Topic: SEFLSTF (Read 21351 times)

Cannibus_Man · « **on:** December 17, 2004, 01:19:56 AM »

I bought my First bike ever back in august,,i just found this web site and thought that this is cool !!! im anxiuos to modify this bike!!!!!! ~late~Cann

Twolanerider · « **Reply #1 on:** December 17, 2004, 11:31:11 AM »

Oh man, I can't believe you'd store such a great looking bike in the same room with a case of Corona. That's like keeping a fine diamond next to donkey pee in a bottle! [smiley=drink.gif]

Jock · « **Reply #2 on:** December 18, 2004, 10:04:57 PM »

cool lookin' pic!

Good Luck w/ the bike and Be Safe!

Cannibus_Man · « **Reply #3 on:** December 18, 2004, 11:09:58 PM »

thank you ,,,Today i put some chrome on,,,,,,,here are the before n after pics,,,
p.n#32753-01 and 37982-04 [smiley=xyxthumbs.gif]

reo · « **Reply #4 on:** December 18, 2004, 11:20:21 PM »

Nice to see another cvo fatboy on these boards, good job on the pic's also. I see you've also got the addiction to chrome, looks good Cannibus_Man. Must be nice living in California, its 20 degrees here in Illinois 10 degrees tomarro and I dont have heat in my garage yet so it will be a while before I get the rest of the chrome on my bike.

reo....

Cannibus_Man · « **Reply #5 on:** December 19, 2004, 01:06:34 AM »

ya,,, winter starts Dec,22 i think ,,, roll the bike in the house ,,, through the patio door if ya have one,,, lol where theres a will there is a way,, thermal underwear [smiley=laugh.gif]

Tony - www.1700cc.co.uk · « **Reply #6 on:** December 19, 2004, 07:30:09 AM »

Quote

Oh man, I can't believe you'd store such a great looking bike in the same room with a case of Corona.

DW6019 · « **Reply #7 on:** December 19, 2004, 02:22:17 PM »

$27,000 Dollar bike and $69.95 Saddlebags, Can, you CAN do better!!! Nice bike really.

Cannibus_Man · « **Reply #8 on:** December 19, 2004, 03:32:23 PM »

ya your right , i have the cheep bags on,, but i really couldnt fit anything else on till i put the pipes on,, if ya look in the harley catalog it says that the harley bags wont fit with rear axle covers either . so actually im kinda stuck any suggestions? im planning on puttin on the big shot staggard pipes, so i should have more room also

no-rain · « **Reply #9 on:** December 19, 2004, 03:40:37 PM »

Cannibus_Man, excellent choice of pipes (big shot staggered) [smiley=xyxthumbs.gif]; mine have been sitting is a box for 2 months now just waiting for my bike to come in. The dealership is telling me that the bike will be here the first week of Jan.

mfgreen · « **Reply #10 on:** December 19, 2004, 03:42:55 PM »

I've seen a couple Fat boys with hard bags that have looked good.

microwave · « **Reply #11 on:** December 19, 2004, 04:35:01 PM »

IDEA FOR THE BAGS YEA DITCH THE BAGS A BIKE THAT LOOKS THAT GOOD NOW LOOKS DULL IF YEA NEED BAGS GET THE REMOVABLE ONES AND KEEP EM ON AS LESS AS POSSABLE OR IF IT CANT FIT IN YOUR POCKETS YA DONT NEED IT.

Twolanerider · « **Reply #12 on:** December 19, 2004, 04:43:49 PM »

Quote

2 Lane,
You are going to have to explain that one. I can't spot the cheap Mexican falling down water!

Tony,
I think the shame of it all must have gotten the best of him as the original posting I responded to has now been pulled or modified. That donkey pee just isn't there anymore [smiley=nixweiss.gif] .

Cannibus_Man · « **Reply #13 on:** December 19, 2004, 05:38:56 PM »

rainman,
i'll bet ya can't wait.. what color did you get? i was wanting a silver one, but this bike became available early so i got it,,i was told that the last 6 digits on the frame are the sequential number that the bike was made..i landed #129

two lane , i'll send ya a sixer (your choice) [smiley=beerchug.gif]

no-rain · « **Reply #14 on:** December 19, 2004, 06:22:02 PM »

I am getting a red one which is what I asked for. When you get your pipes on, please post a pic. Regards

DW6019 · « **Reply #15 on:** December 19, 2004, 06:35:22 PM »

Rainman, I am originally from the L-Ville area. Did you buy from dealer off I-65 or the new one out east?
I stopped at the L-Ville HD last year and was amazed at how high the prices were and when I went to buy a t-shirt, instead of asking me if I needed anything else, the two girls at the counter were rudely telling me all sales were final, no returns, only store credit etc. Very poor attitude.
Good luck with new bike.

no-rain · « **Reply #16 on:** December 19, 2004, 06:53:52 PM »

Neither

ashcraft · « **Reply #17 on:** December 19, 2004, 07:25:03 PM »

Rainman, come on down to Brandenburg, and we'll ride with you, or you pick a place and we'll meet up. I'm on my way to Florida/ Key West Tuesday night, and will probably run into DW6019 somehere, as we used to work together years ago.

Jock · « **Reply #18 on:** December 19, 2004, 07:48:38 PM »

Good Luck and Best Wishes with the new bike!

As with anything as long as you are pleased, that is ALL that is important!

Enjoyed the Ride with two of the bikes today with 58* temps!

Seasons Greetings.

no-rain · « **Reply #19 on:** December 19, 2004, 08:29:24 PM »

ashcraft, when it gets a little warmer I will come over; thanks for the offer. I am looking forward to meeting new people outside of the meteorology/computer programming field. Hanging out with fellow CVO/HD folks will make my day.

Cannibus_Man · « **Reply #20 on:** December 20, 2004, 10:37:02 PM »

i really enjoy the lift and recomend one to everyone,,, go to your local swapmeet or you can order one here http://www.weliftmotorcycles.com/index.html Man i'll say it's much better to stand up n clean the road grime than to try to clean down low

Twolanerider · « **Reply #21 on:** December 20, 2004, 11:55:13 PM »

Know it's been mentioned already but that bike looks really nice. Nice machine. I'm also really looking forward to seeing one of the Fatboys in red. Thinking they're going to be super sharp as well. Hell, they're all nice. Doesn't matter what color it is.

mfgreen · « **Reply #22 on:** December 23, 2004, 01:01:25 PM »

Quote

I've seen a couple Fat boys with hard bags that have looked good.

with regards to the Corbin bags;

"mikefgreenwald@yahoo.com
From:"daytona6@mike-corbin.com" <daytona6@mike-corbin.com> Add to Address BookAdd to Address Book
Subject:Re: WWW Product Request

Thanks for the inquiry. The bags are designed for clearance with the
stockexhaust, and fit most aftermarket units also. Provided the Big Shots
are no higher on the bike you should be fine. Check this out;

http://www.corbin.com/harley/softail/2kstbag.shtml

http://www.corbin.com/harley/softail/Install1_stobag03.jpg

If you have any questions please give me a call.
Bruce

Bruce Kypta
Corbin Saddles, Daytona Sales Center and Warehouse.
777 Main Street, Daytona Beach, Fl., 32118
Toll Free: 1-800-223-4332 EXT. #14
Local: 1-386-258-8191
Fax: 1-386-258-5286

2soaper · « **Reply #23 on:** December 23, 2004, 01:17:31 PM »

I'm not sure you will clear the seat with these bags. I went with the harley hard saddle leather over plastic 53061-00A. I needed to order a kit to extend out the mounts to clear the hard pan stock seat. These (Corbins) look like they would have the same problem I encountered.
Originally I was going to purchase Harley's hard fiberglass bag and have them paint the factory cobalt blue like on my bike. I called the MFG and they said they will not paint the Cobalt Blue custom on the bags. So I checked a local company that said the could match the color, which they said they could. They wanted more for the painting then the 900 for the bags.

