Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dave29]

Installed mine about two weeks ago. Bike seems to start easier, was smoother and cooled faster when I shut it down. Install took me about 40 minutes due to poor lighting. I also ran a ground on the front. Was easy because there is a cable hold down bracket attached to the front down tubes. Just made up the ground and plugged it into the xied ground lead.
If I had to do it again would probably take me 15 minutes.
Would like to see xied include a front ground ring terminal with the kit in case you wanted to run a front and rear grounddave29

[HDDOCFL]

Are any of you using the xi eds along with the full sac baffles or other slip ons? Just wondering about decell popping?  The reason I asked was that I have used them in the past and got the dreaded decell pop. Thanks Doc

[dartman]

Are any of you using the xi eds along with the full sac baffles or other slip ons? Just wondering about decell popping?  The reason I asked was that I have used them in the past and got the dreaded decell pop. Thanks Doc

Doc, I use the 1.75 full sac baffles and do not get any decell popping,  I do not use the engine for brakeing below third gear either so perhaps thats not a true test.

[dave29]

+1...i'm running Fulsac 1.75 also. Haven't noticed the pop however I really wasn't listening for it.

[Jerry/MD]

Im sure he will get them to you fast, whistle on the effect they have on your 09, they worked very well on my near stock 07 SEUC, They aren't designed for hi output machines or pegging the rev limiter, but in my case, I probably run in closed loop 99.5 percent of the time im riding so they suited me very well.

This is the mod I'm looking for.  Something simple to address heat. Thanks dartman for the message and info.

[georgw221]

Will these help a 09 Street Glide ALL STOCK?

[rogerkmac]

The short answer is yes.  All late model stock HD's whether they are standard or CVO run lean.  This is an inexpensive solution to improve this lean condition.

[WestCoastRuss]

Has anyone tried this on a '10 CVO yet?

[dartman]

Has anyone tried this on a '10 CVO yet?

WCR, I read a thread several days ago that the Adapter cables for the 2010 fl-xieds were in their final stages of production apparently not available for the 10,s just yet.

[Wheelsnkeels]

WCR, I read a thread several days ago that the Adapter cables for the 2010 fl-xieds were in their final stages of production apparently not available for the 10,s just yet.

The hold up is Steve has not received the connectors yet. Waiting on the manufacturer to deliver them.

[georgw221]

Has anyone ever ran a dyno before and after they installed the  X-ieds,,, To see what power gains you get and also AFR ??

[dartman]

The hold up is Steve has not received the connectors yet. Waiting on the manufacturer to deliver them.
[/quote

They are on the web site, as Available

[WestCoastRuss]

   They did say January!!