I do all the service on my bike, 2015 CVO Limited. Do this service at 5,000 miles.
Closing in on 20,000 miles, not used much the last couple years.
I didn't drain engine and transmission separately but did the primary oil into a gallon oil jug with the face cut open so it fit under the drain plug.
While it was draining I looked up the fill capacity of 38 ounces.
I decided to pour the old oil into an empty qt bottle just to check what amount came out. Well I filled 2 qt bottles.
Do these 2015 110's have an oil migration issue?
When I refilled it, the bike was on the jack level, 38 ounces was below the opening on the cover, and I doubt you can get 64 ounces in without leaning the bike far to the right.
Any thoughts on this?