Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Convert FXDWG3 to mid controls?  (Read 4483 times)

0 Members and 1 Guest are viewing this topic.

jmillington

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
  • www.CVOHARLEY.com
    • CA

Convert FXDWG3 to mid controls?
« on: September 26, 2017, 09:48:36 PM »

Hi, I'm a new guy and am looking to buy a 2002 FXDWG3 that is at our local shop.
I've been a sport bike rider for many years, but people change. :)

How hard is it to convert the FSDWG3 to mid controls?  (I hope this isn't heresy!)
The problem is my back - I have problems at L5 - and I actually have a few questions;

1. Will I get used to the forward controls and ending up liking them more than I think?

2. Does riding with forward controls necessarily mean that your back won't like it?

3. Would you recommend converting it in my case; i.e. to relieve potential back pain?

4. Any other 2 cents you might want to throw in!

Thanks!
Jim M
Logged

J.D.

  • Guest
Re: Convert FXDWG3 to mid controls?
« Reply #1 on: September 26, 2017, 09:51:53 PM »

#1
Logged

Buy early

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8679
  • My future if I were Benjamin Button

    • CVO1: 2001 FXDWG2 Switchblade - The Beast
    • CVO2: 2004 FXSTDSE2 Deuce - Beauty
Re: Convert FXDWG3 to mid controls?
« Reply #2 on: September 26, 2017, 09:53:28 PM »

How tall are you? What do you ride now?
Logged

jmillington

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
  • www.CVOHARLEY.com
    • CA

Re: Convert FXDWG3 to mid controls?
« Reply #3 on: September 26, 2017, 10:00:16 PM »

How tall are you? What do you ride now?

I'm 5'9", 165 lbs, 31" inseam (not a big guy). 
I currently ride a 2015 Kawasaki Ninja 1000 (not the ZRX, but the more street oriented "gentleman's sport bike"), which I'll be keeping.

I test rode the FXDWG3 and I was able to reach the controls OK.
The bike seemed to just glide (pun intended, but appropriate) down the road, very smooooth; quite a nice ride!
« Last Edit: September 26, 2017, 10:03:33 PM by jmillington »
Logged

J.D.

  • Guest
Re: Convert FXDWG3 to mid controls?
« Reply #4 on: September 26, 2017, 10:08:28 PM »

Those Fox shocks on these bikes are very good, IMHO.
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Convert FXDWG3 to mid controls?
« Reply #5 on: September 26, 2017, 10:57:21 PM »

Do you anticipate the bike being used primarily around town / local riding or instead regularly knocking down three or four (or more) tank full days?  You'll get used to either position but your duration in the saddle might suggest one versus the other.
Logged

Buy early

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8679
  • My future if I were Benjamin Button

    • CVO1: 2001 FXDWG2 Switchblade - The Beast
    • CVO2: 2004 FXSTDSE2 Deuce - Beauty
Re: Convert FXDWG3 to mid controls?
« Reply #6 on: September 26, 2017, 11:08:17 PM »

If comfort is the goal, I would suggest attacking the seat first. I’ve done several 500+ mile days on the stock seat and if you plan to do the same, a decent seat will be of great value. I got a Corbin Dual Tour. https://www.cvoharley.com/smf/index.php?topic=27725.420

The Corbin also moves you forward a few inches so the forward controls aren’t such a stretch.
Logged

jmillington

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
  • www.CVOHARLEY.com
    • CA

Re: Convert FXDWG3 to mid controls?
« Reply #7 on: September 27, 2017, 12:09:42 AM »

If comfort is the goal, I would suggest attacking the seat first. I’ve done several 500+ mile days on the stock seat and if you plan to do the same, a decent seat will be of great value. I got a Corbin Dual Tour. https://www.cvoharley.com/smf/index.php?topic=27725.420

The Corbin also moves you forward a few inches so the forward controls aren’t such a stretch.

Thanks for the tip!  The Corbin Dual Tour looks like a good bet.
Logged

jmillington

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
  • www.CVOHARLEY.com
    • CA

Re: Convert FXDWG3 to mid controls?
« Reply #8 on: September 27, 2017, 12:21:22 AM »

Do you anticipate the bike being used primarily around town / local riding or instead regularly knocking down three or four (or more) tank full days?  You'll get used to either position but your duration in the saddle might suggest one versus the other.

I anticipate using it primarily for local day trips up into the northern California Sierra foothills and round trip to the Lake Tahoe area.

I'm also thinking of just mounting mid foot pegs on it (not full controls), to give riding a try in both positions before making any drastic decisions.
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Convert FXDWG3 to mid controls?
« Reply #9 on: September 27, 2017, 07:25:08 PM »

I anticipate using it primarily for local day trips up into the northern California Sierra foothills and round trip to the Lake Tahoe area.

I'm also thinking of just mounting mid foot pegs on it (not full controls), to give riding a try in both positions before making any drastic decisions.

The latter is a really good idea.  Mark nailed the obvious though when he mentioned the saddle previously.  IF you are considering a saddle change do that before you do anything else.  Windshield change, handlebar changes and foot control changes all should come after a saddle change because they are all relative to where you plant your butt on the bike.
Logged

Landshark

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 554
    • CA


    • CVO1: 2006 FLSTF-SE
    • CVO2: 2009 FXDF-SE
    • CVO3: 2006 FLHTCU-SE
Re: Convert FXDWG3 to mid controls?
« Reply #10 on: September 29, 2017, 10:07:27 PM »

I converted my CVO Fatbob to Mid-controls and have never looked back. I am 6’2” and it’s the best modification I did.  You can check out my my post in the Fatbob threads under transformation. Good luck.
Logged

BostonboyDH

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 522

    • CVO1: FLTRSE3
Re: Convert FXDWG3 to mid controls?
« Reply #11 on: September 30, 2017, 01:04:01 PM »


  2015 standard Fatbob contemplated the mid control swap but did the reduced reach forward control kit, worked out well for my 29-30 inch inseam. Stock seat & MoCo pullback risers worked out well for me.  Mid controls a little more costly but not off the table yet!!

    BostonBoy
Logged
 

Page created in 0.142 seconds with 21 queries.