Cannibus_Man · « **Reply #24 on:** December 23, 2004, 10:44:45 PM »

ya 2soaper this bike is kinda diffferent for bags. actually im still wondering why the harley catalog says that most of the bags dont fit with the rear axle covers also..
i like the looks of those corbin bags tho,,,,hell if i did get em to fit right with the stock seat i guess i would need to air brush a simulated ground metal look on em ,,
keep the same look across the whole side ,,,those bags have a low rider skirt type look to em ,, really it looks like its gunna run up some$$ for the much needed bags,,
i gotta stay on track tho and get the pipes first

Cannibus_Man · « **Reply #25 on:** December 23, 2004, 11:41:11 PM »

i already got a recall on this bike ,, some others might have alsom depends on where ya live i guess,,, back in mid Nov. they sent me this,,, nuthin like a smog device failure lol

Cannibus_Man · « **Reply #26 on:** December 25, 2004, 10:25:27 PM »

hey yall, i've started using these covers http://www.hottoppers.com/home.html
i was wondering if they are any good , harley has the billet stuff @ 3x the price
i'm juz wondering if i should juz replace em with the billet,, they say at hottoppers that they will replace if they fall off or if the chrome peels,,,,,i did put billet on the rocker box cover tho

mfgreen · « **Reply #27 on:** December 25, 2004, 10:42:10 PM »

Quote

hey yall,

Cannibus_Man · « **Reply #28 on:** December 26, 2004, 02:52:17 AM »

here is a pic of some of the toppers i've put on so far ,, im thinkin i shoulda bought a topper kit ,,, this bike takes alot of 1/4 in socket heads, the front motor mount comes in a kit tho (no price break) 12 bucks lol,, actually im wondering if harley put all the zinc hardware on juz to give us "SE" guys a reason to go to the parts dept. [smiley=laugh.gif]

mfgreen · « **Reply #29 on:** December 26, 2004, 01:07:01 PM »

Quote

here is a pic

reo · « **Reply #30 on:** December 27, 2004, 10:12:58 AM »

Thanks for the heads-up on the toppers website. I was going to approach this avenue when I finished with installing all the chrome upgrades.

Cannibus_Man do you have an estimate of the diffence in piecing out the toppers induvidualy versus buying the kit? I was going to compare these two options with pricing out all the caps from Harley.

The only other concern I had was the toppers look a little different from the caps used on my flstfse, they do look good though. Thanks for the pics......

Cannibus_Man · « **Reply #31 on:** December 27, 2004, 01:01:47 PM »

well, im beggining to think that the kit is more affordable, i went the individual route,
and couldn't get the toppers for the rocker boxes (which i think are included in the set) so i bought the billet rocker box caps from HD @ 4.25 ea.,, x 8,, the 1/4 in socket head caps were runnin .99 cents,, which is the majority of the bike,, i have roughly 40+ of em on it now and some room for a few more i guess. the other caps were runnin 1.49 to 1.89ea. the front motor mount kit (2pcs.) was 12 bucks,, the complete starter kit was 150.00,, if i had a chance to do it again i think i would of bought the kit and pieced in the rest,,, less runnin back n forth to the dealer,,,oh also i think i need to take all the toppers off again and replace the zinc washers with chrome washers..it would look much better [smiley=1syellow1.gif]

Cannibus_Man · « **Reply #32 on:** December 27, 2004, 02:48:52 PM »

i went to the local dealer today,,Laidlaws, they have a red FLSTFSE available,,Man! it's a nice lookin ride, you guys with them ordered picked a real nice one,,
http://adcache.cycletrader.com/5/3/2/77369732.htm

no-rain · « **Reply #33 on:** December 27, 2004, 07:55:15 PM »

Thanks for the information Cannibus_Man [smiley=thumbsup.gif]. I just went ahead and purchased the complete hot toppers softail fatboy 225 pcs kit.

reo · « **Reply #34 on:** December 27, 2004, 11:54:57 PM »

Quote

well, im

Cannibus_Man · « **Reply #35 on:** December 28, 2004, 05:19:31 AM »

good point Reo, i juz found out bout the pressed washer,, when i put the HD billet rocker box caps on they covered completely ,,but actually very few of the hottoppers cover completely,,if the hd covers go over the whole bolt and washer then it would be a better job cause to buy a bolt and washer also would make up any savings..shoot it's hard to get this right the first time [smiley=furious.gif] lol... i did go to my local hardware store and ask for high grade chrome hardware and he had it for a much more reasonable price but the washers are usless with that pressed one on there,,
right now inm lookin at cuttin em off and putting the 1/4 lchrome lock washer on or juz takin em back and shine it all together (juz live with the zinc lol)

no-rain · « **Reply #36 on:** December 28, 2004, 08:32:43 AM »

Cannibus_Man/REO, I will most likely put the chrome bolts on the primary and then put the hot toppers over them and then just replace other single washers with chrome washers. I am going to try to keep the bike consistent with one product. Thanks again for blazing the trail

reo · « **Reply #37 on:** December 28, 2004, 06:54:08 PM »

Thanks for all the imput Cannibus_Man/Rainman, I'm thinking I am going to get a list together once I get the rest of the chrome on my bike and go to my dealer on a 20% day and get the caps I need. I agree with you Rainman in trying to keep the bike looking consistant. I really don't think I have to change all the bolts if I use the HD caps I have used them before, let me know if you guy's find different results.

btw, Rainman I finally got the delux light bar and installed it yesterday taking off the road lamps the dealer installed and it fits perfectly, looking much better with the billet looking bracket.

Another point this thread has helped me out a lot providing much good information but why is it under pictures, we should be putting all this info under the Fat Boy disscussion (FLSTFSE Sreamin' Eagle Fat Boy)

no-rain · « **Reply #38 on:** December 28, 2004, 10:06:02 PM »

(It might help if I read my post before submitting it) Corrected Post

REO, I will start a new thread under Fat Boy discussion with a question about a Chrome product kits.

Cannibus_Man · « **Reply #39 on:** December 29, 2004, 09:20:04 PM »

Reo, Rainman ("SE") Fatboys,,,lol
i put some chrome switch covers on today,,they cost 13 bucks,, it's kinda nerve racking to put em on but worth it ,, did you guys buy a service manual? i bought the softtail service manual today and had to order the cvo supplement which'll cost ya another 38.00,,, this is my first bike so i got alot to learn about these things [smiley=laugh.gif]

no-rain · « **Reply #40 on:** December 29, 2004, 09:28:21 PM »

Those chrome switch covers look great. I have had the normal manual for a while, but was able to pick up the FLSTFSE supplement about a week ago. I do have to say that I was a little disappointed in the supplement. I thought it would have more content, not what I was expecting but it is still nice to look at.

Cannibus_Man · « **Reply #41 on:** January 03, 2005, 11:49:38 PM »

today i put the lifter block covers on ,it's a nice kit and easy to put on [smiley=laugh.gif]

wiseguy · « **Reply #42 on:** January 14, 2005, 09:01:05 PM »

A buddy of mine had the same problem in reguards to the bags not fitting.What he did was when he went touring he put on the second seat and put on a sissy bar and the bags installed pretty good.

Was wondering what the difference would be from your shot guns to the Reinharts.?

I have the stock pipes on mine with the baffles drilled out and i`m thinking maybe getting the rienharts.I just love the looks of them on rio`s bike!

Cannibus_Man · « **Reply #43 on:** January 14, 2005, 09:36:49 PM »

oh ya , Reo's bike is clean with those pipes . killer actually, there are so many different manufacturers of pipes it's too hard to choose from,,personally i'm goin to purchase the V&H big shot staggered pipes ,,i live in santa fe springs, CA and im about 10 minutes from the vance and hines motorcycle center. ive talked to them about the pipes and they said that those pipes are the next best preformance pipes,, to the 2into 1pipes they have to offer, they are claiming to me aprox.11hp from those and slightly less for the big shot stggrd,(the dyno results will tell)...now that harley has a performance chip to accomodate the pipes for 149.00. i no longer need a power commander or race tuner for this set up .. to be honest with ya i really don't know if this performance chip that harley has will accomodate different pipes or what ,, i know that my dealer (laidlaws HD) in baldwin park fully backs the V&H stuff,,hell they even sponsor the screamin' eagle race team,,,prolly in a few weeks i'll be ordering the V&H big shot staggered
from direct parts.com the performance chip from harley and have em put em on and run the dyno ,,,,,,,

nice cage ya have isnt there a viper forums for that tho?

reo · « **Reply #44 on:** January 14, 2005, 11:30:33 PM »

Cannibus_Man, on the picture you posted showing the lifter block covers, I noticed the crancase cover with the Screamin Eagle logo. Is this the cover that came on your bike or did you change it? My bike has a different cover.

Cannibus_Man · « **Reply #45 on:** January 15, 2005, 01:58:31 AM »

ya Reo,i put a different position sensor cover on ,,,

wiseguy · « **Reply #46 on:** January 16, 2005, 02:58:14 PM »

Anyone ever see any pics of the silver one on the net??I havent if you can plz put up a link my neibor is in the market for one now to lol

mfgreen · « **Reply #47 on:** January 16, 2005, 03:52:13 PM »

Quote

Anyone ever see any pics of the silver one on the net??I havent if you can plz put up a link my neibor is in the market for one now to lol

The Platinum Mist and Slate (silver) FLSTFSE can be seen at these links:
http://www.powersportsnetwork.com/powersportsdlr/images/news_072004-17.jpg
http://home.ama-cycle.org/membersonly/magazine/review_dl.asp?id=156

wiseguy · « **Reply #48 on:** January 21, 2005, 07:49:46 PM »

Hey thx NFG !! much appreciated

Quote

Cannibus_Man · « **Reply #49 on:** January 23, 2005, 01:27:21 AM »

Today i put a billet led fuel gauge on to match the fuel cap i had put on a couple of months ago http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448767138&FOLDER%3C%3Efolder_id=2534374309040824&ASSORTMENT%3C%3East_id=2534374309040824&bmUID=1106459752244&bmLocale=en_US
I'd have to say it was relatively easy exept for the fact that you have to get into the speedometer plug [39] and disconnect the yellow/white wire and replace it with a grey wire that connects to the new gauge,,, how many people out there are familliar with
packard metri-pack electrical connectors? Wow! i had a helluva time getting that wire out of the socket,with the metal tang attached also. service manual says use a safety pin and stick it in the end of the plug and roll it around till ya here a snapping noise,,,
says it will loosen ...plus it appears to me that the wire loads in from the front of the plug and locks ..the instruction that came with the gauge has ya either cutting the new grey wire or loading it in from the back of the plug. i ended up cutting and loading it in from the front of the plug, then soldered it & heatshrink..i was also wondering what that grey wire goes to on the speedometer,,they started using it in 2004 fuel injected bikes and up,,anyways if ya have a late edition service manual be sure to check out those packard plugs ,,,,here is a pic of the tank w/gauge

2soaper · « **Reply #50 on:** January 23, 2005, 10:04:24 AM »

I did the Kuryakn, sounds like a similiar install. Needed to get into the speedo also and the gray wire.

Cannibus_Man · « **Reply #51 on:** January 30, 2005, 09:53:57 PM »

Today I managed to put the auxillary light set on , i couldn't get the new style lights
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448767297&FOLDER%3C%3Efolder_id=2534374302290051&ASSORTMENT%3C%3East_id=2534374302290051&bmUID=1107139499935&bmLocale=en_US they told me they are on back order here, so i went with the standard halogen lamp , tommorow my pipes should be here via UPS ,, I'm really lookin forward to having some sound on this beast (not to mention the HP) plus i'm having a problem with getting a ecm chip through harley ,, seems they have several available but none for the flstfse so it looks for now i'll juz go with the power commander

Cannibus_Man · « **Reply #52 on:** February 08, 2005, 01:12:56 AM »

today i put a new windshield on,,I took Reo's advice and bought the standard nostalgic winshield, man o' live i like it !! [smiley=cool3.gif]

Cannibus_Man · « **Reply #53 on:** February 08, 2005, 01:14:12 AM »

another angle

reo · « **Reply #54 on:** February 08, 2005, 06:51:07 AM »

Now you're ready to do some serious riding hu Cann?

Cannibus_Man · « **Reply #55 on:** February 08, 2005, 09:34:07 PM »

yup, just about ready, ive got my pipes now all i need to get is the power commander. once i get that stuff on i'll be ready to go visit my folks new property out in Reno, Nevada
it's about 500 miles from where i live so i'll see how i do... i figure ill go sometime mid to late march, ive got a co-worker friend that juz bought a 2004 duece,, i think he's ready to rumble along for the ride [smiley=7.gif]

hd-dude · « **Reply #56 on:** February 08, 2005, 09:51:13 PM »

Quote

yup, just about ready, ive got my pipes now all i need to get is the power commander. once i get that stuff on i'll be ready to go visit my folks new property out in Reno, Nevada
it's about 500 miles from

Cannibus_Man · « **Reply #57 on:** February 08, 2005, 10:04:02 PM »

i'm in Whittier, Ca.

yellowsedeuce · « **Reply #58 on:** February 09, 2005, 01:52:17 AM »

Quote

hey yall,

Cannibus_Man · « **Reply #59 on:** February 09, 2005, 08:08:08 PM »

kewl yellowseduece,ya there is a bike night at the "Starting Gate" in los alimitos.. across the street from los alimitos horse race track, every Wednsday night, alot of peeps show up for it and the raffle has got as high as 1600 bucks one week..as far as the hot toppers go i never seen em with the double sided tape they juz wedge on the cap screw or bolt ,,or what have you ..they say that they garrantee em not to fall off or free replacement, juz keep the reciepts send in a few claims once in a while lol, i guess i better check to see if i still have em all on , plus a tip they say is to use some clear silicone RTV to help secure them if needed,, good luck and i'll see yas at the starting gate [smiley=laugh.gif]

yellowsedeuce · « **Reply #60 on:** February 09, 2005, 08:32:11 PM »

Cannibus,

I've heard about that from one of the girls we ride with. She rides a pink sporty with ghost flames. We'll probably see you there one of these days!

Yellowsed

Cannibus_Man · « **Reply #61 on:** February 17, 2005, 11:05:41 PM »

today i put the V&H pipes on , i used the power commander along with em, i tried map# m805-198 from the site and it didnt work , tech assistance said to use it as a starting point, i ended up using one from the user upload section #m805-vj038,, i plan on taken er in for a dyno tune this weekend at LAIDLAWS they are a power commander tuning center.. if you have a power commander make sure you enable the accelerator pump utility tool thats a free d/l from the site,, i set mine at 90% sensitivity 15% fuel deliverey and 20% rotation, it made a big difference, it's set according to the riders habits , so im sure i'll be changing it from the standard setting.. [smiley=laugh.gif]

mfgreen · « **Reply #62 on:** February 17, 2005, 11:10:38 PM »

bet those two empties on the bench sure tasted good after it was done. I'll be interested to see the dyno sheet when you finish.
Mike

Cannibus_Man · « **Reply #63 on:** February 17, 2005, 11:18:46 PM »

welp actually i finished the install late last night but today was the first day i rode it since the change ,,Wow! much louder !! i set off a sea of car alarms now when riding down the street..lol and yea the brewski is flowin lol

Cannibus_Man · « **Reply #64 on:** February 20, 2005, 01:31:18 AM »

today i put the bike on the dyno,, @ wide open throttle i'm gettin max power=88.26 and max torque=89.45. perhaps i should of waited for better weather it was rainin all day here in california, i need windshield wipers for my glasses eh he... here is a pic of the dyno results

reo · « **Reply #65 on:** February 20, 2005, 10:13:13 AM »

Quote

i set off a

yellowsedeuce · « **Reply #66 on:** February 23, 2005, 01:25:11 AM »

Cannibus,

the scoot looks great with those Big Shots!

Yellowsed

Cannibus_Man · « **Reply #67 on:** March 03, 2005, 11:23:44 PM »

today i got the chrome starter end cover from Drag specialties p/n#395197. it's a snap to install and fits great! i juz wish the oil line cover got here at the same time

Cannibus_Man · « **Reply #68 on:** March 05, 2005, 10:40:38 PM »

today, the oil line cover came in

Twolanerider · « **Reply #69 on:** March 06, 2005, 02:07:01 AM »

Quote

today, the oil line cover came in

reo · « **Reply #70 on:** March 06, 2005, 07:50:01 AM »

That oil line cover looks great Cann, again thanks for the tip. I like the way the two pics show the before after........reo

Tonys · « **Reply #71 on:** March 06, 2005, 10:09:15 PM »

The covers look great! I didn't know about the oil line one either.

