Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[skreminegul07]

I had the speed sensor go.  Had to pull the tank so I'm going to stainless braided lines.  I  already changed the bars and changed the routing of the throdttle /idle cables.  Where are they supposed to go?  I believe they stay behind the risers,  By the way, anyone know the stock length?  30, 32?  Barnett says 32, it seems HD says just under 30.

[takanohana]

FXR4 OEM is 28.5" both cables.

[skreminegul07]

FXR4 OEM is 28.5" both cables.

I've seen others post the same.  OEM black 56342-96 56343-96.  

When I look it up with Barnett, it shows as 32", Motion Pro shows the same OEM part numbers ass 30"

I tried measuring them with the tank off and it seemed like 30"

Anyone have part numbers for braided cables, stock length?

[fxr4mikey]

I've seen others post the same.  OEM black 56342-96 56343-96.  

When I look it up with Barnett, it shows as 32", Motion Pro shows the same OEM part numbers ass 30"

I tried measuring them with the tank off and it seemed like 30"

Anyone have part numbers for braided cables, stock length?

if you know the stock length, couldn't you get the braided part number by looking it up at some site that sells, say, Goodridge ??  in the part number you'll find the length ..... I think

Like on my bike, I put on SS clear coat Goodridge

the part numbers are:

Clutch: 617-95sc+8
Idle: 342-96sc+8
throttle: 343-96sc+8

that +8 (I believe) is the length above stock .... so each of those cables are 8 inches longer than stock

Hope that's some help