Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[e4seter]

Had my Jester scheduled in this AM for the "Torque Curve Calibration". They ran my vin and said yep it needs it. Took it back into the shop and couldn't do it. The software for the CVO bikes has not been released yet. SM doesn't have a clue as to when it will be released.

 

[Woop De Doo]

Thanks e4seter for the info. Hope to have my Rinehards, SERT and new A/C on by then and won't need the update.

   Don S

[skreminegul07]

Ditto on that update.  Had the bike at the dealer today and asked about the update.  Same answer, no S/W available.   [smiley=nixweiss.gif]

[Fired00d]

Ditto on that update.  Had the bike at the dealer today and asked about the update.  Same answer, no S/W available.   [smiley=nixweiss.gif]

Can anybody say, "Putting the cart before the horse". Hopefully this will not be a safety issue because if it is seems like they (MoCo) just set themselves up for some big time lawsuits.

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

[WVULTRA]

Can anybody say, "Putting the cart before the horse".
Ride Safe,
Fired00d
 [smiley=fireman.gif]

Sure is strange the notice states:

We strongly urge you to take your motorcycle to your dealer to have the appropriate service performed as soon as possible. Should you choose to ride your motorcycle prior to this service, we urge you to be aware of this condition.

And then the Bulletin states:

*** Use DT software version 20.xx or greater. Version 20.xx, targeted for release mid to late December 2006, will provide

[ima29]

My 07 Jester was also hit by recall. Dealer came and trailered bike back to shop then called and informed of no software. I told them to keep it till it is resolved, hell, can't ride smurfette anyway due to broken collar bone. They offered to keep it polished and put on accumulated parts purchased for free as salt air and humidity is death to chrome here. So far these guys are treating me right [smiley=huepfenjump3.gif]
Kelly

[GasRat]

Just picked mine up from the dealer this afternoon. I had them put the stage 1 air cleaner on it since they had it in to replace the saddlebag lid that had a run in it & they did the new download for it while it was there. What flash it was I have no idea, whether it was the one for the new air cleaner or the reacall flash I'm not sure but they didn't charge me for it which is cool because I would have had to pay for the air cleaner download otherwise. One of the techs told me that they were basicly the same download, but I find that hard to believe. All I know is it seems to be a little snappier at low speeds than it was and runs great so far. But only a little more time will tell.

[WVULTRA]

Had my Jester scheduled in this AM for the "Torque Curve Calibration". They ran my vin and said yep it needs it. Took it back into the shop and couldn't do it. The software for the CVO bikes has not been released yet. SM doesn't have a clue as to when it will be released.

Don S

Some additional info:

Service Bulletin M-1186 Information
1. Please read the entire bulletin.
2. Table #1 is the OEM calibration

[Cerdo]

  Thanks for the info, dealer said to drop it off anytime the weather permits. Will keep you posted.

[Woop De Doo]

Received my notice in the mail today. Again suggesting that I get it done at my earliest convienance. I will talk to the sm at the dealer in the morn. Earlier he had told me that he had another release but he couldn't use it until the 6th of Dec.

    Don S

[doubledeuce3]

does this apply just to the 2007 models , or do the 2006 models have this problem too?

[WVULTRA]

does this apply just to the 2007 models , or do the 2006 models have this problem too?

double:
Think this particular campaign is for '07s only.

[HawgDoc]

Not sure if this applies to the CVO bikes, but doing a VIN Service Check at the H-D site yielded this for me today:

ATTENTION:

There are one or more open safety recalls [size=16]or[/size][/b] product improvement campaigns on your vehicle. The following list contains the [size=14]campaign[/size] number and a brief description:

0903:   TORQUE SMOOTHING CALIBRATION

Just wondering if you know the difference between a recall and a product campaign... because the thread title is '2007 recall'...

[HawgDoc]

The smooth torque performance calibrations were released a few days early... all dealers should have them available within a few days.  [smiley=orange.gif]

[WVULTRA]

Not sure if this applies to the CVO bikes, but doing a VIN Service Check at the H-D site yielded this for me today:

ATTENTION:

There are one or more open safety recalls [size=16]or[/size][/b] product improvement campaigns on your vehicle. The following list contains the [size=14]campaign[/size] number and a brief description:

0903: