www.CVOHARLEY.com

CVO Technical => Electronic Toys and Gadgets => Topic started by: Nad on October 28, 2017, 12:39:09 PM

Title: Wiring Driving Lights.
Post by: Nad on October 28, 2017, 12:39:09 PM

 ::). I am attempting to wire aftermarket driving lights on my 2017 FLHXSE. My questions: I would like to wire the lights into an aux/acc switch on the dash. can I use the existing wiring?  I see there is a 2 pin wire on left side, which connects to the turn signal. Can I plug both driving lamps into that, and install a left side switch assembly (like the stock Ultra). Or, is there an easier, less expensive way to go? 

Title: Re: Wiring Driving Lights.
Post by: efrbc1 on October 28, 2017, 02:35:25 PM

Curious as to what kind of lights you purchased.

Chris

Title: Re: Wiring Driving Lights.
Post by: Nad on October 28, 2017, 02:40:04 PM

Not sure if the actual make (not at home), inexpensive LED lights off from Amazon.

Title: Re: Wiring Driving Lights.
Post by: longlast on October 28, 2017, 10:35:10 PM

Shoot some pics see what you got.

Title: Re: Wiring Driving Lights.
Post by: Nad on October 29, 2017, 08:35:15 AM

Here is a pic of the lights. Basic two wires.

Title: Re: Wiring Driving Lights.
Post by: Nad on October 29, 2017, 08:41:27 AM

Possible wiring location.