Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ChopperPilot]

Will send pics once I have it installed, maybe some pics of the stages of installation too.  Not going to happen for a little bit, in the middle of a snow storm and temps that are expected to dip to -11 and highs of 1 or 2 for the next couple days.

[lennyj]

Will it work just as a break light?  I don't prefer the turn signal option. Thanks!  A post of the directions would be appreciated.

[24v]

Will it work just as a break light?  I don't prefer the turn signal option. Thanks!  A post of the directions would be appreciated.

Yes it will.  If you want to wire it to be off when running and only come on for the brake light then you can just buy the light.  If you want it to be on when running, and brighter when brakes are applied, you will need a little harness they sell for that.

As for the instructions, simple.  You tap into 2 wires under your seat and stick the light to the inside of the fender with the included double stick tape.

[lennyj]

Hardest part was removing the reflector. Nice product. Definitely suggest mounting on the lip.

[ChopperPilot]

Finally, home long enough to put on the Chrome Glow LED lights.
Installed so they would function as Run/Brake/Turn.

Took the fender off to take the reflector off and made the routing of the wires easy.

Much cleaner look.  If I need to put a reflector back on the back of the bike, I will research a different solution.

[ChopperPilot]

Another shot with sissy bar and passenger seat setup for my better half.

[dahsen]

Nice !!!   

For the reflector thing, I was thinking about using the one from the fender.  Canadian model has a metal plate that could be mounted with a 3M super tape...  I guess...   

[AUSSIE_FLSTFSE]

Where do you get these LED strips.

[dahsen]

Where do you get these LED strips.

Www.chromeglow.com

[89Speedy]

[/quote]Here's a new product from Custom Dynamics.  Now that the Breakout has been going on for 2 years, we're seeing more products specifically made for our bikes.

http://www.customdynamics.com/Images2/photolight.jpg

[ChopperPilot]

Here's a new product from Custom Dynamics.  Now that the Breakout has been going on for 2 years, we're seeing more products specifically made for our bikes.

http://www.customdynamics.com/Images2/photolight.jpg

Nice to see new products for the Breakout, this light bar looks good.

[rodrocket]

Here's a new product from Custom Dynamics.  Now that the Breakout has been going on for 2 years, we're seeing more products specifically made for our bikes.

http://www.customdynamics.com/Images2/photolight.jpg

here is another option but very pricey
http://www.cvoharley.com/smf/index.php?topic=96021.msg1250083#msg1250083

[GeekBiker]

So, stupid question.  If one had just the LED bar that acted as both running, brake and signal lights, would the stock lights on either side of the fender be necessary?

[WestCoastRuss]

So, stupid question.  If one had just the LED bar that acted as both running, brake and signal lights, would the stock lights on either side of the fender be necessary?

May depend on what state you live in......However......the more lights the better you can be seen!!!  Myself I want lots of lights behind me.

[Jswerve]

May depend on what state you live in......However......the more lights the better you can be seen!!!  Myself I want lots of lights behind me.

I agree. I added a lot to my tour pak.