[smiley=1syellow1.gif] Weather update: sunny and 70-75 for the next week!
YESSSSSS! [smiley=1syellow1.gif]

Cannibus_Man · « **Reply #72 on:** March 19, 2005, 04:58:22 PM »

i saw this bike on cycletrader.com and noticed the chrome neck cover.I was thinkin mabye puttin one on the SEFB http://www.kuryakyn.com/products.asp?bn=harley&ci=3303 whadya think? too much chrome or a good accessory [smiley=laugh.gif]

spydglide · « **Reply #73 on:** March 19, 2005, 05:05:50 PM »

"too much chrome"..........doesn't compute. [smiley=speechless.gif]

ccr · « **Reply #74 on:** March 19, 2005, 05:54:35 PM »

Hi Spydglide, I said Hi to Mr Waugh for you today and he said you have been too long away and for you to hurry back for a visit. I agree with you;
[list bull-redcheck]

is there really too much chrome,
too much power,
too much speed,
too many cvo bikes,
too many people having fun
too much of a good thing?

What is Too Much, I ask? [smiley=nixweiss.gif]

Tonys · « **Reply #75 on:** March 20, 2005, 01:31:06 AM »

Can't have too much chrome...besides its easier to clean

Cannibus_Man · « **Reply #76 on:** March 20, 2005, 02:45:35 AM »

I went ahead and put a inner primary cover http://www.kuryakyn.com/products.asp?bn=harley&ci=2374 instead of changing the original one out. i like the raised look even tho the braket that attaches it near the swing arm is kinda cheesey

Cannibus_Man · « **Reply #77 on:** March 20, 2005, 03:45:47 AM »

here is the reason i plan on putting the cover on. ithink i'll order the cover on monday

Twolanerider · « **Reply #78 on:** March 20, 2005, 12:58:48 PM »

Quote

here is the reason i plan on putting the cover on. ithink i'll order the cover

BadAss2 · « **Reply #79 on:** March 20, 2005, 11:14:41 PM »

Cannibus, love the inner primary...looks good. The tree cover is nice, but I'd wish it covered more. Here's mine.

Cannibus_Man · « **Reply #80 on:** March 20, 2005, 11:37:58 PM »

is that this part

BadAss2 · « **Reply #81 on:** March 21, 2005, 07:40:34 PM »

Mine is the Harley D cover for the touring models. Don't know what it is for the FLSTF's. Can't look it up because a buddy borrowed my Harley D parts catalogue to start paying his Harley tax on the new Heratige Softtail he just brought home. Got a 95 kit put in to keep up to me. Man this summer... when it comes... is going to be some awesome cruising. A FLHTSC2, a Heritage soft tail, a T Sport and a Road King.

Cannibus_Man · « **Reply #82 on:** March 21, 2005, 11:50:31 PM »

sounds like a great group of bikes to cruize with Badass2. [smiley=xyxthumbs.gif]

I managed to find the cover i was after @LAHarley in paramount. so i went ahead and put it on. man i hate taking the throttle apart. stretchin those cables back onto the grip sux..also the part is listed that it didn't fit the fatboy because of interference but i couldn't find any...it went on good.

Tonys · « **Reply #83 on:** March 22, 2005, 01:17:25 AM »

That looks great, Can man...sigh one more thing to add to my list [smiley=laugh.gif]

reo · « **Reply #84 on:** March 22, 2005, 07:36:29 PM »

Quote

I managed to find the cover i was after

Cannibus_Man · « **Reply #85 on:** March 22, 2005, 08:31:11 PM »

Reo, this

BadAss2 · « **Reply #86 on:** March 22, 2005, 10:39:12 PM »

Much better fill then on mine. Nice piece of chrome.

yellowsedeuce · « **Reply #87 on:** March 23, 2005, 01:46:17 AM »

Quote

Reo, this

Cannibus_Man · « **Reply #88 on:** March 23, 2005, 10:14:04 PM »

Quote

Your scoot's looking sweeter by the day.

Cannibus_Man · « **Reply #89 on:** May 23, 2005, 06:44:10 PM »

BUMMER! i lost all the pictures i posted [smiley=furious.gif] oh well....this site is great
regaurdless..I guess this just means i need to do more to the bike to post more pictures [smiley=laugh.gif]

Cannibus_Man · « **Reply #90 on:** June 17, 2005, 01:21:35 AM »

one more pic

Cannibus_Man · « **Reply #91 on:** June 17, 2005, 01:50:29 AM »

Today i went and changed out the pivot bolt covers and front axel nut covers with the Aluminator series covers.I like em better, I juz can't get eough of that bar n' shield emblem [smiley=laugh.gif]

Cannibus_Man · « **Reply #92 on:** June 17, 2005, 01:54:58 AM »

