www.CVOHARLEY.com
CVO Technical => Twin Cam => Topic started by: firegabe on February 17, 2006, 03:32:06 AM
-
Is this something I can do at home?
Any special do's and Dont's?
Thanks in advance!!
Gabe
-
THE BIG DON'T is OVER TIGHTEN slapping stinks true as it is .. but over tight will just eat into the plastic cut a groove and then the primary is coming off. While it is not hard to adjust it, I would not touch it unless your certain you understand the tolerances and where to measure them from.
-harry
-
Is this something I can do at home?
-
Are we talking primary chain or cam chain tensioners?
-
[smiley=oops.gif] I thought he was talking about primary tensioners - sorry about that. To quote Dan Quale, "a mind is a terrible thing to lose". I'm going to have to tie a string to that sucker.
Jerry
-
Is this something I can do at home?
-
Sorry Guys, My 40th birthday is coming around real soon I read it and reread it and still it made perfect sense that he was tlalking bout primary hehe ..... sorry guys ...
-
[highlight]Sorry Guys, My 40th birthday is coming around real soon[/highlight]....
Speaking of "birthdays" I remember that birthdays used to be listed at bottom of homepage. Did we loose that with one of the software updates?
[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]
-
Speaking of "birthdays" I remember that birthdays used to be listed at bottom of homepage. Did we loose that with one of the software updates?
[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]
Yeah, what happened to that little tidbit of information, Your Honor? [smiley=nixweiss.gif] That was neat! Later--HUBBARD
-
Speaking of "birthdays" I remember that birthdays used to be listed at bottom of homepage. Did we loose that with one of the software updates?
[smiley=pumpkin.gif]
Ride Safe,
Fired00d
[smiley=fireman.gif]
'd00d,
Some of us have chosen to freeze time and deny all knowlege of birthdays. [smiley=xyxthumbs.gif]
Jerry
-
'd00d,
Some of us have chosen to freeze time and deny all knowlege of birthdays.
-
Thanks everyone!! I'm going to take it to the dealer, at 12k. miles I'll happly spend the $ for a long lasting bike
-
Quote from HEADPAN62 on Feb 22nd, 2006, 7:28am:
y r u changing the gear in the cam,I did a 10,000 check on the tensioners and they looked stock,barely any wear..I will inspect again b4 my west coast trip...I have a black 01, I'm from jersey
HERE THIS IS COOL OTIS MAY WANNA POST IN THE GENERAL FILE....
http://www.harleyhog.co.uk/tensionerinstall.htm
I think everyone will like this thanks to Tony 1968 I took from Road Glides to twin cams so more people could see this.
OTIS [smiley=xyxthumbs.gif]
-
AHHHHH the link for the instructions dosn't work!! and I'm getting ready to do this. :(
Dose any one have the instructions saved on thier computer? Please I need the help!
thanks in advance!
Gabe
-
AHHHHH
-
It's not the specific link, the entire site is currently down.
-
Actually, that happens near the end of every month. First time I ran into it, I thought the same thing - someone from H-D had the plug pulled.
-
That's good to know Jerry.