Keep trying for the PPG formula. That should be released any time now. I remember when Typhoon maroon was withheld then at Christmas it popped up. So did the Electric orange back in 09. Always could try the spectrometer (spelling?) and let it create a mixable formula then tint to match if necessary from there. I will say though, if you are trying to buy paint vs painted parts, the cost of primer, sealer, base color, clearcoat all hardners, sandpaper, tape etc makes it a tough call. I paid over $80 for last pint of color I bought and this is just the start + you need a person to spray and a GOOD downdraft booth to prevent dust and some of the base colors now are water base, you still use regular clear, but you need a LOT of airflow to make the water base flow and cure between coats. Not a simple world. I know a couple shops here that spent $20K updating there booths for water base airflow. SO maybe a painted part is not so expensive in the long run if you can get it.