Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: How to clean engine cooling fins  (Read 6082 times)

0 Members and 1 Guest are viewing this topic.

Paulgta

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
  • www.CVOHARLEY.com
    • MA

How to clean engine cooling fins
« on: March 09, 2023, 12:28:48 PM »

Hey guys any tips for cleaning the edges of the cylinder heads? And not staining the black parts of the motor
Logged

KGB

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1242
  • www.CVOHARLEY.com
    • OH


    • CVO1: 2016 FLHXSE Carbon Crystal with Phantom Flames
    • CVO2: 2019 FLHTKSE Magnetic Grey/Wineberry w Red Pepper
Re: How to clean engine cooling fins
« Reply #1 on: March 09, 2023, 01:57:17 PM »

I have used this on 2016 CVO SG with black engine, worked fairly well on the cylinders and heads

https://www.harley-davidson.com/us/en/shop/engine-brightener/p/93600002
Logged
2018 MITM Eureka Springs
2018 WV GTG
2018 Maggie Valley GTG
2019 MITM Eureka Springs
2019 Maggie Valley GTG
2020 Maggie Valley GTG
2021 WV GTG
2021 Maggie Valley GTG
2022 Ohio GTG
2023 Maggie Valley GTG

ultra13

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 517
  • www.CVOHARLEY.com
    • OH


    • CVO1: 2013 CVO Ultra
Re: How to clean engine cooling fins
« Reply #2 on: March 10, 2023, 01:36:50 PM »

For cleaning the inside of the fins I use a foam paint brush made for edging. Depending how dirty, I use water or Mineral Spirits. For the edges (shiny part), I have used some light steel wool. When done with all that I use engine brightener. Love that stuff....
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4082

Re: How to clean engine cooling fins
« Reply #3 on: March 27, 2023, 07:01:26 PM »

    WD40,  spray it on let it sit for a good haft hour  then wash as normal using a HD motor scrub brush or equivalent. I use it on mine and it lifts off any road   stains.
Like mentioned,  spray it on a foam paint brush and rubb the fin edges
« Last Edit: March 27, 2023, 07:04:47 PM by longlast »
Logged

Finster101

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 242
Re: How to clean engine cooling fins
« Reply #4 on: March 28, 2023, 05:58:40 PM »

I use tire foam on the black motors.  At least the night before, sometimes a couple of days even if I have time before I'm going to wash the bike I put cardboard under it in the garage and spray the engine, trans and primary really well with tire foam and leave it.  It bubbles the grime away and seems to renew the black wrinkle finish with a little luster.  Washing it removes the shine. 
Logged
 

Page created in 0.216 seconds with 21 queries.