www.CVOHARLEY.com
CVO Technical => Twin Cam => Topic started by: TRS300 on July 09, 2020, 06:47:38 PM
-
I need some help as I'm getting confused... I'm buying parts for a repair after a lifter failed. The bike had 64K miles on the OEM Lifters. I should have paid more attention to this issue.
Anyway, after much reading here I decided to get the Hylift B2313SE Slow Leak USA DIRECT SHOT but the seller indicates that they will not fit my 2015 CVO? It even says this in the title.
Is the B2313SE the right part number for my 2015?
Title: Harley 1999-13 Twin Cam Lifter Set Hylift B2313SE Slow Leak USA DIRECT SHOT EDM
<<<<<<<<<<>>>>>>>>>>
Even Larry's site lists two different Part Numbers? *See attachment
-
Same lifter only the SEL has travel limiter installed.
-
Same lifter only the SEL has travel limiter installed.
Whenever I find this lifter and check it against my 2015 CVO it says it's not compatible? So I guess this is wrong info?
Never mind. I just pulled the trigger and bought a set from Larry.s MS
-
That is what I did. here is info from a previous post. I dont know how to link it.
"Assuming you want the ones with roller pin oiling (I would), the Hylift part number is 2313SE and they run $139 per set from Don (HD Street Performance). Once again, you don't need the travel limiter version which is part number 2313SEL. "
-
Don's lifters and Larry's lifters are different lifters
travel limiters are little used and little understood but provide great benefits with adjustable pushrods