Topic: solo seat back (Read 28681 times)

xpanther · « **on:** October 23, 2011, 01:38:01 AM »

i had this made for my convertable. it attaches to the two thumb screws that hold the seat. I used the pad and chrome piece from the sissy bar. i'll try to add a picture.

xpanther · « **Reply #1 on:** October 23, 2011, 01:43:58 AM »

another Pict

Mr. Warlock · « **Reply #2 on:** October 23, 2011, 08:21:27 AM »

Nice job. Is it functional or did you do it mainly for looks? I'll bet it's a Ba$t@rd to get at those thumb screws now.

xpanther · « **Reply #3 on:** October 23, 2011, 02:47:38 PM »

It is functional. works great!! The thumb screws are hard to reach so i just take the pad off and then you can get to them.

ozarke · « **Reply #4 on:** October 23, 2011, 08:06:17 PM »

NICE...Sure looks good.

Could you post a picture of the part the you made without the pad on it?

Is your pad solid enough to lean against it?

I have been trying to come up with a similar approach, but so far it has not been stable enough to lean against it without putting to much force on the nuts and maybe scratching the fender.

xpanther · « **Reply #5 on:** October 24, 2011, 03:55:42 PM »

It sits on the seat pan so it doesn't touch the paint. it is very sturdy and you can lean on it hard.

ozarke · « **Reply #6 on:** October 24, 2011, 09:24:34 PM »

Thanks for the photo. Will give it a go this winter.

n2mycvo · « **Reply #7 on:** October 24, 2011, 09:56:14 PM »

May I ask who made it for you? Also, can you tell me where you purchased the hardware pictured in the 3rd photo? I would love to have one made as I have a Mustang seat with back rest on another bike. Thanks.

xpanther · « **Reply #8 on:** October 25, 2011, 09:57:25 AM »

I'm not sure what hardware your talking about? The mount I had made by a local welder(total cost for everything $35.00). I mocked it up in cardboard and had him copy it. the rest of the hardware (pad and chrome mounting bar) came from the sissy bar.

n2mycvo · « **Reply #9 on:** October 25, 2011, 10:10:45 AM »

The 3rd photo depicting a black metal component which I assume is the backrest that the pad is affixed to. I call it hardware but I guess that is the wrong term. I wonder where you got it from.

xpanther · « **Reply #10 on:** October 25, 2011, 04:32:48 PM »

I had it made by a local welder.

n2mycvo · « **Reply #11 on:** October 25, 2011, 07:02:49 PM »

Thank you. I will have to consider whether I need one.

sjr · « **Reply #12 on:** November 26, 2011, 10:08:45 PM »

Would you consider having another made for me? I will send you the money first of course. Would love to get that setup on mine.

n2mycvo · « **Reply #13 on:** November 26, 2011, 11:56:13 PM »

I am also interested. Like SJR, I too, would be willing to send you the money in advance.

jjohn581 · « **Reply #14 on:** November 28, 2011, 03:05:42 PM »

That does look great and I also would like to get one. I can see what you mean about taking the pad off first to get to the thumbscrews.

sjr · « **Reply #15 on:** November 29, 2011, 04:33:08 PM »

I have the same bike, 2011 in Maple
any other modifications?
I only have 12 miles on mine...picked it up yesterday

xpanther · « **Reply #16 on:** November 29, 2011, 06:48:31 PM »

I have also added the 2012 windshield and GPS. the windshield that came on the 2011 is just about useless. I was getting a lot of whistling in my ears and turbulence in my face. The 2012 is much better.

sjr · « **Reply #17 on:** November 30, 2011, 07:38:47 PM »

I was thinking of doing that too
where did you get it?
how much$ ?

Willie D · « **Reply #18 on:** November 30, 2011, 10:16:32 PM »

I will be trailering my 2012 FLSTSE3 home tomorrow, as they put a ton or two of road salt on the roads today. but at least it will be home.

Satin Pewter - the pictures do NOT do it justice.

