1
on: Today at 11:08:19 AM
|
||
Started by Tabbernor75 - Last post by GKroadking | ||
Welcome from Munich, Germany
|
2
on: Today at 04:58:01 AM
|
||
Started by Southbound - Last post by GKroadking | ||
Welcome from Munich Germany. Good luck with your project.
|
3
on: Yesterday at 04:01:19 PM
|
||
Started by johnmowcop - Last post by johnmowcop | ||
I have just ordered the kit to fit the primary chain case breather. How do I remove the left side plastic heat shield. Is there anything else to remove or connect to give sufficient access.
Any advice much appreciated. Regards JohnT |
4
on: Yesterday at 08:47:39 AM
|
||
Started by schok - Last post by schok | ||
GOOD CALL JOEL !!!
I tested the Crank Position Sensor and it had no reading, so I swapped it out and SUCCESS! Now I know that a 2009 will continue running without the sensor working, which I never would has suspected. Thanks again for your input. Schok |
5
on: Yesterday at 03:44:16 AM
|
||
Started by Southbound - Last post by bisounours | ||
Hello,
![]() ![]() I send you the ![]() Best Regards ![]() |
6
on: June 29, 2025, 11:51:36 PM
|
||
Started by ashirley - Last post by HD Street Performance | ||
Another at least 1.5 points of compression will help a lot all throughout the rpm range. Then head porting work, assuming it is done correctly, will add an additional 7-10hp assuming new larger valves are installed. This build will require a custom flash tune by a qualified dyno facility.
|
7
on: June 29, 2025, 05:34:44 PM
|
||
Started by jameyryan79@gmail.com - Last post by ultrafxr | ||
Jamey and Candy, so good to see you here again. Saw Candy's trike on FB but hadn't seen your new CVO Jamey. Friend of mine just took delivery of the same bike last week. Lots to learn and master. Enjoy.
Jerry |
8
on: June 29, 2025, 04:14:57 PM
|
||
Started by drgmis16 - Last post by r0de_runr | ||
My HD Branded Sena 30k works for about 8 hrs or longer if I plug it in to a battery bank during meal stops for half hour or so. Works longer in a day than I care to ride.
|
9
on: June 29, 2025, 04:12:39 PM
|
||
Started by drgmis16 - Last post by r0de_runr | ||
Your 2016 will need the WHIM to connect to any wireless headset, and if headset is not Harley branded it will be mono.
But just about any wireless headset or earbuds will work with your phone alone, no bike interconnection without WHIM. |
10
on: June 29, 2025, 01:33:55 PM
|
||
Started by drgmis16 - Last post by drgmis16 | ||
![]() |