Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[20 gauge]

Can these bars be installed on an 09 SERG without lengthening the appropriate cables and wires? Thanks

[hd-dude]

The 575's are meant for the Electra Glide (they are much wider at the base). I would recommend the 515''s (10." apes) They are similiar to the 575's in height and pullback and work well on the RG's. Stock cables will work with minor re-routing.

[johnnymap]

Jim,

Will the 515's also work on a 2000 FLTR?

Thanks,

john

[hd-dude]

Jim,

Will the 515's also work on a 2000 FLTR?

Thanks,

john

Yes, but you will most likely need all new cables (clutch, brake, throttle, & idle)

[Twolanerider]

Jim,

Will the 515's also work on a 2000 FLTR?

Thanks,

john

John, the 515s are what I put on my 2000.  Clutch cable worked with a little rerouting.  Throttle and idle cables worked; but with zero length to spare.  Brake line had to be replaced.  

Later replaced them all to ease the alignment and because I was dissatisfied with the appearance of how they ran.  But the clutch and throttle/idle cables did work as they were for 5000 miles or so.

This was with the bars pulled down a bit, closer to me to increase the pullback.  Had I left them more vertical (more ape-like) I'm sure the throttle and idle cables wouldn't have worked and the clutch cable would've been tight.