JMHO

n2mycvo · « **Reply #19 on:** December 01, 2011, 08:02:29 PM »

Very Nice! Congrats on your new ConV.

Willie D · « **Reply #20 on:** December 02, 2011, 06:31:24 PM »

Quote from: n2mycvo on December 01, 2011, 08:02:29 PM

Very Nice! Congrats on your new ConV.

Took it out today after installing the Gerbings wireing harness, 34 degrees, but the raods were dry. Only a 35 miler, but it ride nice, I like the Mini Apes, and the 110 SE motor. Rain and snow in the forecast the rest of the week, so now it will sit with the cover and battery tender till march or when the roads are SALT free.

WD

xpanther · « **Reply #21 on:** December 02, 2011, 07:32:12 PM »

You get it at Harley. Cost about $1400.00 including the GPS

spydglide · « **Reply #22 on:** December 02, 2011, 07:42:47 PM »

Quote from: Willie D on December 02, 2011, 06:31:24 PM

Took it out today after installing the Gerbings wireing harness, 34 degrees, but the raods were dry. Only a 35 miler, but it ride nice, I like the Mini Apes, and the 110 SE motor. Rain and snow in the forecast the rest of the week, so now it will sit with the cover and battery tender till march or when the roads are SALT free.

WD

At least you got that short 35 mile jaunt in.....that scooter looks like it fits you.

spyder

Willie D · « **Reply #23 on:** December 03, 2011, 09:39:13 AM »

Quote from: spydglide on December 02, 2011, 07:42:47 PM

At least you got that short 35 mile jaunt in.....that scooter looks like it fits you. spyder

Thx Spy - it really does. I have enjoyed my previous two CVO's and this one is not disappointing.

will be adding 62823-08B flush mount fuel gauge/cap and have all winter to consider which exhust to buy. Most likely it will be a 2-1.
I was happy with the Bassani RR Long with the quiet baffle.

sjr · « **Reply #24 on:** December 03, 2011, 02:29:31 PM »

I will be talking to some fabrication shops near me to get one of these made for my solo seat.
What gauge steel is yours made of and do you know the angle of the bend?

xpanther · « **Reply #25 on:** December 03, 2011, 02:39:29 PM »

I don't know the gauge but it is 1/8" thick. the lean angle depends on your height and arm length. I took of the sissy bar pad and took it to the welder and sat on the bike with the pad where I wanted it and had him determine the angle.

ozarke · « **Reply #26 on:** December 03, 2011, 10:23:01 PM »

I am working on my version of the seat back. The angle from the seat to straight up is about 120 degrees.

It will be awhile but when I get mine finished, I will post pictures.

n2mycvo · « **Reply #27 on:** December 05, 2011, 09:59:42 PM »

Thank you Xpanther for the template.

I will wait to see what Ozarke does as well.

I cannot wait to compare both of the versions.

jjohn581 · « **Reply #28 on:** December 06, 2011, 12:33:58 PM »

Ozarke where are you getting yours done at? I think you may be in my area and they could do 2.

sjr · « **Reply #29 on:** December 06, 2011, 06:26:42 PM »

I am having this bracket made as we speak. If it turns out well, I can have them made in quantity for any other "solo" riders that want one.

will let you know in a day or so.

ozarke · « **Reply #30 on:** December 07, 2011, 12:50:38 PM »

I am making my version myself. I now have the plans made but have not started the process yet. Not in a big hurry as it is cold here now. Will post pictures as soon as I have it done.

jjohn, yes I live in Springfield, Mo area. Drop me a pm with your phone number, if you wish to talk or assist in process.

sjr · « **Reply #31 on:** December 07, 2011, 09:46:02 PM »

OK.....Here is mine....

sjr · « **Reply #32 on:** December 07, 2011, 09:46:56 PM »

Another

sjr · « **Reply #33 on:** December 07, 2011, 09:47:45 PM »

One More...

ozarke · « **Reply #34 on:** December 08, 2011, 10:28:02 AM »

sjr: That looks good.

sjr · « **Reply #35 on:** December 08, 2011, 10:34:59 AM »

I could not have done it this quick or this good without the help of Xpanther.

Thank you, Xpanther

xpanther · « **Reply #36 on:** December 08, 2011, 01:23:26 PM »

Your welcome. Have you tried it out yet? I love mine.

jjohn581 · « **Reply #37 on:** December 08, 2011, 04:22:45 PM »

Ozarke, am sending you a pm with my info since we are in the same area.

That really looks good sjr and I have to get one now!

sjr · « **Reply #38 on:** December 12, 2011, 07:06:00 PM »

Just a thought......I found someone to make the seat bracket for me and he has the CAD drawing to allow him to now make copies of the bracket. I can have them made with or without the mounting holes drilled. Probably a small price difference without the holes.
I'm trying to see if there is any demand for this part. The fabricator would rather make a run of 50 pieces rather than one at a time (understandable)
I think I can get them made for less than $60.00 each in heavy gauge steel that will not bend as you lean on it.

Anyone who is interested, let me know and we will see if it is feasible.

Lever · « **Reply #39 on:** December 12, 2011, 08:17:53 PM »

I'm intrested

cvoleo · « **Reply #40 on:** December 13, 2011, 04:04:37 PM »

Quote from: sjr on December 06, 2011, 06:26:42 PM

I am having this bracket made as we speak. If it turns out well, I can have them made in quantity for any other "solo" riders that want one.

will let you know in a day or so.

I'm interested.

cvoleo · « **Reply #41 on:** December 13, 2011, 04:16:41 PM »

BTW I swore I would not make any modifications to this bike......I can't believe I'm considering it!

spydglide · « **Reply #42 on:** December 13, 2011, 05:00:08 PM »

Quote from: cvoleo on December 13, 2011, 04:16:41 PM

BTW I swore I would not make any modifications to this bike......I can't believe I'm considering it!

A moment of losing touch with what's important in the whole scheme of things..

...har. :huepfenlol2:spyder

n2mycvo · « **Reply #43 on:** December 13, 2011, 10:07:36 PM »

I am interested as well.

I wonder how different it is from Xpanther's solo seat.

sjr · « **Reply #44 on:** December 14, 2011, 07:24:37 AM »

It is actually the same as Xpanther. He supplied the template.

bosshogg69 · « **Reply #45 on:** December 14, 2011, 10:10:22 AM »

My wife is interested and so is a buddies wife. If Mama's happy I'm happy!!

sjr · « **Reply #46 on:** December 14, 2011, 10:18:01 AM »

It sounds like maybe 5 or 6 interested so far. If a few more people respond, I will get them made up.

BuckBaker · « **Reply #47 on:** December 14, 2011, 05:35:52 PM »

I'll buy 1 for a buddy that just bought a 2011 .

ozarke · « **Reply #48 on:** December 16, 2011, 02:31:35 PM »

I was considering buying one, but found that I the 2010 model has the emblem welded on the sissy bar. 2011, 2012 is an insert and can be used on the solo seat back as shown. The cost is about $50 for the emblem.

Sorry, I will continue my exploration of prototypes.

Lever · « **Reply #49 on:** December 18, 2011, 09:13:30 PM »

I'm ready to send money for this

paconico1992 · « **Reply #50 on:** December 22, 2011, 08:26:28 PM »

count me in for one

sjr · « **Reply #51 on:** December 23, 2011, 08:42:56 AM »

First off, I want to wish everyone a happy holiday season, whichever holiday you celebrate and a healthy & safe 2012.
I will need a final count from all who are interested in ordering the part so I can tell the shop how many to produce...I will probably have him do a few extras.

If it is not against the rules, you can send the total cost which will include shipping (to 48 states) $68.00

to......BETTER-WAY PRODUCTS
PO BOX 991
BENSALEM, PA. 19020
ATTENTION- STEVE

Will probably be sending out towards the end of Jan.

paconico1992 · « **Reply #52 on:** December 23, 2011, 09:12:55 AM »

I'll send a check this weekend for one

Can't wait

paconico1992 · « **Reply #53 on:** December 23, 2011, 09:21:24 AM »

Question
will these be powder coated or bare stock metal &
Is it possible to find out if your guy can get mine chromed & how much more $

Thanks,

Paconico

Lever · « **Reply #54 on:** December 23, 2011, 08:44:08 PM »

x2 on the ques ..if chrome is a option I'm down for chrome also

bosshogg69 · « **Reply #55 on:** December 27, 2011, 10:52:55 AM »

Sending my check today.

Lever · « **Reply #56 on:** December 27, 2011, 04:34:19 PM »

check in mail

sjr · « **Reply #57 on:** December 29, 2011, 06:14:56 PM »

The Fabricator is working on the seatbacks now.
Not sure yet about the chroming though.
I know they can be either painted with a black hammer finish or powder coated.
If you guys want chrome maybe I will send you the bare steel and you can get it chromed locally.

Lever · « **Reply #58 on:** December 29, 2011, 07:10:43 PM »

don't worried about chroming send mine powder coated thanks john

n2mycvo · « **Reply #59 on:** December 30, 2011, 08:58:17 PM »

I will get my chromed locally but how do we adjust the angle to fit us?

paconico1992 · « **Reply #60 on:** December 31, 2011, 10:59:54 PM »

I'll got mine chromed locally

Rich

xpanther · « **Reply #61 on:** December 31, 2011, 11:03:40 PM »

Show us some pictures.

sjr · « **Reply #62 on:** January 01, 2012, 12:33:21 PM »

My pictures are on the third page of this thread

xpanther · « **Reply #63 on:** January 01, 2012, 04:14:01 PM »

Sorry, I was talking to Rich. I would like to see his chromed seat back.

sjr · « **Reply #64 on:** January 06, 2012, 01:12:12 PM »

To all of the Convertible owners who ordered a solo seat-back bracket.......status update

The brackets have been produced and are on the way to be powder-coated.

I may have them ready for shipping by the 13th

Lever · « **Reply #65 on:** January 06, 2012, 01:51:16 PM »

thanks for the update

Lever · « **Reply #66 on:** January 18, 2012, 06:56:43 PM »

have they shipped out ?

Jasray · « **Reply #67 on:** January 18, 2012, 09:48:40 PM »

SJR - Can I still get in on this deal???

sjr · « **Reply #68 on:** January 20, 2012, 08:22:39 PM »

A bit of a slow-up at the powder-coater. I should be able to get the brackets early next week and ship them out to you guys the same day. I had 10 made so I still have a couple more available.

Lever · « **Reply #69 on:** January 20, 2012, 08:30:08 PM »

thanks for the update

sjr · « **Reply #70 on:** January 25, 2012, 12:49:43 PM »

Good News!!!

Brackets all shipped out to you guys yesterday. I screwed up a bit on the shipping. The brackets and bubble wrap and box were a lot heavier than I thought and UPS seems to have raised the rates.

I have a few extra brackets avail, but I have to get $75.00 for any future orders (shipping included)

Hope you guys like the Brackets.

paconico1992 · « **Reply #71 on:** January 25, 2012, 03:41:29 PM »

Great news

Lever · « **Reply #72 on:** January 25, 2012, 04:54:36 PM »

n2mycvo · « **Reply #73 on:** January 26, 2012, 08:41:07 AM »

Thank you for making it possible for us to purchase the solo seat bracket. Please let me know how much more money you need to make you whole and I will send you the difference. Thanks again.

Mike M · « **Reply #74 on:** January 26, 2012, 12:05:44 PM »

Thank you so very much for doing this!

