As a few others have noted, there are some issues trying to use the wireless headsets, especially with a half helmet. The mic just wants to stay on all the time, etc. Well I have a bunch of J&M wired headsets and they work absolutely wonderfully in the same situation.
So, how can I add a wired headset connection to my 2019 bike? It came with the WHIM and isn't set up for adding the 7 pin.
There is a connector (on the road glide) on the right side as you are looking in the front of the fairing that fits the connector for the 7 pin cable from the 2015 bike, but if you disconnect that cable it turns off the bike. Seems like there is a jumper cable of some sort that goes in the earlier bike that gives you another connection so you can plug in that headset cord. And the 2019 Ultra has a headset and you have to add the WHIM. So maybe there is a cable setup that will work for this. The cable that connects to the WHIM module itself is actually a pin wider so that's not the right one. I'd appreciate any directions.
Thanks!