I also made my bags easily removable and just have a acorn nut showing when the bags are removed, all i gotta do is use a 9/16 wrench and crack the 2 acorn nuts loose and they are off,,takes all but a minute

2soaper · « **Reply #93 on:** June 17, 2005, 09:37:43 AM »

Looking sweet Pot man!

nhFLSTFSE · « **Reply #94 on:** June 17, 2005, 06:42:40 PM »

Cannibus
I noticed your pipes..
Does your home state have a max noise level? New Hampshire has a limit of 106. Any idea what yours are?
Thanks

Cannibus_Man · « **Reply #95 on:** June 17, 2005, 08:07:27 PM »

Quote

Cannibus
I noticed your pipes..
Does your home state have a max noise level?

2soaper · « **Reply #96 on:** June 17, 2005, 10:32:19 PM »

Where'd you get the seat holder cover? In the pic's its a bit hard to see what it is....

Cannibus_Man · « **Reply #97 on:** June 18, 2005, 01:27:29 AM »

Quote

Where'd you get the seat holder cover?

Mrs Red Hot · « **Reply #98 on:** June 24, 2005, 10:05:38 AM »

Quote

I also made my bags easily removable

Cannibus_Man · « **Reply #99 on:** June 24, 2005, 08:46:47 PM »

Quote

Want to know what bags did you go with and what if anything did you have to do on the fender struts to use the bags. Just looking at mine you would think there would have to be some changes made or the turn signals moved to make a pair of saddlebags fit. Might want to add some latter, but want to be able to run without them when I choose.

Tonys · « **Reply #100 on:** June 25, 2005, 01:31:59 AM »

Quote

Want to know what bags did you go with and what if anything did you have to do on the fender struts to use the bags. Just looking at mine you would think there would have to be some changes made or the turn signals moved to make a pair of saddlebags fit. Might want to add some latter, but want to be able to run without them when I choose.

Mrs Red Hot · « **Reply #101 on:** June 27, 2005, 11:32:01 AM »

Quote

hi Mrs.RH.
I used

Mrs Red Hot · « **Reply #102 on:** June 27, 2005, 11:36:18 AM »

Quote

Another option if you want larger bags is http://www.leatherworksinc.com/ great quality, heavier leather, several styles, sizes and shapes. You can attach them with ghost brackets or E-Z brackets so they will be removable.

Thanks a bunch, at least now I know there are several choices out there. Do the ghost brackets and E-Z brackets let you leave the nice fender strut and only change out the bolts or do you have to change the strut too. I have looked at their products but it doesn't give enough info on what all gets changed out. [smiley=confused5.gif] Sandy

Coolbreeze · « **Reply #103 on:** June 27, 2005, 12:33:44 PM »

I don't know about the E-Z Brackets, but the ghost brackets only put a different bolt in the strut. The strut remains the same and stud on the bolt that takes the bracket itself is very discreet and almost unnoticable. (I polished the slot on my wife's bike and it is very stylish)

Tonys · « **Reply #104 on:** June 27, 2005, 11:27:53 PM »

Quote

Thanks a bunch, at least now I know there are several choices out there. Do the ghost brackets and E-Z brackets let you leave the nice fender strut and only change out the bolts or do you have to change the strut too. I have looked at their products but it doesn't give enough info on what all gets changed out.

Mrs Red Hot · « **Reply #105 on:** June 28, 2005, 05:01:57 PM »

Quote

Both use the struts on the bike..just

Cannibus_Man · « **Reply #106 on:** July 02, 2005, 05:20:34 PM »

Quote

Where'd you get the seat holder cover?

sefatboyscott · « **Reply #107 on:** September 23, 2005, 01:01:50 AM »

I am guessing most who asked have seen the platinum/slate fatboy in one of the other threads by now, if not here is a pic of mine just in case.

Cannibus_Man · « **Reply #108 on:** February 16, 2006, 12:46:10 AM »

Well,It's been a while since i've posted.so i thought I'd drop in and say hi

my bike has been great ! i juz turned 18,000 on it and all that has happened is the rocker box covers started to seep..other than that I can't complain

here is a picture of me in PineValley Ca.

Author Topic: SEFLSTF (Read 21351 times)

mfgreen

mfgreen

mfgreen

mfgreen

mfgreen

mfgreen