Mike

sjr · « **Reply #75 on:** January 26, 2012, 06:37:25 PM »

No need to send any more money for those who already paid, (very nice offer though)

Any new orders are $75

Lever · « **Reply #76 on:** January 27, 2012, 02:06:16 PM »

just got my bracket today thanks look good

n2mycvo · « **Reply #77 on:** January 29, 2012, 06:59:11 PM »

Received mine. Thank you so very much for taking the time to make this happen for your fellow ConV owners.

sjr · « **Reply #78 on:** January 30, 2012, 11:20:20 AM »

Let's see some pictures after you install them.

jjohn581 · « **Reply #79 on:** January 30, 2012, 12:36:17 PM »

I have been off the internet for awhile and am just catching up with this forum. If there are any brackets left I will order one, just let me know where to send the check. Thanks

jjohn581 · « **Reply #80 on:** January 31, 2012, 12:21:45 PM »

Duh - Thanks for sending me a message on where to send the check......I guess I should have looked back in the messages. Look forward to receiving the bracket.

Jasray · « **Reply #81 on:** January 31, 2012, 02:08:12 PM »

do you still have some left, and can I send payment via paypal?

JB

sjr · « **Reply #82 on:** January 31, 2012, 02:52:21 PM »

All of the seat brackets are spoken for.
If more people are interested, I can get another 10 made.

So far, I have 1 person interested, if 3 or 4 more are, I will get another batch made up

Jasray · « **Reply #83 on:** January 31, 2012, 11:12:55 PM »

I will send you a PM so you can notify me when you get your next batch in.

xpanther · « **Reply #84 on:** March 18, 2012, 09:57:20 PM »

Does anyone have a picture of there seat back bracket in chrome?

Lever · « **Reply #85 on:** March 18, 2012, 10:43:10 PM »

as soon as i get my bike back i will post pics ... my Indy and i did a Lil modifying to the bracket before sending off to chromer

xpanther · « **Reply #86 on:** March 19, 2012, 11:17:04 AM »

Does anyone have a picture of a chrome seat bracket installed? I would like to see what it look like.

Jasray · « **Reply #87 on:** March 19, 2012, 12:12:57 PM »

SJR, did you ever get more of these made up for selling?

JB

sjr · « **Reply #88 on:** March 21, 2012, 12:08:19 PM »

Hi Guys....It looks like two more people are interested in the solo seat backrest bracket. I need to get them made in minimum lots of 10.
So if anyone else is interested (price is still $75), let me know and I will have another batch made.

Thanks,
SJR

mn.cvo · « **Reply #89 on:** March 21, 2012, 04:46:44 PM »

Quote from: sjr on March 21, 2012, 12:08:19 PM

Hi Guys....It looks like two more people are interested in the solo seat backrest bracket. I need to get them made in minimum lots of 10.
So if anyone else is interested (price is still $75), let me know and I will have another batch made.

Thanks,
SJR

I hope I'm not one of those two. I just mailed my money to you for what you said was your last one on hand. You should have no problem getting another group together. Anyone with a softail could use this not just the CVO. Can't wait for it to arrive.

Lever · « **Reply #90 on:** March 25, 2012, 09:54:31 PM »

here are some pics of the brackett chrome

http://s209.photobucket.com/albums/bb296/Lever03/#!cpZZ1QQtppZZ12

and fan on the oil cooler

mn.cvo · « **Reply #91 on:** March 29, 2012, 06:23:13 PM »

I just received my solo seat bracket from SJR today and decided I don't want to use it. I never put it on the bike and will sell for $50, mailed to your door. It is unpainted, so you can select your own color. Send me a PM.

item has been SOLD..

