Topic: New Agitator Air Breather (Read 9291 times)

WVHoop · « **on:** November 18, 2012, 09:56:14 AM »

Has anyone seen or installed the new agitator air breather, part#29400064? I think it looks really awesome & that it will match the wheels on my '12 SESG means I'm going to have to have one. I would also like to install a throttle body cover, part#61300109 behind that breather but I don't know if it will fit. Any helpful knowledge would surely be greatly appreciated. Thank You

sesto123 · « **Reply #1 on:** November 18, 2012, 06:57:13 PM »

I have this on my flhrse5. It looks great. However, we have tried 2 different throttle body covers, the HD one for the heavy breather and the Kury one. Neither fit. Hopefully the MoCo will come out with one soon.

sesto123 · « **Reply #2 on:** November 18, 2012, 07:00:20 PM »

I'll get a pic posted for you when I can get to my laptop.

Aussie · « **Reply #3 on:** November 18, 2012, 08:23:43 PM »

I was thinking the same, they look great and match the wheels
Photo's will be great

LovemyCVOgirl · « **Reply #4 on:** November 18, 2012, 11:20:27 PM »

The Kuryakyn will fit with a little modifying.

sesto123 · « **Reply #5 on:** November 19, 2012, 10:08:58 AM »

not the best format, but i think it uploaded-

rayson56 · « **Reply #6 on:** November 19, 2012, 04:59:35 PM »

Looking good sesto. I've got the black and chrome one on order. It's backordered from the MOCO.

FLSTFI Dave · « **Reply #7 on:** November 20, 2012, 06:33:05 AM »

Quote from: sesto123 on November 19, 2012, 10:08:58 AM

not the best format, but i think it uploaded-

I put that one on my FLHRSE5 anniversary the day I got the bike.

I too want a cover to go behind it to hide the electrics.

I looked at the black and chrome one, its really a brushed look like on the 12 CVO road glide wheels.

Aussie · « **Reply #8 on:** November 27, 2012, 04:24:06 AM »

Quote from: sesto123 on November 19, 2012, 10:08:58 AM

not the best format, but i think it uploaded-

Any chance of posting a high resolution picture of the road king with the agitator air cleaner.

sesto123 · « **Reply #9 on:** November 27, 2012, 10:29:58 AM »

Quote from: Aussie on November 27, 2012, 04:24:06 AM

Any chance of posting a high resolution picture of the road king with the agitator air cleaner.

Send me a PM with your email, and I will email one to you. Not too sure how high res it'll be as I took that pic with my phone. I may have a few others I can send you too. I'd snap a new one for you,but it is in the shop under going a little cosmetic surgery and a pace maker.

rayson56 · « **Reply #10 on:** November 30, 2012, 10:31:06 PM »

Quote from: WVHoop on November 30, 2012, 10:25:30 PM

Here is what I did to mine.

What is the part # for the throttle body cover that you used. Did you have to do any modifications to it? It looks great! Good job.

WVHoop · « **Reply #11 on:** November 30, 2012, 10:33:11 PM »

Finished installing my new agitator breather today.

WVHoop · « **Reply #12 on:** November 30, 2012, 10:38:28 PM »

It's for the heavy breather, yes I had to modify it extensively. What you see is just the lower portion of the original that I cut off with a dremel cut off wheel. It's attached to the back plate with six 6/32 button head screws,

Aussie · « **Reply #13 on:** December 01, 2012, 01:19:15 AM »

Quote from: WVHoop on November 30, 2012, 10:33:11 PM

Finished installing my new agitator breather today.

That looks neat, looks better than the standard air cleaner.

Can you take a few more pictures,
Looking from riders position to give me an idea how far out it stands from tank compaired to original air cleaner.
Close up side on showing both cylinders. (Engine)

Does it sound any different on the intake compaired to the standard air cleaner?
What did you do to make the throttle body cover fit?
Is a retune required changing out from standard to Agitator, I have only just had a dyno tune and if possible would like to avoid a retune.

WVHoop · « **Reply #14 on:** December 01, 2012, 06:40:02 PM »

Aussie,

I have to take everything back off to install the o-rings & to loctite all the bolts. When I do this I'll post more pics for you.

Aussie · « **Reply #15 on:** December 01, 2012, 06:45:30 PM »

Quote from: WVHoop on December 01, 2012, 06:40:02 PM

Aussie,

I have to take everything back off to install the o-rings & to loctite all the bolts. When I do this I'll post more pics for you.

Cool, look forward to the pictures.

Sarhan · « **Reply #16 on:** December 02, 2012, 08:16:32 AM »

Please advise the clearance between the leg and filter?

FLSTFI Dave · « **Reply #17 on:** December 02, 2012, 09:01:50 AM »

Quote from: WVHoop on December 01, 2012, 06:40:02 PM

Aussie,

I have to take everything back off to install the o-rings & to loctite all the bolts. When I do this I'll post more pics for you.

I would love to see what the part looks like after you modified it with out any thing covering it. I want to do that for mine.

WVHoop · « **Reply #18 on:** December 02, 2012, 01:39:53 PM »

Here's some more in depth photos, I just hope they aren't upside down. Anyways, good luck.

WVHoop · « **Reply #19 on:** December 02, 2012, 01:41:35 PM »

Another

WVHoop · « **Reply #20 on:** December 02, 2012, 01:43:08 PM »

Another from the back

WVHoop · « **Reply #21 on:** December 02, 2012, 01:45:16 PM »

I used six 6-32 a screws to attach it to the backing plate.

WVHoop · « **Reply #22 on:** December 02, 2012, 01:47:14 PM »

From the front.

WVHoop · « **Reply #23 on:** December 02, 2012, 01:48:50 PM »

On the bike.

WVHoop · « **Reply #24 on:** December 02, 2012, 01:50:19 PM »

Another

WVHoop · « **Reply #25 on:** December 02, 2012, 01:54:51 PM »

Done........Thankfully & surprisingly didn't need any touch-up paint afterwards.

WVHoop · « **Reply #26 on:** December 02, 2012, 02:01:29 PM »

Clears my knee completely but I'm only 5'8" The only issue might be reaching for the rear brake but I think I can get used to it. I hope this has helped you guys, anymore questions please feel free to ask.

WVHoop · « **Reply #27 on:** December 02, 2012, 02:02:36 PM »

Brake

WVHoop · « **Reply #28 on:** December 02, 2012, 02:09:45 PM »

Another

JJAA · « **Reply #29 on:** December 02, 2012, 06:55:28 PM »

Supremes up side down boyz member

rayson56 · « **Reply #30 on:** December 02, 2012, 07:21:58 PM »

Great job! Thanks for all the great shots.

LovemyCVOgirl · « **Reply #31 on:** December 02, 2012, 07:25:04 PM »

That really looks nice.

Thanks for the pictures. I will have to talk to Santa

about this new toy.

Aussie · « **Reply #32 on:** December 02, 2012, 08:26:41 PM »

Thank you for those fantastic pictures, looks great

How did you mount the cover after cutting the centre piece out?

WVHoop · « **Reply #33 on:** December 02, 2012, 08:31:07 PM »

I don't understand what you are asking Aussie. I mounted the wire cover with small 6-32 screws, I didn't alter the new air breather at all except to drill & tap the back plate to attach the chrome throttle body & wire cover.

Aussie · « **Reply #34 on:** December 02, 2012, 09:13:29 PM »

Quote from: WVHoop on December 02, 2012, 08:31:07 PM

I don't understand what you are asking Aussie. I mounted the wire cover with small 6-32 screws, I didn't alter the new air breather at all except to drill & tap the back plate to attach the chrome throttle body & wire cover.

Had a better look at the pictures and see you have drilled and tapped holes after cutting out the centre piece of the throttle body cover.

http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448777479&FOLDER%3C%3Efolder_id=2534374302320149&ASSORTMENT%3C%3East_id=2534374302320149&bmUID=1354500682783&bmLocale=en_US

WVHoop · « **Reply #35 on:** December 02, 2012, 09:18:58 PM »

Aussie,

I hope the pics helped you.

Aussie · « **Reply #36 on:** December 02, 2012, 09:24:01 PM »

Quote from: WVHoop on December 02, 2012, 09:18:58 PM

Aussie,

I hope the pics helped you.

Perfect, Thank you

lilcoot · « **Reply #37 on:** December 02, 2012, 10:28:22 PM »

I really like the cover WVHoop put on. I wanted to use that one, but was told it would only fit with the Heavy Breather intake, so I never pursued it. The best looking option, by far, IMO. I may try it some time when I've run out of things I want (not anytime soon, in other words!).

What I did do was get an older intake cover from Jim at Metal Dragon. It's no longer in the HD catalogue, but maybe you could find an older one with the PN listed. Anyway, it fit perfectly with no modifications, and it covers up those gawd awful wires and connectors.

lilcoot · « **Reply #38 on:** December 02, 2012, 10:35:28 PM »

Also, I don't have any pictures of mine from above, but the Agitator appears to stick out into the rider's leg area more than the Roland Sands Designs intake that I installed. I can feel it if I squeeze the tank with my legs, but haven't noticed it during normal riding or braking.

Of course, me being bowlegged helps. $:-\$

Dan

FLSTFI Dave · « **Reply #39 on:** December 03, 2012, 09:16:55 AM »

Quote from: rayson56 on December 02, 2012, 07:21:58 PM

Great job! Thanks for all the great shots.

X2

Great job, may try that on mine.

rayson56 · « **Reply #40 on:** December 03, 2012, 12:12:13 PM »

Quote from: lilcoot on December 02, 2012, 10:28:22 PM

I really like the cover WVHoop put on. I wanted to use that one, but was told it would only fit with the Heavy Breather intake, so I never pursued it. The best looking option, by far, IMO. I may try it some time when I've run out of things I want (not anytime soon, in other words!).

What I did do was get an older intake cover from Jim at Metal Dragon. It's no longer in the HD catalogue, but maybe you could find an older one with the PN listed. Anyway, it fit perfectly with no modifications, and it covers up those gawd awful wires and connectors.

PN listed? Please list part #. Thanks for the info and picture.

WVHoop · « **Reply #41 on:** December 03, 2012, 03:38:40 PM »

Part#61300109 is what I used to cut what I wanted to use.

Author Topic: New Agitator Air Breather (Read 9291 times)