www.CVOHARLEY.com
CVO Technical => Intake/Exhaust/ECM => Topic started by: danner55 on July 14, 2019, 03:36:38 PM
-
Alright I'll pic some brains. I'm exhausting my breathers through a line down along the frame.I'm looking for ideas for a catch can to connect the line to. I've seen what J&P Cycles but looking for something than I can attach a 1/4" line to. Not looking to put the breather filter style in line as I want to eliminate any blow by on my frame.
Thank & Ride Safe!
-
Alright I'll pic some brains. I'm exhausting my breathers through a line down along the frame.I'm looking for ideas for a catch can to connect the line to. I've seen what J&P Cycles but looking for something than I can attach a 1/4" line to. Not looking to put the breather filter style in line as I want to eliminate any blow by on my frame.
Thank & Ride Safe!
I’d like to get one
Jeremy 2019 Street Glide CVO Black Forest
-
Alright I'll pic some brains. I'm exhausting my breathers through a line down along the frame.I'm looking for ideas for a catch can to connect the line to. I've seen what J&P Cycles but looking for something than I can attach a 1/4" line to. Not looking to put the breather filter style in line as I want to eliminate any blow by on my frame.
Thank & Ride Safe!
I’ll assume you’re working on a FLH?
Late model?
I’ll have to get some pics what I ended up with my S&S motor
Short story is I merged the two head breather hoses to my 2 part catch can mounted just behind the primary case. I took off the little breather filter and ran a hard plastic hose up and followed the rear fender line right to the rear bumper. Hose ends there and no drips.
There is a drain on the can that I empty after every ride.
Works fine for me.
8)
-
HOGMIKE,
I'm riding an 2011 CVO Ultra & I've got 2 breather lines going into 1. I'm looking for the exact set up that you are running, Do have any pics & info on the catch can you are running?
Thanks!
-
I think I got the can from Summit years ago
-
Hard to see but the hose comes off the top following the fender curve sort of
-
Ends up at the fender tip, this was a “temporary” install that I’ve left for years.
-
Right side vents
-
Vent line goes under the trans to the catch can
-
Thanks Mike!