Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[BeeCVOBreakOut]

I've ordered a set of 16" Hiballs from Burleigh Bars. If all goes will they should be fitted by the time I get back from holidays.

Those look pretty darn good on that bike

[BeeCVOBreakOut]

Here's a set of carlini apes 

Those are huge. I'd definitely hang from those.

[KLB0]

I believe the Bassani exhaust thread video bike has the CVO Convertible Apes??

[24v]

Here is my standard with 14" Carlini Pist apes and Fatboy risers.

[Nicky Pass]

Here is my standard with 14" Carlini Pist apes and Fatboy risers.

Those are the PERFECT apes for the Breakout!  That looks great...post more pics!

[24v]

Thanks, here's a few more.

[Nicky Pass]

What did you do with the speedo?

[13brkoutCVO]

Thanks, here's a few more.

Looks Badass!

[24v]

What did you do with the speedo?

I removed it for now.  I ordered the CVO risers but they are on backorder and keep getting pushed back.  My back was sick of the stock bars, so I just used Fatboy risers to get the bars on for now.

[cambo]

I (virtually) moded sandman's 16" evil apes to 10 inches and I think this is what I will end up with. The bike looks great either way but I am more comfortable with the 10" rise.



Now time for finding out all that's needed to pull this off. One thing I don't think I need to worry about with the 10" bar is relocating the turn signals. What do you guys think?

Cam

[cambo]

And here's me riding the virtual vs actual bike:

[CVOSE Breakout]

Very clever my friend. And it looks so much more comfortable too.
Dave

[KLB0]

Now time for finding out all that's needed to pull this off. One thing I don't think I need to worry about with the 10" bar is relocating the turn signals. What do you guys think?

Cam

That's my question also.  Sandman's relocation kit is my #1 choice now... but the relocation kit to the front  forks looks too much like an add on-and requires a little more rewiring so I am considering the mirrors with turn signals in them but I'm not a fan of their shape.  Also thinking about using just the turn signal stems from the V-Rod muscle, but online HD store says they won't fit the CVO BO. 

[24v]

You don't have to relocate the signals to do apes.  The wire for the signals goes from the hand controls into the signal.  Most just don't like the look of them after apes. 
As for the "rewiring" to run them down low, that is super easy.  You just buy a plug end and connectors at the local dealer and plug the new signals in right at the neck on the right side.  There is a plug hiding there just under the gas tank.  You can get to it without removing anything.

[KLB0]

thanks 24v!