www.CVOHARLEY.com

Custom Vehicle Discussions => 2001 FXDWG2/2002 FXDWG3 => Topic started by: JakesFXDWG2 on September 19, 2008, 12:14:29 AM

Title: Leaky Inner primary
Post by: JakesFXDWG2 on September 19, 2008, 12:14:29 AM

The guy i bought my bike from chromed out the inner primary on my bike and he didnt have enough miles on it for him to notice a leak, so when i started riding it the leak started and i was wondering if there was a better gasket that i could get that would prevent this from leaking again.

Title: Re: Leaky Inner primary
Post by: Fired00d on September 19, 2008, 06:33:49 PM

Take a look at this thread - Transmission Jackshaft Leak? (http://www.cvoharley.com/smf/index.php?topic=25756.0) to see if this is what you have, and particularly this post (http://www.cvoharley.com/smf/index.php?topic=25756.msg417826#msg417826) in regard to what gasket to use.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Title: Re: Leaky Inner primary
Post by: JakesFXDWG2 on September 19, 2008, 07:29:55 PM

hey thanks a lot! much appreciated.

Title: Re: Leaky Inner primary
Post by: Fired00d on September 19, 2008, 07:31:34 PM

You're welcome glad to help. :2vrolijk_21: When you get a chance you should go to this board - New Member Introduction (http://www.cvoharley.com/smf/index.php/board,30.0.html) and start a thread to introduce yourself.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman: