Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 3 [All]

Author Topic: handle bars for 2016 roadglide  (Read 13828 times)

0 Members and 1 Guest are viewing this topic.

Bignate

  • New to the CVO group
  • Newbie
  • *
  • Offline Offline
  • Posts: 8
  • www.CVOHARLEY.com
    • DC


    • CVO1: 2016 Roadglide Ultra
handle bars for 2016 roadglide
« on: October 22, 2015, 07:57:53 PM »

good afternoon folks just wanted to find out whats available for the new cvo roadglide in apes seeing that i am 6'5 and in need of more room.  I am brand new to the site still feeling my way around the forum.
Logged

ACfixer

  • Global Warming Enthusiast
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 268
    • TN


    • CVO1: 2015 FLTRUSE
    • CVO2: 2005 FLSTSCi Springer
    • CVO3: Honda Pioneer 1000-5
Re: handle bars for 2016 roadglide
« Reply #1 on: October 22, 2015, 08:45:50 PM »

Welcome to the site Nate. Yeah, there are some options and I'll let those that have switched their bars out chime in. Some require all the goodies, extended wiring and brake/clutch lines and some others can work with the existing. I'm 6'2" and I removed the stopper pin in my bars and moved them up and I'm okay with it.
Logged
2015 FLTRUSE Abyss Blue/Crushed Sapphire
15" Freedom shield - TTS Tuned by Fullsac - Fullsac DX pipe - 2.0 cores. 96HP - 113TQ

Bignate

  • New to the CVO group
  • Newbie
  • *
  • Offline Offline
  • Posts: 8
  • www.CVOHARLEY.com
    • DC


    • CVO1: 2016 Roadglide Ultra
Re: handle bars for 2016 roadglide
« Reply #2 on: October 22, 2015, 08:56:17 PM »

Thanks ACfixer was it easy to take off the electric lock switch when you took the pin out
Logged

King Glide

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1290
  • It's still Good To Be King !
    • LA


    • CVO1: 2016 Roadglide Ultra
    • CVO2: 2014 Ultra Limited
    • CVO3: 2011 Roadglide Ultra
Re: handle bars for 2016 roadglide
« Reply #3 on: October 22, 2015, 09:51:13 PM »

Yes it's easy, take a small blade screwdriver, at the bottom center gently push in the slot and lift the cover slightly and pull it straight back. Put a towel over the tank, Take the bars out of the clamp and gently roll them over onto the tank, use vice grips to pull the pin. Wiggling the vice grips and carefully using a large screwdriver as a pry bar under the vice grips, it will come right out.
Sorry forgot to remove the two screws holding the cover and lift it off.
Logged
Got another shark and there's blood in the wind.
Back to the dark side !
  Personalized Plate
         GD2BKG

ACfixer

  • Global Warming Enthusiast
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 268
    • TN


    • CVO1: 2015 FLTRUSE
    • CVO2: 2005 FLSTSCi Springer
    • CVO3: Honda Pioneer 1000-5
Re: handle bars for 2016 roadglide
« Reply #4 on: October 22, 2015, 10:24:20 PM »

^^^ Yes, and it's easy to break as well. Fortunately I learned from the guys here that weren't so lucky. ;)

Check into the new members forum and introduce yourself Nate, there are some really kind and helpful folks here.  :2vrolijk_21:
« Last Edit: October 22, 2015, 10:26:41 PM by ACfixer »
Logged
2015 FLTRUSE Abyss Blue/Crushed Sapphire
15" Freedom shield - TTS Tuned by Fullsac - Fullsac DX pipe - 2.0 cores. 96HP - 113TQ

Bignate

  • New to the CVO group
  • Newbie
  • *
  • Offline Offline
  • Posts: 8
  • www.CVOHARLEY.com
    • DC


    • CVO1: 2016 Roadglide Ultra
Re: handle bars for 2016 roadglide
« Reply #5 on: October 22, 2015, 10:32:10 PM »

Thanks for the info
Logged

Bignate

  • New to the CVO group
  • Newbie
  • *
  • Offline Offline
  • Posts: 8
  • www.CVOHARLEY.com
    • DC


    • CVO1: 2016 Roadglide Ultra
Re: handle bars for 2016 roadglide
« Reply #6 on: October 22, 2015, 10:33:49 PM »

Thanks King Glide
Logged

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: handle bars for 2016 roadglide
« Reply #7 on: October 23, 2015, 07:49:25 PM »

I had the dealer remove the pin at delivery.   8)  I had one of the very first 15's delivered, and the first by Smoky Mountain HD.

I rode it like that for about 7 months waiting on the Paul Yaffee 14" Monkey bars I ordered from them.  They kept saying next month.  I canceled even though I have had those bars on 3 bikes.  Yaffe 14 inch monkey bars are about 15 to 15.5.  Require new lines and wires.

I went with Factory 47 Bars ( i believe formerly burly bars)  I went with 14".  They are really about 13.5 inches.  All stock wires and cables used.

I really like them.  If you were to go this route, make sure you get bars for the CVO, with out the holes for the handle bar controls like the regular 15/16 road glide have.

Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: handle bars for 2016 roadglide
« Reply #8 on: October 23, 2015, 07:51:29 PM »

Another picture of the Factory 47 bars, 14"

Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

Bignate

  • New to the CVO group
  • Newbie
  • *
  • Offline Offline
  • Posts: 8
  • www.CVOHARLEY.com
    • DC


    • CVO1: 2016 Roadglide Ultra
Re: handle bars for 2016 roadglide
« Reply #9 on: October 23, 2015, 09:53:57 PM »

Thanks Dave I may go that routw
Logged

fos41

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 199
Re: handle bars for 2016 roadglide
« Reply #10 on: October 24, 2015, 11:22:42 AM »

Are the `16 bars the same bend as the`15 CVO R.G.? Test rode a `1 recently had issues with the bar bend and position feeling crowded.

Thanks,
Donnie
Logged

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: handle bars for 2016 roadglide
« Reply #11 on: October 24, 2015, 07:31:22 PM »

15 SERGU and 16 SERGU have the same bars.

The 15 RG and RGS have shorter bars, same with the 16 RG, RGS and RGU.

Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

FlyJS41

  • Guest
Re: handle bars for 2016 roadglide
« Reply #12 on: October 27, 2015, 09:36:36 PM »

Another route you might consider is Wild 1.  I've had their bars on two baggers and found them to my liking.  The stock bars on my '15 FLTRUSE are a nice height for me but the wrist angle isn't all that comfortable, so Wild 1 is on my short list for OEM replacement.
Logged

SDCVO

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2917
  • 19 CVO RG-12 CVO RG
    • CA


    • CVO1: 2019 Mako Shark Roadglide
    • CVO2: 2012 Maple Roadglide
    • CVO3: 2019 BMW K1600 Grand America
Re: handle bars for 2016 roadglide
« Reply #13 on: October 27, 2015, 11:40:49 PM »

Another route you might consider is Wild 1.  I've had their bars on two baggers and found them to my liking.  The stock bars on my '15 FLTRUSE are a nice height for me but the wrist angle isn't all that comfortable, so Wild 1 is on my short list for OEM replacement.
Just put 14 inch Wild 1 Reapers on my 12 RG and love them
Logged
Alan

Bignate

  • New to the CVO group
  • Newbie
  • *
  • Offline Offline
  • Posts: 8
  • www.CVOHARLEY.com
    • DC


    • CVO1: 2016 Roadglide Ultra
Re: handle bars for 2016 roadglide
« Reply #14 on: October 28, 2015, 01:43:46 AM »

Thank you for the wild1 and the reapers I will take a look at those
Logged

TNCarters

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 651

    • CVO1: 2015 CVO RGU
    • CVO2: 2011 Ultra Limited (Traded)
Re: handle bars for 2016 roadglide
« Reply #15 on: November 09, 2015, 10:13:11 AM »

Did not find the stock bars too bad for my 6'2" frame.  Guess I have longer legs than arms for my size.  Just to see how I like it I went in this weekend removed the pin and rolled them up forward just short of my Freedon Shield when at full lock.  Rode about 30 minutes and decided I did not like it that far foward so went back and pulled back about halfway between that location and stock pinned location.  Have not adjusted the rotation on the controls yet.  What started this was I had to pull the speedo/tach cover to install an Aux power switch so thought why not try a different bar location.  Yes that tab under the fork lock cover is very flimsy.
Logged
Ron
2015 CVO RGU
Burgundy Blaze

Tut

  • Tut
  • Newbie
  • *
  • Offline Offline
  • Posts: 20
  • Three CVO's Ultras now The Road Glide CVO
    • GA


    • CVO1: 07' Ultra CVO
    • CVO2: 12' Ultra CVO
    • CVO3: 16' RG Ultra CVO
Re: handle bars for 2016 roadglide
« Reply #16 on: January 04, 2016, 10:29:36 AM »

Ya'll have me sweating!! I pick up my 16 RG CVO Ultra in two weeks. I'm 6'1" 201 lbs and prior to purchase I didn't feel handle bar problems so a few miles will tell... 
What is with this "pin" everyone is talking about and the "removal" at delivery?
I have always had the Ultra's, from 2012 back to 1983 so this RG will be interesting. It's good to get back on the CVO Forum!!
« Last Edit: January 04, 2016, 10:58:20 AM by Tut »
Logged
Hoping I like the Road Glide CVO!!!  Pickup on 1-21-16... I just love these New Adventures

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: handle bars for 2016 roadglide
« Reply #17 on: January 04, 2016, 08:19:56 PM »

Ya'll have me sweating!! I pick up my 16 RG CVO Ultra in two weeks. I'm 6'1" 201 lbs and prior to purchase I didn't feel handle bar problems so a few miles will tell... 
What is with this "pin" everyone is talking about and the "removal" at delivery?
I have always had the Ultra's, from 2012 back to 1983 so this RG will be interesting. It's good to get back on the CVO Forum!!
The new redesigned road glide 15 and newer have a pin in the handle bar clamp area.  It really restricts how far you can rotate the bars.  I got the first 15 CVO delivered at my dealership in Sept of 14.  At 6'1" the bars were way to close to my lap.  I had them pull the pin, and we rotated the bars up so they were in a more comfortable position for me.  The regular Road Glides have the same pin plus on for each handle bar grip.

Once rotated I liked the height of the bar and the reach.  However I did not like the grip angle so I am running factory 47 14" bars, really like them.
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5184
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: handle bars for 2016 roadglide
« Reply #18 on: January 04, 2016, 08:22:05 PM »

Ya'll have me sweating!! I pick up my 16 RG CVO Ultra in two weeks. I'm 6'1" 201 lbs and prior to purchase I didn't feel handle bar problems so a few miles will tell... 
What is with this "pin" everyone is talking about and the "removal" at delivery?
I have always had the Ultra's, from 2012 back to 1983 so this RG will be interesting. It's good to get back on the CVO Forum!!
Here's a pix of it. You can see it in the middle of the bottom clamp.
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

Shawrco

  • Newbie
  • *
  • Offline Offline
  • Posts: 45
  • www.CVOHARLEY.com
    • GA


    • CVO1: 2015 FLTRUSE Carbon Dust/Autumn Sunset
    • CVO2: 2009 FLHTC Vivid Black (soon to be for sale!)
Re: handle bars for 2016 roadglide
« Reply #19 on: August 24, 2018, 05:01:52 PM »

The new redesigned road glide 15 and newer have a pin in the handle bar clamp area.  It really restricts how far you can rotate the bars.  I got the first 15 CVO delivered at my dealership in Sept of 14.  At 6'1" the bars were way to close to my lap.  I had them pull the pin, and we rotated the bars up so they were in a more comfortable position for me.  The regular Road Glides have the same pin plus on for each handle bar grip.

Once rotated I liked the height of the bar and the reach.  However I did not like the grip angle so I am running factory 47 14" bars, really like them.
So Dave, I have the same issue with mr stock ‘15 bars, height is good after pulling the pin and rotating forward, but wrist angle is not good - is that the pullback dimension in the specs. Do the Factory 47s have less pullback than the stock RGU bars?
Logged
Joe B

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: handle bars for 2016 roadglide
« Reply #20 on: August 25, 2018, 07:24:33 AM »

So Dave, I have the same issue with mr stock ‘15 bars, height is good after pulling the pin and rotating forward, but wrist angle is not good - is that the pullback dimension in the specs. Do the Factory 47s have less pullback than the stock RGU bars?

I think the pullback was about the same.  I liked the Factory 47 much better, better width and much better grip angle.  I Traded that bike in Sept 2016 with 44K on it.
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

Shawrco

  • Newbie
  • *
  • Offline Offline
  • Posts: 45
  • www.CVOHARLEY.com
    • GA


    • CVO1: 2015 FLTRUSE Carbon Dust/Autumn Sunset
    • CVO2: 2009 FLHTC Vivid Black (soon to be for sale!)
Re: handle bars for 2016 roadglide
« Reply #21 on: August 29, 2018, 02:47:24 PM »

I think the pullback was about the same.  I liked the Factory 47 much better, better width and much better grip angle.  I Traded that bike in Sept 2016 with 44K on it.
Sorry to bring up such an old thread... I've looked at the F47 website and the Signature bars say not for '15 CVO RG Ultra. I guess you must have had the Malo bars, which it appears they have discontinued. As I mentioned up above, I'm happy w/stock height - were you're 14" bars about the same height as stock? or would I need to go down to 12" to be about the same as stock? My main complaint is the grip angle, which I thought was equivalent to pull back. I was just looking again at their website for a phone # so I could call and discuss, but they don't put a number out there. Will keep looking.
Thanks again for the reply.
Joe B.
Logged
Joe B

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: handle bars for 2016 roadglide
« Reply #22 on: August 31, 2018, 08:08:33 AM »

I believe the 12" would be closer to stock hight.  Stock is 10" if I remember correct, My bet if the 12" were like my 14" bars, then an inch sorter than that in reality.
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

JRBish

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • www.CVOHARLEY.com
    • NC

Re: handle bars for 2016 roadglide
« Reply #23 on: September 03, 2018, 03:10:42 AM »

Check out KSTkustoms.com bars.  They are great to work with. 
Logged

Shawrco

  • Newbie
  • *
  • Offline Offline
  • Posts: 45
  • www.CVOHARLEY.com
    • GA


    • CVO1: 2015 FLTRUSE Carbon Dust/Autumn Sunset
    • CVO2: 2009 FLHTC Vivid Black (soon to be for sale!)
Re: handle bars for 2016 roadglide
« Reply #24 on: September 03, 2018, 09:17:43 AM »

I believe the 12" would be closer to stock hight.  Stock is 10" if I remember correct, My bet if the 12" were like my 14" bars, then an inch sorter than that in reality.
Thanks, that's good info. I looked again at the F47 website and it appears the Malo bars were for pre-Rushmore bikes. I called them and talked to the receptionist, who couldn't answer why the Signatures didn't fit the 2015-17 bikes and said a tech would call me... haven't heard back from them.
I'll look at the KSTKustoms bars as suggested by JRBish (thanks for the tip)
Logged
Joe B

Cvostu

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5128

    • CVO1: 2023 Whiskey Neat road glide custom
    • CVO2: 2019 Mako Shark Fade road glide custom
Re: handle bars for 2016 roadglide
« Reply #25 on: September 03, 2018, 10:34:17 AM »

I went with the yaffe 14"on my 16 cvo ultra road glide. I'm pretty sure they would work on the 15. All the stock wiring and cables worked. I'm 6ft 3. Very happy with my choice.  Stuart.
« Last Edit: September 29, 2018, 11:44:40 AM by cvostu »
Logged

CAmike

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
  • www.CVOHARLEY.com
    • CA


    • CVO1: 2015 Road Glide Ultra CVO
Re: handle bars for 2016 roadglide
« Reply #26 on: September 28, 2018, 11:49:40 PM »

Spooky fast also makes bars for the 16 CVO. https://spookyfast.com/services
Logged

SDCVO

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2917
  • 19 CVO RG-12 CVO RG
    • CA


    • CVO1: 2019 Mako Shark Roadglide
    • CVO2: 2012 Maple Roadglide
    • CVO3: 2019 BMW K1600 Grand America
Re: handle bars for 2016 roadglide
« Reply #27 on: September 29, 2018, 12:31:33 AM »

I am switching from a 17 SG to a 19 RG which just came in. I run Yaffe's on my SG and woke up in the middle of the night last Sat in a panic realizing the bars would not switch over with every other mod I am switching. On Sunday I went online and saw that Yaffe's have been backordered for months. I am 6.2 (used to be 6.3..) and the stock bars kill my back so I didn't know what I was going to do. Went to this and a couple of other forums and saw where many were liking the F47's even more than the Yaffe's so went to their website and they were backordered also in 14 inch which is what I need. Monday morning I went on a mission to try and find Yaffe's in someones inventory and got the same story from all that they have been backordered forever and though Yaffe says will be available in early to mid Oct everyone I talked to told me not to count on it. I then tried calling F47 and they said they were backordered for 6 weeks. I asked them if anyone might have them in stock and she gave me a list of about 5 dealers in SoCal including the dealer about a mile away. I called them and bingo, 1 set of gloss black 14 Signatures that they had been holding for someone for a very long time and they said if I came in they would sell them to me. I had never even seen them in person (that I paid attention to) so I ran down there. They happened to have a RG in service with those bars on that I got to sit on and not only did they feel great, I absolutely love the meatier look of the 1.5 diameter. When I was paying for them I asked why they show different bars for the 16-17 CVO and parts mgr said they have been installing F47 on bikes for years including 16-17 CVO RG's and he had always ordered same bars but thought maybe the tech had to pull the pins on those years. When I was there they had a few new bikes in stock that they had put F47 12 inch bars on so think he knew what he was talking about.
« Last Edit: September 29, 2018, 12:33:50 AM by SDCVO »
Logged
Alan

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5184
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: handle bars for 2016 roadglide
« Reply #28 on: September 29, 2018, 06:34:00 AM »

I am switching from a 17 SG to a 19 RG which just came in. I run Yaffe's on my SG and woke up in the middle of the night last Sat in a panic realizing the bars would not switch over with every other mod I am switching. On Sunday I went online and saw that Yaffe's have been backordered for months. I am 6.2 (used to be 6.3..) and the stock bars kill my back so I didn't know what I was going to do. Went to this and a couple of other forums and saw where many were liking the F47's even more than the Yaffe's so went to their website and they were backordered also in 14 inch which is what I need. Monday morning I went on a mission to try and find Yaffe's in someones inventory and got the same story from all that they have been backordered forever and though Yaffe says will be available in early to mid Oct everyone I talked to told me not to count on it. I then tried calling F47 and they said they were backordered for 6 weeks. I asked them if anyone might have them in stock and she gave me a list of about 5 dealers in SoCal including the dealer about a mile away. I called them and bingo, 1 set of gloss black 14 Signatures that they had been holding for someone for a very long time and they said if I came in they would sell them to me. I had never even seen them in person (that I paid attention to) so I ran down there. They happened to have a RG in service with those bars on that I got to sit on and not only did they feel great, I absolutely love the meatier look of the 1.5 diameter. When I was paying for them I asked why they show different bars for the 16-17 CVO and parts mgr said they have been installing F47 on bikes for years including 16-17 CVO RG's and he had always ordered same bars but thought maybe the tech had to pull the pins on those years. When I was there they had a few new bikes in stock that they had put F47 12 inch bars on so think he knew what he was talking about.
Do you have the Yaffe's on your Maple? Reason I ask is the Dave had a '15 like mine and went with the F47 instead of the Yaffe's due to back order situation back then. He has said that the F47 seem to be shorter than the Yaffe's although both are sold as 14". Was looking for another comparison or measurement done side by side.
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

SDCVO

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2917
  • 19 CVO RG-12 CVO RG
    • CA


    • CVO1: 2019 Mako Shark Roadglide
    • CVO2: 2012 Maple Roadglide
    • CVO3: 2019 BMW K1600 Grand America
Re: handle bars for 2016 roadglide
« Reply #29 on: September 29, 2018, 11:19:11 PM »

Do you have the Yaffe's on your Maple? Reason I ask is the Dave had a '15 like mine and went with the F47 instead of the Yaffe's due to back order situation back then. He has said that the F47 seem to be shorter than the Yaffe's although both are sold as 14". Was looking for another comparison or measurement done side by side.
I have Wild One Reapers on that bike. I like them but want glossy black on this bike. If I hadn't found the F47's I was thinking about getting them and powder coating.  Very comfortable bars.
Logged
Alan

09nessrg

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 92
    • FL

    • CVO1: 2018 CVO Limited
    • CVO2: 2012 Skunk CVO
    • CVO3: 2009 RG Custom
Re: handle bars for 2016 roadglide
« Reply #30 on: September 30, 2018, 12:49:19 AM »

Have Ness modular on my RG, adjustable & comfortable
Logged

DMize

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
Re: handle bars for 2016 roadglide
« Reply #31 on: November 18, 2018, 09:47:24 PM »

Anyone running the HD apes?
Logged

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5184
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: handle bars for 2016 roadglide
« Reply #32 on: November 19, 2018, 06:29:08 AM »

Anyone running the HD apes?

I didn't see anything on their site that would fit on the CVO for the 15 &16 years due to not having the handlebar pins in the controls.

I ordered a set of Vindicta Marauders for mine to do this winter.
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

DMize

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
Re: handle bars for 2016 roadglide
« Reply #33 on: November 20, 2018, 08:20:19 PM »

I didn't see anything on their site that would fit on the CVO for the 15 &16 years due to not having the handlebar pins in the controls.

I ordered a set of Vindicta Marauders for mine to do this winter.

Hmm. I thought the hd chizeled fit, but looks like its just roadglide not cvo.

Love the Marauders and the Factory 47 as well.

I'm not totally apposed to doing them myself, but I'm a little gun shy after doing my bars on the 2010... I got it but it was a pretty good PITA.
Logged

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5184
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: handle bars for 2016 roadglide
« Reply #34 on: November 20, 2018, 09:10:00 PM »

Hmm. I thought the hd chizeled fit, but looks like its just roadglide not cvo.

Love the Marauders and the Factory 47 as well.

I'm not totally apposed to doing them myself, but I'm a little gun shy after doing my bars on the 2010... I got it but it was a pretty good PITA.
Much easier with the can bus system. Not nearly as many wires.
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

DMize

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
Re: handle bars for 2016 roadglide
« Reply #35 on: January 17, 2019, 07:14:27 PM »

Much easier with the can bus system. Not nearly as many wires.

OBB. did you install those bars yet? Wondering how it went...
Logged
Pages: 1 2 3 [All]
 

Page created in 0.229 seconds with 22 queries.