Topic: Rocker Supports (Read 1175 times)

Ridgerunr · « **on:** July 28, 2019, 04:15:15 PM »

Are forged rocker supports needed with a .575" lift cam in a 110"? I say no, friend says yes.

fastfreddy · « **Reply #1 on:** July 28, 2019, 05:15:39 PM »

in my 13 I ran a tman 625 with stock rockers/ supports with no issues, I think you should be good... my 2 cents. and the 255 cam is at .555 lift

grc · « **Reply #2 on:** July 28, 2019, 07:22:16 PM »

Quote from: Ridgerunr on July 28, 2019, 04:15:15 PM

Are forged rocker supports needed with a .575" lift cam in a 110"? I say no, friend says yes.

No. Stock rocker supports are not known for major failures even with much more radical cams than what you're talking about. While you have things torn down you might want to install "rocker lockers" or something similar to keep the rocker arm shafts from adding to the valve train noise, but you don't need forged supports.

Jerry

Sprintkid · « **Reply #3 on:** July 28, 2019, 09:56:17 PM »

Running same cam as Freddy....Tman 625....40,000 mi with no issues

hd-dude · « **Reply #4 on:** July 28, 2019, 11:49:35 PM »

Nope, not needed at all.

Ridgerunr · « **Reply #5 on:** July 29, 2019, 08:01:57 AM »

"might want to install "rocker lockers" or something similar to keep the rocker arm shafts from adding to the valve train noise,"

Excellent advice, thank you.

prodrag1320 · « **Reply #6 on:** July 30, 2019, 07:05:36 AM »

your OEM supports are fine

Author Topic: Rocker Supports (Read 1175 times)

Ridgerunr

Rocker Supports

fastfreddy

Re: Rocker Supports

grc

Re: Rocker Supports

Sprintkid

Re: Rocker Supports

hd-dude

Re: Rocker Supports

Ridgerunr

Re: Rocker Supports

prodrag1320

Re: Rocker Supports