www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin' Eagle® Road Glide® => Topic started by: lucy62 on January 11, 2022, 12:16:58 PM

Title: 12" ape hangers on 09 cvo roadglide
Post by: lucy62 on January 11, 2022, 12:16:58 PM

Looking to install 12" miter cut Dominator bars on my '09 CVO Roadglide.  Anyone know if the stock clutch, brake and wiring can be used or if longer are required.

Title: Re: 12" ape hangers on 09 cvo roadglide
Post by: Dan_Lockwood on January 11, 2022, 05:17:22 PM

I did 10" on mine and the clutch hose was too short.  I cheated and drilled a hole in the main tube and ran it through the frame and out the other side.  De-burred it well and added rubber gromets and all has been great for around 5 years now.

I don't remember having to do anything special with the wiring though.

Good luck!