Topic: Gas gauge seems way off?? (Read 15321 times)

JCZ · « **Reply #45 on:** October 12, 2009, 06:11:57 PM »

It's easier to read if you get a glass tube made for it.

sadunbar · « **Reply #46 on:** October 12, 2009, 06:56:04 PM »

Quote from: grc on October 12, 2009, 03:44:06 PM

If you really want to know for sure, all you need is some clear tubing, same size drill bit, and some JB Weld for fuel tank repairs. Drill a hole at the top of the tank, another hole at the bottom, then run the clear tubing on the outside of the tank from the top hole to the bottom hole. Seal the tubing to the tank with the JB Weld, and you now have the absolute most accurate gauge ever to grace a Harley.

Jerry

Seal the tubing to the tank with the JB Weld, and you now have the ~~absolute most~~ FIRST AND ONLY accurate gauge ever to grace a Harley.

mjb765 · « **Reply #47 on:** October 12, 2009, 08:30:08 PM »

Now I guess I should go buy some JB Weld---yeah..running right to the store now

grc · « **Reply #48 on:** October 12, 2009, 08:48:31 PM »

I'm guessing from the feedback so far that my suggestion isn't meeting with a lot of approval.

How about if I went a little more upscale and used a chrome tube with a clear window in it?

Jerry

Author Topic: Gas gauge seems way off?? (Read 15321 times)

JCZ

Re: Gas gauge seems way off??

sadunbar

Re: Gas gauge seems way off??

mjb765

Re: Gas gauge seems way off??

grc

Re: Gas gauge seems way off??