www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Road Glide Ultra® => Topic started by: 11seshark on July 03, 2011, 11:39:50 PM
-
I wanted to make sure this function was turned on on my bike. I followed the instructions in the owners manual but after turning the ignition switch on and making sure the off/run switch was in the run position. The cruise indicator lamp never flashes green, red or any other color. :confused5: anyone have a suggestion on what to try next?
Thanks
Bill
-
Are you missing the throttle step?
Here are the 4 steps to enable it:
1. Turn ignition switch to ON position & push eng. OFF/RUN switch to RUN (do not start motorcycle)
2. Push the throttle to roll-off position & hold. (in other words forward)
3. After about 3 seconds, the cruise light will either flash green (this means it is enabled) or red (which means disabled)
4. Repeat procedure as needed to enable or disable system.
-
I forgot to mention that step but I did turn the throttle forward and waited but nothing happened.
Thanks
Bill
-
This is not for your year... but you may need the dealer to activate it...
http://www.cvoharley.com/yabb2/Attachments/M-1191.pdf
-
You have to turn the cruise control off before you can use the light I think.
-
Roll the throttle all the way forward (WFO)
-
I think the TTS tuner alternates between cylinders that it shuts the fuel off to....if your tuner guy sets it up that way.