Topic: Boom Can's Exhaust (Read 25682 times)

TNT · « **on:** July 20, 2009, 08:04:09 AM »

Does anyone know where i can purchase Boom Can's slip on exhaust's for my 09 SERG?? Bigger diameter is better, i think they are 6" or 7". I cant seem to locate any. Thanks

LarryB · « **Reply #1 on:** July 20, 2009, 08:10:54 AM »

never even heard of them

RickC · « **Reply #2 on:** July 20, 2009, 08:13:03 AM »

The only place that came up on a Google search was Dirt Cheap Parts at $315.95. See their product page at http://www.dirtcheapparts.com/customparts_4_042.htm

From what I see on the Dirt Cheap Parts product page, it looks like the Boom Cans are made by Drag Specialties. However, searching the online Drag Specialties FatBook, I couldn't find them listed there.

HTH.

LarryB · « **Reply #3 on:** July 20, 2009, 08:19:11 AM »

ok i know them . but the baffle looks like a fullsac, so , no more sound than our set up

sem_bunda · « **Reply #4 on:** July 20, 2009, 11:32:35 PM »

Never seen a bike with them and never heard of them.

Highjagger · « **Reply #5 on:** July 21, 2009, 01:46:41 AM »

Here they are : http://www.milwaukeebagger.com/

Highjagger · « **Reply #6 on:** July 21, 2009, 01:47:17 AM »

and :

Highjagger · « **Reply #7 on:** July 21, 2009, 01:48:37 AM »

Have you seen the tailgunners yet : http://tailgunner-exhaust.com/performance08.php

TNT · « **Reply #8 on:** July 21, 2009, 04:49:43 PM »

Thanks for the advise, looks like $500 buys a set from Milwakee Baggers, not sure why drag specialties dont list them on there site ??

Wheelsnkeels · « **Reply #9 on:** October 30, 2009, 02:28:16 PM »

Did you buy them?
I like them and had them on a custom but thought they would be to large for the 2010 SESG?
Curious if they fit your bike they should fit on mine!

Wheelsnkeels · « **Reply #10 on:** November 03, 2009, 04:50:11 PM »

Ordered mine yesterday!
Are they here yet?

Beach Bum · « **Reply #11 on:** November 04, 2009, 02:16:07 PM »

I like the looks of these pipes though I haven't seen them on a SERG. Would be interested in reading responses about the sound. Much better looking IMHO than stock pipes with Fullsac. I'm running D&D 2 into 1 with ghost pipe, so not planning on changing out soon, however.........if they sound as good as they look, this could be interesting!!

Wheelsnkeels · « **Reply #12 on:** November 04, 2009, 02:31:21 PM »

Should have them installed on my SESG next week I"ll post pic's then. I've ridden a friends bike with them installed and they sound sweet!

Maybe I can get an audio clip to post?

Ordered through Mark at http://www.mandmcycles.com

Wheelsnkeels · « **Reply #13 on:** November 04, 2009, 02:40:58 PM »

Here is a pic of the bike I tried them on

Wheelsnkeels · « **Reply #14 on:** November 04, 2009, 02:42:33 PM »

2008 Street Glide

LarryB · « **Reply #15 on:** November 04, 2009, 06:40:32 PM »

Quote from: Wheelsnkeels on November 04, 2009, 02:42:33 PM

2008 Street Glide

Dayuum, I like those and have looked at them before, what do they sound like

Wheelsnkeels · « **Reply #16 on:** November 04, 2009, 07:54:01 PM »

Not the best example but here they are on an old bagger when Drag Specialties made them.

Not sure where they are made now but my dealer got them through www.milwaukeebagger.com

Replacement mufflers:Slips on to factory header pipes or True Duals with removable baffles.
Length: Top 27 1/2" Bottom 30 3/4"
Dia: 5 1/4"W X 6 3/4"H
For baggers that like the Big look.(Note: will not fit Rinehart header pipes)

southtxcruiser · « **Reply #17 on:** November 04, 2009, 09:47:01 PM »

those are very sweet looking....wonder if the mesh covers on the first pic are remvable...

LarryB · « **Reply #18 on:** November 05, 2009, 07:55:06 AM »

Quote from: southtxcruiser on November 04, 2009, 09:47:01 PM

those are very sweet looking....wonder if the mesh covers on the first pic are remvable...

have dremel will travel

Wheelsnkeels · « **Reply #19 on:** November 16, 2009, 05:52:37 PM »

Installed my V&H Power Duals today

along with my Boom cans

Here is a link to them both

Wheelsnkeels · « **Reply #20 on:** November 16, 2009, 05:54:26 PM »

Quote from: southtxcruiser on November 04, 2009, 09:47:01 PM

those are very sweet looking....wonder if the mesh covers on the first pic are remvable...

They dont come with the mesh they are just inserted by the vendor for pictures actually they dont even sell them??

southtxcruiser · « **Reply #21 on:** November 16, 2009, 06:07:08 PM »

very nice looking.... too bad they dont have the mesh tips..... still sweet looking though

Fireguy · « **Reply #22 on:** November 16, 2009, 07:15:41 PM »

Very nice. I think the first I would do before installing them is paint the inside of the mufflers with flat black heat paint.

Fired00d · « **Reply #23 on:** November 16, 2009, 07:25:24 PM »

Quote from: Fireguy on November 16, 2009, 07:15:41 PM

Very nice. I think the first I would do before installing them is paint the inside of the mufflers with flat black heat paint.

Now that you mention that painting the inside would set them off and give the impression that there isn't that smaller opening (baffle) in there.

But after running them awhile exhaust soot may do the same.

Ride Safe,
Fired00d

Wheelsnkeels · « **Reply #24 on:** November 16, 2009, 07:33:06 PM »

Quote from: Fired00d on November 16, 2009, 07:25:24 PM

Now that you mention that painting the inside would set them off and give the impression that there isn't that smaller opening (baffle) in there. But after running them awhile exhaust soot may do the same.

Ride Safe,
Fired00d

That was the same conclusion I came to

Fireguy · « **Reply #25 on:** November 16, 2009, 08:34:37 PM »

This is true but if you look at the 2 pipes after awhile of riding, the left one will not be as black as the right. The right side flows more exhaust than the left. Hence the flat black paint.

Wheelsnkeels · « **Reply #26 on:** November 16, 2009, 08:48:48 PM »

Yes I agree they should be built that way

Highwaystar · « **Reply #27 on:** November 16, 2009, 11:37:15 PM »

Kind of a small baffle? Has any one Dyno'd these yet?

Highjagger · « **Reply #28 on:** November 17, 2009, 02:06:18 AM »

Quote from: Wheelsnkeels on November 16, 2009, 05:52:37 PM

Installed my V&H Power Duals today

along with my Boom cans

Here is a link to them both

Really very awesome sound , I like em very much , but you would get a big bump by the police using them here in Germany , a very big aching bump .....

Wheelsnkeels · « **Reply #29 on:** November 29, 2009, 02:08:37 PM »

Found Boom Cans on Bub's Web site today @ $400.00 best price I've seen

Also more than I paid

http://bub.com/Harley_Davidson_FL_Touring_Models.cfm?pa=list&psearch=&zsb=0&sc1=Harley%20Davidson&sc2=FL%20Touring&sc3=Slip%2DOns

JOETOMFOHRDE · « **Reply #30 on:** December 01, 2009, 08:37:44 AM »

Drag Spec quit having them made several year ago. They are a good pipe my uncle runs them on his roadglide. If you want to hear something loud take the baff out.... Sound like a stock car going around the track..

Wheelsnkeels · « **Reply #31 on:** December 01, 2009, 10:05:21 AM »

There you go Larry and maybe you could just stick a Budweiser Can in there to get the tone right?

Wheelsnkeels · « **Reply #32 on:** December 01, 2009, 10:07:27 AM »

Quote from: Fired00d on November 16, 2009, 07:25:24 PM

Now that you mention that painting the inside would set them off and give the impression that there isn't that smaller opening (baffle) in there. But after running them awhile exhaust soot may do the same.

Ride Safe,
Fired00d

After 1000 miles they colored themselves fine?

Wheelsnkeels · « **Reply #33 on:** December 01, 2009, 10:08:24 AM »

another angle

Fired00d · « **Reply #34 on:** December 01, 2009, 10:34:44 AM »

Quote from: Wheelsnkeels on December 01, 2009, 10:07:27 AM

After 1000 miles they colored themselves fine?

Looking much better.

What do they look like dead on from the back? Can you still see the smaller baffle opening?

Ride Safe,
Fired00d

Puzzled · « **Reply #35 on:** December 24, 2009, 10:33:07 PM »

Hognuts · « **Reply #36 on:** January 22, 2011, 03:58:30 PM »

Quote from: TNT on July 20, 2009, 08:04:09 AM

Does anyone know where i can purchase Boom Can's slip on exhaust's for my 09 SERG?? Bigger diameter is better, i think they are 6" or 7". I cant seem to locate any. Thanks

West end Motor sports has them for $297.50

Gettinold · « **Reply #37 on:** January 22, 2011, 05:47:15 PM »

Quote from: Hognuts on January 22, 2011, 03:58:30 PM

West end Motor sports has them for $297.50

faceracer · « **Reply #38 on:** January 23, 2011, 02:55:11 PM »

Quote from: TNT on July 20, 2009, 08:04:09 AM

Does anyone know where i can purchase Boom Can's slip on exhaust's for my 09 SERG?? Bigger diameter is better, i think they are 6" or 7". I cant seem to locate any. Thanks

I bought mine direct from bub. http://www.bubent.com/

Yellow09SERG · « **Reply #39 on:** July 28, 2013, 11:29:32 AM »

Old thread but has anyone else gave these a try recently? What does the sound compared too?

BigLew · « **Reply #40 on:** August 02, 2013, 04:43:41 PM »

They are a little softer than the fullsac 2" baffles. I lost torque and HP with mine.

BigLew

Yellow09SERG · « **Reply #41 on:** August 03, 2013, 02:53:49 AM »

Thank you BigLew. That was what I was wanting to know

Author Topic: Boom Can's Exhaust (Read 25682 times)