www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin' EagleĀ® Road GlideĀ® => Topic started by: hoister139 on February 06, 2018, 01:54:22 PM
-
Hey everyone! I snagged the right side tank medallion on my 09 RG getting off the motorcycle. I somehow snagged it and tore off the pointed end and pealed the end away from the tank. Does anyone have the part number and the price on a replacement medallion? Thanks in advance for the help!
-
62776-09 for the left side
62777-09 for the right side
Suggested Retail is 67.99 a piece :o
-
I personally hate the pointed ends on the logo. Always doing the same but have not ripped it off yet. I was really thinking about having the logo painted on. Would make for a no snag logo.
:oops: :nixweiss:
-
I personally hate the pointed ends on the logo. Always doing the same but have not ripped it off yet. I was really thinking about having the logo painted on. Would make for a no snag logo.
:oops: :nixweiss:
'Learned about the pointed ends the 1st time I wiped down the tank :'( only took 1 time,,, OUCH!!
-
Most bikes look pretty good with no badge
-
Snagged the money side of the tank medallion on my '15 while washing. Instead of replacing that dang thing and taking another chance, I removed both sides. Have had lots of comments on it since and am still glad I did....makes cleaning/waxing the tank much easier, too.
-
Primary side
-
As long as you are replacing, look at other options
-
Hey everyone! I snagged the right side tank medallion on my 09 RG getting off the motorcycle. I somehow snagged it and tore off the pointed end and pealed the end away from the tank. Does anyone have the part number and the price on a replacement medallion? Thanks in advance for the help!
Thanks everyone! I'm going to consider my options and go from there. Looks good both ways, with and without the medallion.
-
Mine didn't break. I just didn't like having the same crappy ones that all Harleys had in 2015. I got some of the Eagles like in pic above. I took mine off and haven't decided if I'm putting Eagles on or not. I think I may have originals lying around if you want them.
-
Hung the badge on my 2015 CVORGU twice and tore it loose. Badge was just thin sheet metal with a plastic filler underneath. Dealer replaced it the first time under warranty and probably would have the second. After the second one came loose I took both off and replaced with the eagle head in bigchuck's photo above. Its a bit heavier metal with fewer sharp edges and so far so good.
-
I ended up putting the Emblem from the 2011 CVO Street Glide on the tank. It didn't look all that bad without the stock emblems but it really looks sweet with the ones from the "11 SG. Good idea bigchuck ! Thanks.
-
As long as you are replacing, look at other options
I agree... This is the 3rd tank badge I've had on mine, making it unique. ;D
-
I ended up putting the Emblem from the 2011 CVO Street Glide on the tank. It didn't look all that bad without the stock emblems but it really looks sweet with the ones from the "11 SG. Good idea bigchuck ! Thanks.
Glad it worked out for you. The only tank badges I like better are the painted on ones.
-
G'Day all y'all,
Anybody got a part number for the screaming eagle badges?
Cheers Tom
-
ya gotta be a little more specific than that. what year? what model bike?
you can look up the one you want yourself here: https://shop.outpostalaska.com/OEMpartfinder.htm
-
Each side has its own number and for some reason they used a third and fourth number the next year, even though they are the same parts, the difference is one set for the second year is $179.00
And the other set is twenty dollars more so double check the part numbers and get the cheaper price.
-
G'Day all y'all,
Anybody got a part number for the screaming eagle badges?
Cheers Tom
Here you go Tom...
L- 62780-11
R- 62781-11
in Canada they cost me $101.95 each which is in line with the $79.95 US price.
-
Thanks very much Mr Grizzly
Sent from my iPhone using Tapatalk
-
My tank is in need of a repaint, the clear lifted especially around the badging. Does anyone know of a place that has replacement badging for an 01 SE road glide. They look like decals that were put on and then cleared over.
Any help would be appreciated
-
Hey everyone! I snagged the right side tank medallion on my 09 RG getting off the motorcycle. I somehow snagged it and tore off the pointed end and pealed the end away from the tank. Does anyone have the part number and the price on a replacement medallion? Thanks in advance for the help!
I know I'm late to the party but back in 09 I bought a pair for my (Then new) 09 CVO Road Glide.
If you're still looking I can go dig in my storage and see if they are still in the wrapper and still in one piece...
-
This may be day late and a dollar short but where have you guys been buying the eagle tank emblem? I want to put it on my 13'. The dealer said I can't order an off year item. :soapbox:
-
Generally you just need a VIN from the model that has the emblem or part and give it to your guy at the parts counter. From there it's up to his/her discretion whether they choose to be a hero or a zero.
-
This may be day late and a dollar short but where have you guys been buying the eagle tank emblem? I want to put it on my 13'. The dealer said I can't order an off year item. :soapbox:
Your dealer is an idiot. Those are not even vin restricted. At least they weren't the last time I bought some from my local dealer.
-
This may be day late and a dollar short but where have you guys been buying the eagle tank emblem? I want to put it on my 13'. The dealer said I can't order an off year item. :soapbox:
Ebay :2vrolijk_21: