www.CVOHARLEY.com

CVO Technical => Twin Cam => Topic started by: highwayking on June 22, 2018, 01:49:29 PM

Title: Need Part Numbers
Post by: highwayking on June 22, 2018, 01:49:29 PM

Can somebody give me the part numbers for the S&S Lifters and adjustable push rods to fit my 2007 FLHTCUSE2. Thanks in advance.

Title: Re: Need Part Numbers
Post by: KGB on June 23, 2018, 08:40:20 AM

There are 3 choices for the lifters depending on what you want:

https://www.sscycle.com/products/high-performance-hydraulic-tappets-for-1999-17-big-twins-and-2000-18-hd-sportster-and-2017-18-m8-models/ (https://www.sscycle.com/products/high-performance-hydraulic-tappets-for-1999-17-big-twins-and-2000-18-hd-sportster-and-2017-18-m8-models/)

https://www.sscycle.com/products/premium-high-performance-tappet-set-with-hl2t-kit-for-1999-17-big-twins-and-2000-18-hd-sportster-and-2017-18-m8-models/ (https://www.sscycle.com/products/premium-high-performance-tappet-set-with-hl2t-kit-for-1999-17-big-twins-and-2000-18-hd-sportster-and-2017-18-m8-models/)

https://www.sscycle.com/products/premium-high-performance-tappet-set-without-hl2t-kit-for-1999-17-hd-big-twins-2000-18-hd-sportster-and-2017-18-m8-models/ (https://www.sscycle.com/products/premium-high-performance-tappet-set-without-hl2t-kit-for-1999-17-hd-big-twins-2000-18-hd-sportster-and-2017-18-m8-models/)


There are two different sets of adjustible pushrods you can use, the regular which requires the removal of the tappet guides when removing and the quikee adjustible pushrods that dont.

https://www.sscycle.com/products/quickee-adjustable-pushrods-for-1999-15-big-twins-w/-stock-engine-height-point-050-inch/ (https://www.sscycle.com/products/quickee-adjustable-pushrods-for-1999-15-big-twins-w/-stock-engine-height-point-050-inch/)

https://www.sscycle.com/products/adjustable-pushrod-kits-for-1999-16-hd-big-twins/ (https://www.sscycle.com/products/adjustable-pushrod-kits-for-1999-16-hd-big-twins/)

Title: Re: Need Part Numbers
Post by: grc on June 23, 2018, 09:03:35 AM

If you are just changing lifters and not making any wild performance upgrades, I'd recommend you NOT get the lifters with the limiters (HL2T in S&S speak).  There is no benefit for the typical Harley street rider.

If you want the quickest way to change the lifters without removing the rocker covers, the Quickee adjustable pushrod is the way to go if you want to use S&S.  The SE tapered adjustable pushrod is also a good choice.  You can use the stock one piece rods if you decide to pull the rocker covers.

SE Tapered Adjustable Pushrods:
P/N  17900032    With Gloss Black Covers.  $189.95
P/N  18404-08     With Chrome Covers.  $184.95

JMHO - Jerry

Title: Re: Need Part Numbers
Post by: HD Street Performance on June 24, 2018, 10:24:59 AM

Good advise there.
Harleys pushrods are a good part for the average build.