Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[skippy]

Here is my standard with 14" Carlini Pist apes and Fatboy risers.

                                                                                                                                                                             What about the foot peg  who and how much$   

[24v]

What about the foot peg  who and how much$   

One of a kind.  I searched long and hard for the right pedals.  Originally I bought them and used adapters to make them work with the stock peg mount, but those stuck out too far.  So I took them to a local fabrication shop, and had them cut the threads off.  Then they cut the end of the stock peg and welded the two together.

Here is a pic of the pedals with the adapters.


Here is a pic after they were welded together.


Here is a link to the pedals I used.
http://pointoneracing.myshopify.com/collections/products/products/podium-pedal

Here is the adapters if you wanted to go that route.
http://www.bungking.com/universal-footpeg-adapter-for-bmx-pedals.html

Here is a good vendor that sells other styles of pedals that will bolt right on.
http://www.dkcustomproducts.com/Footpegs_c9.htm

[KLB0]

Todd Cycle apes, love'm,,

[CowboyBagger]

Todd Cycle apes, love'm,,

What style or height are those?

Cowboy

[cvo1717]

Those are nice bars .They look great!

[KLB0]

What style or height are those?

Cowboy

Todd's Cycle 1 1/4 Strip Bar 10"- I have the 1 1/2 bars 10" version but none of the local shops could fab or mod the risers to fit. Damn speedo riser. 

[RedMoon]

Todd's Cycle 1 1/4 Strip Bar 10"- I have the 1 1/2 bars 10" version but none of the local shops could fab or mod the risers to fit. Damn speedo riser. 

This one was on facebook -  Fitted cvo convertible bars on cvo breakout .

[CowboyBagger]

On the CVO Breakout, is the handlebar clamp area 1.25" or 1.00"?

Cowboy

[RedMoon]

On the CVO Breakout, is the handlebar clamp area 1.25" or 1.00"?

Cowboy

1.25"

[dlaws01]

1.25"

Can you give the specific model number?  I was looking and couldn't find the !0" apes with 1.25" diameter at the riser clamping area.  I'm trying to find some for my springer without having to replace the stock risers.  Thanks.

[KLB0]

Can you give the specific model number?  I was looking and couldn't find the !0" apes with 1.25" diameter at the riser clamping area.  I'm trying to find some for my springer without having to replace the stock risers.  Thanks.

http://www.toddscycle.com/n_parts/n_parts_bars_risers.html

Todd's has  Springer Apes

[fxsbsefox]

I ordered Carlini 14" Evil apes for throttle by wire. They're stepped, but Wild1Inc sells a 1" to 1-1/4" adapter that will fix that problem. Will post pix when finished.

[psdj52]

Todd Cycle apes, love'm,,

I have to say I didn't think the Breakout with apes looks good. I use to have a Crossbones and loved the look on that bike. Now seeing your setup with those size apes, I do like it. I think the 10's are the way to go. This look is definitely creeping on my to do list. May I ask what the complete setup cost you? Assuming you had to get new cables as well.

[KLB0]

Bars were 270, new custom lines were about 100, and shop time.  Definitely no remorse on changing the look either!

[Bretto]

Mmm though I had posted pics here... Anyway 16" High Ball from Burleigh Bars Australia.