know several people who claim that trying to pull the wires through yaffe apes can be a real challenge. As the op said try to find and Indy or a friend and service manual....patience and a box of beer go along way.....🍺
-
Unfortunately, the Yaffe bars (and all of his products) on the higher end of the scale when it come to aftermarket improvements. I know several people who claim that trying to pull the wires through yaffe apes can be a real challenge. As the op said try to find and Indy or a friend and service manual....patience and a box of beer go along way.....🍺
i can install the bars. no problem there. my quote was 499.00 for 12 in bars. the installation wire cables banjo fittings etc came to 379.00 . then i think 80.00 my for the handle riser clamp. 20.00 for poly bushing. 35.00 for heat shrink. :o
-
That seems high just for bars. I think you can buy the bars prewired for 500. I have read a lot of bad stories of trying to wire the yaffe bars, my Indy also said they are a pain to wire but as long as you take your time it should be ok.
-
Yep I have a set on my 12 RG the inside of they are a pain to run wires Thur. I getting ready to change they out with KST. Yaffe bars are not that good of quality for the price. I pulled the KST off my 18 and replaced them with a set of Cordovas out of Calif.