Recent Posts

Ok guys just looking for some opinions from maybee some builders on here , heres the story

I have a 2006 se 103 ultra i built a 107 with dome pistons from zippers did the whole 9 yards pump plate cams ect except the crank (stock) and after 700 miles it developed a massive piston knock the skirt was smacking the bottom of the cylinder on up stroke. So i had the stock crank rebuilt trued and welded , rebuilt the motor again now at 1400 miles same problem theres a sticky spot in the crank again. So my question here is am i missing something? Is something causing this orr was it just a bad crank rebuild , the first crank had 60k miles on it so i chalked it up as wear . I was using a thunder max to tune no sign of excessive detonation on plugs or piston tops 🤷‍♂️🤷‍♂️🤷‍♂️

1 CVO Technical / Twin Cam / Re: 2 failed 107 builds on: Today at 11:54:32 AM
Started by BarrySEUltra-103 - Last post by BarrySEUltra-103
More pictures

2 CVO Technical / Twin Cam / 2 failed 107 builds on: Yesterday at 06:09:10 PM
Started by BarrySEUltra-103 - Last post by BarrySEUltra-103
Ok guys just looking for some opinions from maybee some builders on here , heres the story I have a 2006 se 103 ultra i built a 107 with dome pistons from zippers did the whole 9 yards pump plate cams ect except the crank (stock) and after 700 miles it developed a massive piston knock the skirt was smacking the bottom of the cylinder on up stroke. So i had the stock crank rebuilt trued and welded , rebuilt the motor again now at 1400 miles same problem theres a sticky spot in the crank again. So my question here is am i missing something? Is something causing this orr was it just a bad crank rebuild , the first crank had 60k miles on it so i chalked it up as wear . I was using a thunder max to tune no sign of excessive detonation on plugs or piston tops 🤷‍♂️🤷‍♂️🤷‍♂️

3 CVO Technical / General CVO discussion / MOVED: Windshield Size on: Yesterday at 12:04:45 PM
Started by Fired00d - Last post by Fired00d
This topic has been moved to CVO™ Street Glide®. https://www.cvoharley.com/smf/index.php?topic=126264.0

4 CVO Social / New Member Introduction / Re: Greetings from Marietta, Georgia on: Yesterday at 05:42:55 AM
Started by Southbound - Last post by imoo6170
Good luck in your endeavours. Welcome from Sydney Australia

5 CVO Social / New Member Introduction / Re: newbie on: Yesterday at 05:41:45 AM
Started by kpgny - Last post by imoo6170
Welcome from Sydney Australia

6 CVO Social / New Member Introduction / Re: New Member from Western Canada on: Yesterday at 05:41:20 AM
Started by Tabbernor75 - Last post by imoo6170
Welcome from Sydney Australia

7 CVO Social / New Member Introduction / Re: We still CVO on: Yesterday at 05:40:46 AM
Started by jameyryan79@gmail.com - Last post by imoo6170
Great colour scheme. Welcome from Sydney Australia

8 Custom Vehicle Discussions / CVO™ Street Glide® / Windshield Size on: Yesterday at 12:14:27 AM
Started by JONNIEROCK - Last post by JONNIEROCK
Does anyone know what they consider the height of a stock windshield to be on a 2024 CVO Street Glide in inches? Thanks In Advance

9 CVO Social / New Member Introduction / Re: Greetings from Marietta, Georgia on: July 11, 2025, 05:18:41 PM
Started by Southbound - Last post by BigLock
Welcome from the Tar Heel state!!!

10 CVO Social / New Member Introduction / Re: Greetings from Marietta, Georgia on: July 11, 2025, 03:04:28 PM
Started by Southbound - Last post by mjb765
Welcome from Delaware!!