Lever · « **Reply #92 on:** March 31, 2012, 08:13:55 PM »

i think to chrome my brackett was aprox between 50.00 and 70.00 dollars

Musher Mark · « **Reply #93 on:** April 02, 2012, 05:28:43 PM »

Very nice!

sjr · « **Reply #94 on:** May 22, 2012, 01:05:14 PM »

Hello Fellow Convertible Owners,
I have gotten a few private emails from some owners wishing to purchase a solo seat back bracket.
I had these made up before and sold them all. I can't get less than 10 made at one time, so I need anyone who is interested to reply to me here.
If more than 5 or 6 replies come in, I will have another batch made.
probably will take about 2 weeks to get them ready to ship. Price is still $75.
Let me know, Thanks

sjr · « **Reply #95 on:** May 22, 2012, 01:06:43 PM »

Another View

ejvette · « **Reply #96 on:** May 22, 2012, 01:52:59 PM »

I want one ! Not powder coated I'm going to have it chromed

Jasray · « **Reply #97 on:** May 23, 2012, 02:26:17 AM »

SJR,

What finish will be on the bracket (polished/chrome/brushed)?

sjr · « **Reply #98 on:** May 23, 2012, 03:09:49 PM »

Powder Coated flat black

ejvette · « **Reply #99 on:** June 01, 2012, 11:24:18 AM »

Some of you old guys with bad backs like me must want 1 of these !

Jim Davidson · « **Reply #100 on:** August 12, 2013, 11:32:53 PM »

Sir:

I would like to purchase one of the backrest plates. Are you still doing this?

Thanks,

Jim Davidson
in Illinois
enufdogs@comcast.net

Hey, a member answered the call and I pick up a chrome version Friday!

TxDrifter · « **Reply #101 on:** September 10, 2013, 01:13:31 PM »

Are any of these still available? If not, let me know when the next batch comes around as I would like one. I like riding with the pillion off, but it does lose some support in the low back area when you remove it.

JQCVO · « **Reply #102 on:** September 16, 2013, 06:53:26 PM »

SJR,

I'm interested as well. At looks like two other guys are interested (August/September replies) so that would make z3 orders.

JQCVO

Sk8convict · « **Reply #103 on:** September 24, 2013, 02:59:55 PM »

I'm interested in buying a bracket. Or Even if someone could send me the pattern that woul be cool.
Thanks

Willie D · « **Reply #104 on:** October 21, 2013, 07:04:39 PM »

I would be interested too. After 2 years and 20k - the Old back needs a little help.
Still love the bike -

Wm.D.Davidson Jr.
Portage, MI 49024

I do have PP

Jasray · « **Reply #105 on:** October 22, 2013, 12:47:45 AM »

Put me down for one as well (powder coat) . PM me when you have them available.

JB

Charlie · « **Reply #106 on:** October 22, 2013, 09:32:07 PM »

Put me down for one in chrome,

sjr · « **Reply #107 on:** October 28, 2013, 03:57:11 PM »

How many of you are interested in obtaining the solo seat back?
I spoke to the fabricator about making another set and it looks like we are at about $85.00 each, but I need to get a bunch produced to get that price.
Let me know who is interested.

Thanks

Willie D · « **Reply #108 on:** October 29, 2013, 06:33:20 PM »

I'm in for one

2010Convertable · « **Reply #109 on:** November 12, 2013, 04:51:16 PM »

Mark me down for one if your still making them...
Thanks and regards,
Fred

Willie D · « **Reply #110 on:** November 13, 2013, 12:30:40 PM »

What is considered a "BUNCH" ?

Quote from: sjr on October 28, 2013, 03:57:11 PM

How many of you are interested in obtaining the solo seat back?
I spoke to the fabricator about making another set and it looks like we are at about $85.00 each, but I need to get a bunch produced to get that price.
Let me know who is interested.

Thanks

PaulasCVO · « **Reply #111 on:** February 14, 2014, 02:58:52 PM »

Quote from: sjr on October 28, 2013, 03:57:11 PM

How many of you are interested in obtaining the solo seat back?
I spoke to the fabricator about making another set and it looks like we are at about $85.00 each, but I need to get a bunch produced to get that price.
Let me know who is interested.

Thanks

I would be interested in one if you order more!

sjr · « **Reply #112 on:** February 14, 2014, 05:23:31 PM »

I would need to order 25 at least,,,not there yet

Jim Davidson · « **Reply #113 on:** February 15, 2014, 09:32:20 AM »

Have a chrome one that I don't need- bought a different seat. Includes two detachable seat hardware fasteners 51676-97A for attachment to your CVO sissy bar. $OLD TO PAULA. Reply here or email me at enufdogs@comcast.net in Illinois. See earlier post in thread- bought from "LEVER" last year.

FADBOY · « **Reply #114 on:** May 14, 2014, 03:32:13 AM »

Hi is it possible to get the cad drawing as I have my own machine shop in the uk

12Vert · « **Reply #115 on:** May 17, 2014, 08:37:41 AM »

The solo backrest looks like a great addition. I am interested in a chrome or black bracket - any color for that matter.

-Does anyone have one that they want to part with?
-Would anyone have an electronic template and I will have a local shop make me one (slim chance but I figured it doesn't hurt to ask)?

Going on 2 sizable rides this summer, would be a nice to have.

Anyone....anyone?

Mrs C · « **Reply #116 on:** May 17, 2014, 06:00:13 PM »

In Canada! Would love to have a backrest on my 12 CVO. I can't find one

Willie D · « **Reply #117 on:** May 25, 2014, 09:45:23 AM »

:nixweiss:Anyone have one they want to part with ?

Still interested in one for my 2012

FADBOY · « **Reply #118 on:** June 24, 2014, 04:47:57 AM »

I just purchased this off the shelf from Bestem.

Mandrew13 · « **Reply #119 on:** June 24, 2014, 08:44:31 AM »

Fadboy- which model did you purchase? How is the fit? Thanks.

FADBOY · « **Reply #120 on:** June 24, 2014, 08:52:08 AM »

I bought the softail deluxe (with slot) just in case I had to bend it slightly.

I have not tried it yet but will let you know later how it fits

http://www.bestemusa.com/Harley-Davidson-Softail-Deluxe-07-11-Driver-Backrest-_p_747.html

FADBOY · « **Reply #121 on:** June 24, 2014, 02:44:12 PM »

Did have to bend it back slightly on the seat location screws but it was ok and the chrome did not crack so in all it was a good deal

FADBOY · « **Reply #122 on:** June 24, 2014, 04:02:03 PM »

Another pic

jjohn581 · « **Reply #123 on:** June 25, 2014, 11:26:10 PM »

Finally got the mounting hardware for the Corbin seat I got off EBay and will sell my backrest with the bracket I bought from here. This is on a 2011 convertible. Not only do I have the backrest but I also bought the pad #54393-11 and 2 fender screws #51676-97A. These make it easy to take the pad off when mounting the bracket. This is in brand new condition since I ended up using my luggage as a backrest on the longer trips. My cost for this was $270 will let it go for $170 shipped.

jjohn581 · « **Reply #124 on:** June 25, 2014, 11:28:06 PM »

Picture of rear

Willie D · « **Reply #125 on:** July 05, 2014, 10:36:11 PM »

Crap - I was just in Springfield for the state rally !
just my luck

jjohn581 · « **Reply #126 on:** July 08, 2014, 12:39:10 PM »

Still got it if you are interested. Let it go for $150 shipped to US.

jjohn581 · « **Reply #127 on:** July 22, 2014, 10:26:41 AM »

Backrest has been sold.

solomon753 · « **Reply #128 on:** April 17, 2015, 08:10:15 AM »

Quote from: jjohn581 on July 22, 2014, 10:26:41 AM

Backrest has been sold.

Do you know where I can find another one?

TomC · « **Reply #129 on:** April 27, 2015, 07:55:06 AM »

Any more of the brackets by Lever available? New here and would sure like to have one.

Lever · « **Reply #130 on:** April 27, 2015, 02:08:12 PM »

Tom I don't make the brackets sorry... had one however but I sold it to a fellow member here

Author Topic: solo seat back (Read 28681 times)