Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[HDDOCFL]

Jim!  Whats up? How do you like the CR 575 no that its all finished up.  Thanks Doc

[happyman]

09 CVO SERG


I installed the Cycle Rama 575 cams with FS 1.75" baffles with no cat, and we used the TTS software. Numbers came out power 101.1 and 115.6 torque. It definitely woke the motor up and cooled it down. No more motor noise also at lower RPM, its amazing.



Cycle Rama 575 cams

Intake   Open  15        Close  35      .575 lift   230 duration  100LC   22 degree overlap   105.5 LSA
Ex.      Open   49       Close  7         .560 lift  236 duration   111LC



Blue is stock. 86.9 - 107.3

Red is Cycle Rama 575 cams, Fullsac 1.75 baffles, cat less pipe using Master Tuner. 101.1 - 115.6

Green, we removed the Fullsac's baffles and installed SuperTrapp FatShot Slip-0n's. 103.9 -118.1

could you tell me what end cap  and how many discs you run with the  fatshots? thanks

[HDDOCFL]

I know he had a closed end cap the last time I seen him about 2 months ago.  Doc

[happyman]

I know he had a closed end cap the last time I seen him about 2 months ago.  Doc

 am curious what he rubn for end caps for sure

[jimp]

am curious what he rubn for end caps for sure

I have the closed end caps like Doc said, with the full set of disc's.

[happyman]

I have the closed end caps like Doc said, with the full set of disc's.

so the number  of discs is 10 per side with closed end cap if i am reading this correct???
thanks

[jimp]

so the number  of discs is 10 per side with closed end cap if i am reading this correct???
thanks

I will double check the number of disc.

[txhawg]

I will double check the number of disc.

I am very interested in the number of discs as well.  This is good stuff!  You've got yourself a fun looking ride there. 

[jimp]

I count Sixteen.

[HDDOCFL]

Jim you stop riding? those discs look pretty clean.  LOL  Doc

[georgw221]

Two Questions,

1.Has anyone installed a CR-575 in a 96"

2.If they used the Supertrapp Fatshots or SE Fatshotz ,,, How many discs did you use?

[Herko]

"1.Has anyone installed a CR-575 in a 96" "

I can answer question 1.
See attached: (2010 96 inch bike, heads never removed).

[Unbalanced]

Herko,

Any feedback to the top end noise of the CR 575 vs. say one of the other cams that play in this real like Wood 555, Andrews 54, Zippers 575 etc ?

[Herko]

Herko,

Any feedback to the top end noise of the CR 575 vs. say one of the other cams that play in this real like Wood 555, Andrews 54, Zippers 575 etc ?

The CR-575's are consistently quiet. Ramp speeds biased for quiet operation was part of the design criteria.

[Unbalanced]

Herko one other question is what was the CCP of this 96 motor, I am asking because we are considering picking up a 2011 Limited Ultra.