www.CVOHARLEY.com
CVO Technical => Wheels/Tires/Suspension/Brakes => Topic started by: Puzzled on May 03, 2007, 07:54:31 PM
-
I'm looking for a measurement from the top shock bolt hole to the bottom bolt hole with the tire all the way up and into the fender. At what point does the tire contact the fender?
From memory I thought it was around 10". However I've heard of guys running at 9 1/2". I thought all the hoopla over Draggin' Bagger shocks was the fact they would allow the tire to hit the fender when the air was dumped. If this is the case than they were using 9 1/2" shocks or so I thought.