Topic: Got me some trim... (Read 10157 times)

89Speedy · « **on:** February 22, 2013, 02:26:41 PM »

Added the decorative trim on the heavy breather ... Not really a mod but I think it adds a nice little detail. I was surprised how heavy the piece was....all for under $29

ultrarider123 · « **Reply #1 on:** February 22, 2013, 02:33:29 PM »

Hey, that really looks good. Sometimes the smallest changes make the most difference....

Dave H · « **Reply #2 on:** February 22, 2013, 03:58:06 PM »

Looks good Speedy -

I agree with Haird - It's the little things that can make a big difference .

Z06_Pilot · « **Reply #3 on:** February 23, 2013, 12:04:15 AM »

I actually ordered that from Surdyke just a couple of days ago!

Charlie · « **Reply #4 on:** February 23, 2013, 12:35:06 AM »

Looks Great,
It is indeed all about detail!
What else are you thinking of doing?

89Speedy · « **Reply #5 on:** February 23, 2013, 05:21:22 AM »

Quote from: Charlie on February 23, 2013, 12:35:06 AM

Looks Great,
It is indeed all about detail!
What else are you thinking of doing?

Just a few more things . . . daymaker headlight, replace silly reflector with LED strip, replace tail lights with LED, add side mount license plate that attaches to axle so I'll have room to add a swing arm bag, add chrome screws all the way around, replace oil dipstick with oil level and temperature dipstick with lighted LCD readout, add 12V auxiliary port. dyno tune . . . that's all for now.

Charlie · « **Reply #6 on:** February 23, 2013, 07:23:07 AM »

Quote from: 89Speedy on February 23, 2013, 05:21:22 AM

Just a few more things . . . daymaker headlight, replace silly reflector with LED strip, replace tail lights with LED, add side mount license plate that attaches to axle so I'll have room to add a swing arm bag, add chrome screws all the way around, replace oil dipstick with oil level and temperature dipstick with lighted LCD readout, add 12V auxiliary port. dyno tune . . . that's all for now.

Hi,
I did the Daymaker Headlight (Awsome) i went for black as you can see on my photo, think it looks pretty cool!
Removed the silly reflectors (I hate them, as do most)
Didn't bother with the dipstick, i have had 3 out of 5 of my pals that did and they stopped working! try Marlins for a better gauge!
Done a lot more also since the photo was taken and its all now starting to come together!
Enjoy your ride, looks great already but as you know, always room for personnel improvements!

2k · « **Reply #7 on:** February 23, 2013, 08:26:17 AM »

From your title I couldn't wait to get to the thread, and you were talking bout scooters (drop the 's' is what I was thinking)

Now that I'm grounded.....how does it attach?

Buy early · « **Reply #8 on:** February 23, 2013, 08:36:57 AM »

Quote from: Charlie on February 23, 2013, 07:23:07 AM

Hi,
I did the Daymaker Headlight (Awsome) i went for black as you can see on my photo, think it looks pretty cool!
Removed the silly reflectors (I hate them, as do most)
Didn't bother with the dipstick, i have had 3 out of 5 of my pals that did and they stopped working! try Marlins for a better gauge!
Done a lot more also since the photo was taken and its all now starting to come together!
Enjoy your ride, looks great already but as you know, always room for personnel improvements!

+1 on nixing the LCD dipstick. Been thru 2 myself. Poorly made. Seem to fail in the 366th day. Good idea poorly executed. Went back to stock.

Z06_Pilot · « **Reply #9 on:** February 24, 2013, 01:18:37 AM »

Quote from: 2ksoftail on February 23, 2013, 08:26:17 AM

From your title I couldn't wait to get to the thread, and you were talking bout scooters (drop the 's' is what I was thinking)

Now that I'm grounded.....how does it attach?

2ksoftail. I can't get past your avatar to read the thread.... 2 thumbs up my friend !!

89Speedy · « **Reply #10 on:** February 24, 2013, 04:43:18 AM »

Quote from: Z06_Pilot on February 24, 2013, 01:18:37 AM

2ksoftail. I can't get past your avatar to read the thread.... 2 thumbs up my friend !!

It's like they're trying to Breakout!!!!

89Speedy · « **Reply #11 on:** February 24, 2013, 04:51:02 AM »

Quote from: Charlie on February 23, 2013, 07:23:07 AM

Hi,
I did the Daymaker Headlight (Awsome) i went for black as you can see on my photo, think it looks pretty cool!
Removed the silly reflectors (I hate them, as do most)
Didn't bother with the dipstick, i have had 3 out of 5 of my pals that did and they stopped working! try Marlins for a better gauge!
Done a lot more also since the photo was taken and its all now starting to come together!
Enjoy your ride, looks great already but as you know, always room for personnel improvements!

Thanks for the tip on the oil dipstick gauge. Guess I'll pass. I wasn't aware the daymaker came in black. Might be perfect with my black and silver.

Z06_Pilot · « **Reply #12 on:** February 24, 2013, 11:52:35 AM »

Quote from: 89Speedy on February 24, 2013, 04:51:02 AM

Thanks for the tip on the oil dipstick gauge. Guess I'll pass. I wasn't aware the daymaker came in black. Might be perfect with my black and silver.

I agree the digital readout oil dipstick is crap. HD replaced 4 of them within a year I had on my FXSTC. I then just gave up and put the OEM cap back on....

clubhes · « **Reply #13 on:** February 25, 2013, 01:48:03 AM »

Quote from: Z06_Pilot on February 24, 2013, 01:18:37 AM

2ksoftail. I can't get past your avatar to read the thread.... 2 thumbs up my friend !!

3

had the same issue!...Wow

clubhes · « **Reply #14 on:** February 25, 2013, 01:49:00 AM »

Looks great!

Charlie · « **Reply #15 on:** February 25, 2013, 06:59:17 AM »

Quote from: clubhes on February 25, 2013, 01:48:03 AM

3 had the same issue!...Wow

Something else made in China! when are they going to learn?

Big-Aye · « **Reply #16 on:** September 25, 2013, 06:54:59 AM »

Quote from: 89Speedy on February 22, 2013, 02:26:41 PM

Added the decorative trim on the heavy breather ... Not really a mod but I think it adds a nice little detail. I was surprised how heavy the piece was....all for under $29

Here's my version...

Riggerking · « **Reply #17 on:** September 28, 2013, 09:28:40 AM »

Quote from: Big-Aye on September 25, 2013, 06:54:59 AM

Here's my version...

What is the part # on this one?

RedMoon · « **Reply #18 on:** September 28, 2013, 09:44:29 AM »

Quote from: Riggerking on September 28, 2013, 09:28:40 AM

What is the part # on this one?

Screamin' Eagle Heavy Breather Decorative Medallion-29017-09
www.harley-davidson.com/store/se-heavy-breather-decorative-medallion

se-deuce · « **Reply #19 on:** September 30, 2013, 01:41:31 PM »

What is the part number on the s-e 110 medallion?

RedMoon · « **Reply #20 on:** September 30, 2013, 06:40:36 PM »

Quote from: se-deuce on September 30, 2013, 01:41:31 PM

What is the part number on the s-e 110 medallion?

It is the same one ... Screamin' Eagle Heavy Breather Decorative Medallion-29017-09
www.harley-davidson.com/store/se-heavy-breather-decorative-medallion

ChopperPilot · « **Reply #21 on:** October 01, 2013, 05:07:24 PM »

Looks like a good detail to add to the bike, it is now on the list!

lowflight · « **Reply #22 on:** October 01, 2013, 09:20:44 PM »

Like em both!
Big -Aye your avatar made me say a few things out loud!

ChopperPilot · « **Reply #23 on:** October 03, 2013, 09:54:49 PM »

Just ordered this trim piece from Surdyke as well as chrome bolts for transmission, cam cover and switch housing. Thought I might throw in a few other items while I was placing an order.

Dobeman2000 · « **Reply #24 on:** October 04, 2013, 10:00:45 AM »

Use that 20% off with free shipping they were offering on everything yesterday?- I picked up a few things myself- 20% off with free shipping can add up to quite a discount (and quite a bill at the same time).

Quote from: ChopperPilot on October 03, 2013, 09:54:49 PM

Just ordered this trim piece from Surdyke as well as chrome bolts for transmission, cam cover and switch housing. Thought I might throw in a few other items while I was placing an order.

se-deuce · « **Reply #25 on:** October 07, 2013, 12:06:17 PM »

Got mine.

gaturg · « **Reply #26 on:** October 19, 2013, 12:53:53 PM »

Here is mine that I just put on.

psdj52 · « **Reply #27 on:** October 19, 2013, 11:43:17 PM »

What part # is the one with the Screaming Eagle and the 110 with the Willie G Skull in the background? can not seem to find that one.

se-deuce · « **Reply #28 on:** October 20, 2013, 08:41:51 AM »

29276-09 & 29277-09

gaturg · « **Reply #29 on:** October 20, 2013, 11:24:57 AM »

The p/n on mine is 29017-09, I had a guy from acculaser put the 110 in with the Willie G skull.

Allen

se-deuce · « **Reply #30 on:** October 20, 2013, 12:51:06 PM »

Ooops, missed the skull part...

CUZCO · « **Reply #31 on:** October 23, 2013, 09:29:21 AM »

Skull looks great on it.

gaturg · « **Reply #32 on:** October 25, 2013, 09:58:50 AM »

Thanks, appreciate it. Didn't know how it would turn out but I think it came out pretty good.

gaturg · « **Reply #33 on:** February 26, 2014, 10:01:43 AM »

Had acculaser put my initials in the inserters and the 110 with the willie g skull. He got the skull off center but the pipes will cover it up though. Just waiting for warmer weather to get the other stuff on the bike.

Stay warm All

Allen

ChopperPilot · « **Reply #34 on:** February 26, 2014, 07:39:18 PM »

Quote from: gaturg on February 26, 2014, 10:01:43 AM

Had acculaser put my initials in the inserters and the 110 with the willie g skull. He got the skull off center but the pipes will cover it up though. Just waiting for warmer weather to get the other stuff on the bike.

Stay warm All

Allen

Great idea, thanks for posting.

gaturg · « **Reply #35 on:** February 26, 2014, 08:45:58 PM »

Not a problem, thought it could give others ideas. Going to have them do something for my grandfather, father and my time in military.

14_CVOBO · « **Reply #36 on:** February 27, 2014, 10:50:21 AM »

Nice! I may have to look into getting one...

gaturg · « **Reply #37 on:** March 25, 2014, 03:50:42 PM »

Has this done today.

Author Topic: Got me some trim... (Read 10157 times)

ultrarider123