Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TimBone]

I am at it again, just added this puppy to my bike!  Nothing like some extra light on the rear and I was really digging this on the Street Glides.
You guys have heard me talk about my buddies with the FLHX Street Glides and their Zippers TMax gear, so I had to get me that cool looking light for
my fender.
Install was very easy and instead of drilling into the Fender, I went with the SUPER sticky 3M double sided tape and it should hold nicely on the fender.  Wiring was a cinch and it plugged right into the open plug in the Tour Pak!

[TimBone]

Lit up.

[VaEagle]

That looks great tigertr71! 

I went with the standard fender led with chrome fender bumper myself. I thought it went well with my saddlebag guards. I like the look you have too.
I wanted to use my Tour Pak plug for the LED light strip added to the back of the TourPak. Not sure where the shop attached my fender light? Guessing the tail light area.

[TimBone]

Thanks Eagle,
I too will be doing the strip acoss my Tour Pak.  I saw Hard 10s up close and it is a great piece of gear and bright. 
When I do that add-on I will make a 2 into 1 harness to plug both into the tour pak plug as to not splice into any
stock wires.
Your bike looks great especially with the Bag Guards and matching fender piece.
The possibilities are endless for us guys!!!

[TimBone]

A look in the dark...

[Fired00d]

Looks nice. BTW - Did you have any trouble acquiring that piece. I believe it's been said before that if you didn't own a FLHX or have a VIN for one that you couldn't order/purchase that part.

 
Ride Safe,
Fired00d
 

[Hoist!]

Hey Tim, that looks great back there. Really good, clean look in the dark! Hoist!

[TimBone]

Hoist, Thanks
I still need to add the strip on the Tour Pak, but this should get me through Daytona, HaHa.
Man it sure is fun adding new stuff to our bikes!!!

TimBone

[Twolanerider]

That's a nice looking addition Tim.  Did you get one that was black to begin with?  Or paint it to match your stripes?  Either way it's a nice looking combination. 

One of the friends here was kind enough to order a "spare" for his FLHX and that spare has magically made it's way across country to my garage.  Only just got it a few days ago though.  I've still got to get it painted and then figure out mounting and wiring.

I'm so far ahead of myself on this I don't even know if they light up just for running light or running light and brake light?  Sometime when you've got a moment would mind describing the physical mount at the fender also; where you used the 3M tape?  I'm always willing to be lazy and benefit from someone else's experience.

Looks great on the bike though.  Congrats on getting it installed.

[SPIDERMAN]

I am at it again, just added this puppy to my bike!  Nothing like some extra light on the rear and I was really digging this on the Street Glides.
You guys have heard me talk about my buddies with the FLHX Street Glides and their Zippers TMax gear, so I had to get me that cool looking light for
my fender.
Install was very easy and instead of drilling into the Fender, I went with the SUPER sticky 3M double sided tape and it should hold nicely on the fender.  Wiring was a cinch and it plugged right into the open plug in the Tour Pak!

Yes, they're VIN protected. Course everyone knows someone with a StreetGlide, so that shouldn't be a chore.


How much did it cost ?

B B

[TimBone]

That's a nice looking addition Tim.  Did you get one that was black to begin with?  Or paint it to match your stripes?  Either way it's a nice looking combination. 

One of the friends here was kind enough to order a "spare" for his FLHX and that spare has magically made it's way across country to my garage.  Only just got it a few days ago though.  I've still got to get it painted and then figure out mounting and wiring.

I'm so far ahead of myself on this I don't even know if they light up just for running light or running light and brake light?  Sometime when you've got a moment would mind describing the physical mount at the fender also; where you used the 3M tape?  I'm always willing to be lazy and benefit from someone else's experience.

Looks great on the bike though.  Congrats on getting it installed.

Twolane,
I will snap a few pics of where I used the 3M tape.  I figured it would be an easy clean up if I ever wanted to remove it ad back to original.
It is only a running light. You will have no problem doing the install.  Total time was 1 hour of anal cleaning nad lining up!

TimBone

[Twolanerider]

Twolane,
I will snap a few pics of where I used the 3M tape.  I figured it would be an easy clean up if I ever wanted to remove it ad back to original.
It is only a running light. You will have no problem doing the install.  Total time was 1 hour of anal cleaning nad lining up!

TimBone

Thankyewsir!  I've already got a spare running light and ground wire up by the left strut that could be dropped down easily too.  Brake light meant I would have had to open a harness back up that I just got through reworking.  So it doesn't really break my heart that it's not a brake light too.

I've only got the body cladding so far.  The light kit isn't VIN restricted so can get it myself.  What kind of bulb is in it, LED or an incandescent of some kind?

[TimBone]

Let me check on the bulb type.  It seems as though it was built into the housing.
Do you want me to send you the light/housing part number?

[Twolanerider]

Let me check on the bulb type.  It seems as though it was built into the housing.
Do you want me to send you the light/housing part number?

Only if you've got it easily available.  I can always get it from the local parts counter.  If I bug them for the number I'll probably order it from just because they helped.  Get it otherwise I'll order it online and save lunch money though.

[Jester_Red07]

Looks Good!!! I like it!